Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Everett, WA
Latch & Post Gate Repair handles gate repair, gate installation, and electric gate repair across Everett, WA. What makes Everett work different from the Eastside suburbs comes down to two things: salt air off Port Gardner Bay and a housing stock full of 1940s-1970s homes whose original gates are now well past their service life. Those two forces shape almost every job we do here. If your gate is sagging, sticking, or won’t open, call (626) 649-4572 and we’ll send a technician who knows exactly what Everett’s marine climate does to hardware.
Why Everett Homes Are Different
Everett sits directly on Port Gardner Bay, and that waterfront position means salt-laden air works on gate hardware year-round. We regularly see hinges, springs, and latches rust out in half the time they’d last in Bellevue or Redmond. Properties within a mile of the water – the Port of Everett, Naval Station Everett, the Bayside corridor – get hit hardest. We’ve opened gate operators near the waterfront that were installed five to seven years ago and found oxidation on components labeled stainless. Around those blocks, marine-grade 316 hardware and powder-coated aluminum aren’t upgrades; they’re the only realistic way to keep a gate working long-term.
The housing stock adds another layer. Everett’s core neighborhoods are full of post-WWII working-class homes built from the 1940s through the 1970s. Many still have their original wooden fence-and-gate systems, and those gates are decades past when they should have been replaced. Rot, warping, and sagging hardware are common. Newer subdivisions in south Everett and around Silver Lake tend toward vinyl and ornamental steel gates, which bring their own issues – UV degradation on vinyl and corrosion on steel – in this climate. Add in over 35 inches of annual rain and persistent humidity from October through April, and you get wooden boards that swell and bind at hinges seasonally, plus operators that need more frequent attention than they would in a drier inland market.
Our Main Everett Services
Most Everett homeowners call us for one of three things – a gate that has stopped working, a gate that needs replacing, or an electric operator that has failed. Each service has its own detailed page below, written specifically for Everett conditions.
Gate Repair in Everett
Most repairs in Everett center on the same few problems: rusted hinges and latches near the waterfront, rotted wooden posts in older neighborhoods, and sagging gates that no longer close square. We carry replacement hardware suited to the marine air – not just whatever is on the truck – because a zinc-plated hinge installed near the Bayside corridor will be rusting again within two years. The written price comes before any work starts, and the repair is covered by the 365-Day Done Right Promise. Gate Repair in Everett covers common fixes, pricing, and what to expect on a service call.
Gate Installation in Everett
A new gate in Everett should be chosen for the climate, not just for how it looks on install day. We talk through material selection early – powder-coated aluminum and marine-grade hardware near the water, rot-resistant framing for post-WWII homes with original wooden fence lines, and proper post depth for Everett’s wet ground. Every install includes a written price before we start, shoe covers and drop cloths if we work inside, and a cleanup photo before we leave. Gate Installation in Everett walks through material options, timelines, and what a full install includes.
Electric Gate Repair in Everett
Electric gate operators in Everett fail faster than they should because salt air, constant moisture, and seasonal temperature swings work on circuit boards, wiring, and motor housings all year. We service operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we’re factory-trained on all of them. Most electric gate repairs in Everett are diagnosed and quoted on the first visit, with the written price agreed before we open the operator. Electric Gate Repair in Everett explains the common failure points and what diagnostics cost.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Everett
Families around Everett own a mix of operators and hardware. The brands we see most often are Viking, Linear, Ghost Controls, and DoorKing, and our technicians carry common parts for these locally so repairs don’t stall waiting on a shipment. You can see the full list on our brands page.
Pricing for Gate Company in Everett, WA
| Service | Typical range in Everett |
|---|---|
| Standard gate-latch replacement | $165 – $285 |
| Gate hinge replacement (pair) | $140 – $240 |
| Wooden gate post replacement | $180 – $320 |
| Gate re-hang and re-alignment | $120 – $220 |
| Yard gate wheel installation | $95 – $180 |
| Gate sag repair | $130 – $230 |
| Automatic gate opener diagnostics | $85 – $185 |
| Gate control board replacement | $240 – $440 |
| Gate opener arm replacement | $210 – $390 |
| Electric gate sensor replacement | $145 – $265 |
| Safety photo-eye replacement | $150 – $270 |
| Annual gate lubrication and hardware inspection | $120 – $190 |
Two things push prices up in Everett. Proximity to the waterfront often means rusted hardware that has seized and needs cutting or grinding to remove, which adds labor. And older post-WWII homes with original wooden gates frequently need post replacement at the same time as the gate itself – the post is usually gone even if the gate still looks salvageable. Whatever the number is, it goes in writing before we touch anything, and there is no obligation to accept.
Neighborhoods We Serve in Everett
We work throughout Everett, from the waterfront neighborhoods near the Port and Naval Station to the older core districts and the newer subdivisions south and east. Our technicians live and work here, so they know which blocks get the worst salt exposure and which homes are working with original wooden fence lines.
- Bayside
- Riverside
- Silver Lake
- Delta
- Port Gardner
Most Everett jobs get scheduled within a day or two, and the live person answering the phone can often get a technician out the same morning if a gate is stuck open with kids or pets in the yard.
Service Area – Cities Near Everett
Beyond Everett, we cover the neighboring communities in the Snohomish County area. Marysville, WA to the north, Lake Stevens, WA to the east, and Mukilteo, WA plus Snohomish, WA are all within our regular service area. Dispatch is coordinated from our Seattle office, with crews working locally in Everett.
Serving Everett, WA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Everett
Most Everett service calls are scheduled within one to two days. If a gate won’t close and you have pets or kids in the yard, let the person on the phone know – we often send a technician the same morning. A live person answers calls around the clock, seven days a week, at (626) 649-4572.
Most repairs and like-for-like replacements don’t require a city permit in Everett, but several HOAs around Silver Lake and newer south Everett subdivisions have rules about gate height, material, and color. If you’re in an HOA, check your covenants before choosing a gate style. We can usually work with whatever your HOA requires.
It genuinely does. We’ve pulled open gate operators near the Port of Everett and Naval Station that were installed five to seven years prior and found rust on components that were sold as stainless or galvanized. The salt air in those blocks is aggressive enough that standard hardware simply doesn’t hold up, which is why we recommend marine-grade 316 stainless and powder-coated aluminum for waterfront properties.
If your gate needs work in Everett, call (626) 649-4572 for a free estimate. A live person answers, and you’ll get a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Everett Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick