Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Arlington, WA
Arlington’s gate repair work comes with a specific set of local conditions: expansive clay soil that shifts posts out of plumb, summer heat that dries out wood frames, and aging 1970s-to-1990s housing stock reaching its replacement cycle all at once. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on one thing only: gates that latch, swing, and open the way they should. Whether it’s a sagging wood driveway gate in a north Arlington neighborhood or an ornamental iron entry gate with HOA style requirements, call (626) 649-4572 and a live person picks up.
Why Arlington Homes Are Different
Arlington sits on Blackland Prairie clay, and that single fact shapes more of our work here than any other. This soil swells dramatically after spring rain and contracts just as hard during summer droughts, which heaves and tilts gate posts out of plumb year after year. Post-reset and re-alignment are recurring service calls in Arlington, not one-time fixes, and homeowners learn that quickly after their first gate starts dragging against the latch side.
Most of Arlington’s residential stock was built in the 1970s through the mid-1990s as suburban tract development. Those wood privacy fences and swing gates are now hitting end-of-life together, which means we see a lot of original posts that have rotted or fractured from decades of soil movement. On top of that, many mid-2000s HOA communities in south and west Arlington require ornamental steel or wrought-iron driveway gates with specific style rules, so homeowners often replace rather than patch when a gate fails. The February 2021 ice storm still shows up in our dispatch notes too: hinges, latches, and automated operators that cracked or seized during that freeze were never properly replaced on a surprising number of properties, and that deferred work is still calling in.
Our Main Arlington Services
Three services carry most of the calls we get from Arlington homeowners, and each has its own page with local pricing, details on the work, and specifics on the equipment we repair or install.
Gate Repair in Arlington
A dragging gate in Arlington is usually a post problem before it’s a hinge problem, because the clay soil under this city never stops moving. Gate Repair in Arlington covers hinge replacement, latch alignment, post reset, wood frame repair, and hardware upgrades, all handled on-site. We lay drop cloths before we work inside a fence line, put on shoe covers if we’re stepping into a garage or mudroom, and send a photo of the cleanup before we leave. The 365-Day Done Right Promise covers the repair for a full year.
Gate Installation in Arlington
New gate installation in Arlington typically means either replacing a failed 1980s wood gate with a sturdier frame, or meeting an HOA requirement for ornamental steel in south or west Arlington. Gate Installation in Arlington covers tear-out of the old gate, post setting with concrete appropriate for our clay soil, hinge mounting, latch alignment, and a written price before any work begins. We measure, quote, and schedule rather than patch, because a gate installed against Arlington’s soil movement is the difference between a gate that lasts and one that needs a re-level in eighteen months.
Electric Gate Repair in Arlington
Electric gate operators around Arlington live rough, especially on the west side near the stadium corridors where duty cycles on event days far exceed what residential equipment was built for. Electric Gate Repair in Arlington covers diagnostic work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, safety edge and photo eye replacement, and board or arm swaps. We track the local failure patterns carefully because a gate operator here may have already run through years of residential-grade cycles in a single season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Arlington
We’re factory-trained on the brands families in Arlington actually have: Viking, Ghost Controls, DoorKing, and Elite, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We keep common parts and safety edges stocked for quick turnaround, and our techs know which operators hold up on Arlington’s punishing west-side driveways. See our brands page for the full list.
Pricing for Gate Company in Arlington, WA
| Service | Typical range in Arlington |
|---|---|
| Gate latch replacement | $140 - $220 |
| Hinge replacement (pair) | $180 - $320 |
| Post reset / re-alignment | $240 - $420 |
| Wood gate frame repair | $260 - $480 |
| Full wood gate replacement | $600 - $1,100 |
| Ornamental steel gate replacement | $900 - $1,800 |
| Electric gate diagnostic visit | $95 - $145 |
| Operator arm or board replacement | $380 - $780 |
| Safety edge / photo eye replacement | $180 - $380 |
| Full electric operator installation | $1,400 - $2,600 |
What pushes a price toward the top of these ranges in Arlington is usually soil: a post that needs a deeper footing or an operator rail that has been working against a shifted column for months. You’ll always see the exact number in writing before we touch anything, and there’s never pressure to accept it.
Neighborhoods We Serve in Arlington
We work across Arlington’s full footprint, from the older frame neighborhoods north of Interstate 20 to the HOA-governed communities on the south and west sides and the commercial corridors near the stadiums. Response for emergency gate issues runs roughly two hours within Arlington proper, and we can schedule non-urgent work around school pickups, nap time, or a day off.
- Dalworthington Gardens
- Pantego
- North Arlington
- Southeast Arlington
- West Arlington (stadium corridor)
Service Area – Cities Near Arlington
We serve Arlington directly and also schedule work in neighboring communities when the job needs a dedicated gate specialist. We cover Marysville, WA, Granite Falls, WA, Lake Stevens, WA, and Stanwood, WA. If you’re just outside one of these areas, call and we’ll tell you straight whether we can get to your gate.
Serving Arlington, WA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Arlington
For a gate that won’t close or a safety eye knocked out, we typically reach most Arlington addresses within about two hours. A live person answers the phone 24/7, so you’ll get a straight answer on timing, not a voicemail. Call (626) 649-4572 and we’ll give you a window before the truck rolls.
Many mid-2000s HOA communities in south and west Arlington do mandate ornamental steel or wrought-iron driveway gates with style restrictions, and replacements usually need association approval before installation. We’ll work with your HOA’s stated requirements and can help you navigate what needs to be submitted. We never handle permit paperwork, but we’ll tell you what’s needed.
We cover all of Arlington, including Dalworthington Gardens, Pantego, and the unincorporated edges that still carry Arlington addresses. For emergency calls after hours, we still answer live and can dispatch to any part of the city. Estimates are always free, whether it’s a hinge or an entire new gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco