Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Beverly Hills, CA
Beverly Hills is not a typical gate repair market. The city holds one of the highest concentrations of custom wrought-iron estate gates anywhere in the country, many of them built in the 1920s through 1940s for Spanish Colonial and Mediterranean Revival mansions in the Flats. Those gates weigh more than modern catalog units, they sit on steep hillside lots in Trousdale and above, and they increasingly need to talk to whole-home automation systems. That combination changes everything about how a repair call goes. If your gate is sagging, sticking, or refusing to open, call us at (626) 649-4572 and we’ll send a technician who knows what he’s walking up to.
Why Beverly Hills Homes Are Different
Start with the housing stock. The Beverly Hills Flats, south of Sunset Boulevard, are filled with large estates built between the 1920s and 1940s. Many still carry their original wrought-iron gates, which means hinge hardware has been through eighty or ninety years of use, and the posts they hang from have settled unevenly into old concrete. A sag that looks minor to a homeowner is often a sign the post base needs rebuilding, not just a hinge adjustment. We see this constantly in the Flats.
The hillside neighborhoods add a different complication. Trousdale Estates, developed in the 1950s and 1960s on steep lots, stacks driveways at serious grades. A gate operator sized for a flat driveway will burn out on a Trousdale incline because it is fighting gravity every time it holds position. That is not a brand problem. It is a spec problem, and it is one local crews account for automatically.
Santa Ana winds are the other recurring factor. Beverly Hills sits far enough inland that the gusts hit harder here than they do in Santa Monica or Marina del Rey. A heavy unlatched gate slamming against its stop can strip worm-gear teeth inside the operator and bend lighter aluminum frames. After each fall wind season, we replace wind-stop hardware and recalibrate auto-close timers up and down the 90210 and 90212 ZIP codes.
Our Main Beverly Hills Services
Most Beverly Hills calls come down to three things: a broken gate that will not move, a new gate that needs to be built or fitted, and an electric operator that has stopped responding. Each has its own page with deeper detail, linked below.
Gate Repair in Beverly Hills
Older wrought-iron gates in the Flats rarely need replacing. They need hinge rebuilding, welding at stress points, and post realignment. We often repair a gate the owner assumed was finished. On Trousdale slopes, an operator that hums but does not move is frequently burned out from braking against the grade. Gate Repair in Beverly Hills covers weld work, post work, latch replacement, and the specific failure patterns we see after Santa Ana season.
Gate Installation in Beverly Hills
New gate work in Beverly Hills means matching the architecture, not bolting in a prefabricated unit. Whether you want a modern steel gate for a Trousdale drive or a period-styled iron replacement in the Flats, the job centers on post depth, hinge sizing, and an operator rated for the actual weight and grade. Gate Installation in Beverly Hills walks through what a full installation includes and how we price it.
Electric Gate Repair in Beverly Hills
Many Beverly Hills estates run automation through Control4 or Crestron, and the failure shows up as a gate that will not respond to the keypad, the app, or the intercom. The fix is usually in the low-voltage wiring, the safety loop, or the operator board. Electric Gate Repair in Beverly Hills explains how we diagnose those systems without guessing, including the incline-specific force settings that matter on hillside drives.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Beverly Hills
We are factory-trained on the equipment families actually own here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Beverly Hills crews keep boards, remotes, and safety eyes for the common models stocked on the truck so most calls finish in one visit. See our brands for the full list.
Pricing for Gate Company in Beverly Hills, CA
| Service | Typical range in Beverly Hills |
|---|---|
| Gate-latch replacement | $140 - $320 |
| Hinge repair or rebuild | $220 - $520 |
| Wood gate repair | $180 - $450 |
| Wrought-iron welding | $160 - $380 |
| Opener diagnostic | $90 - $180 |
| Operator motor replacement | $450 - $1,100 |
| Circuit board or receiver replacement | $230 - $520 |
| Keypad or safety-eye repair | $150 - $350 |
| Full installation, single-swing gate | $2,800 - $6,500 |
| Heavy custom-iron gate installation | $4,000 - $9,000+ |
Two things push Beverly Hills pricing above the regional average: gate weight and driveway slope. A heavy iron gate from the 1930s needs a higher-torque operator than a lighter modern unit, and a Trousdale grade can require an incline-rated motor or a dual-operator setup. Before any work begins, you will have a written price agreed in advance. No surprises after the fact.
Neighborhoods We Serve in Beverly Hills
Our Beverly Hills crews cover the entire city. Most calls in the Flats and Trousdale Estates can be scheduled with a same-week visit, and emergency gate-down situations are answered around the clock. Typical neighborhoods we work in include:
- The Beverly Hills Flats
- Trousdale Estates
- Beverly Hills Gateway
- Beverly Park
- Beverlywood-adjacent streets
Service Area – Cities Near Beverly Hills
Our Beverly Hills crews also take calls in neighboring cities. If your home sits near the city line, we can usually route the same technician who knows the local gate stock to West Hollywood, CA, Culver City, CA, Santa Monica, CA, or Marina del Rey, CA. Call and we will tell you straight whether we can get to you today.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Beverly Hills
Most non-emergency calls in Beverly Hills are scheduled within one to three business days. A gate stuck open or a driveway blocked by a failed operator counts as an emergency, and we answer live around the clock at (626) 649-4572 to get someone out fast.
Beverly Hills reviews changes to street-facing gates through its permit process, and many estates have HOA design rules. We will flag what needs approval before quoting, so the written price covers the work, not the paperwork surprises.
Yes. Every visit includes shoe covers, drop cloths over floors, and a cleanup photo taken before the technician leaves. If you have pets or a sleeping child, tell the scheduler and we will work quietly and around them.
For a free estimate or an emergency gate repair in Beverly Hills, call Latch & Post Gate Repair at (626) 649-4572. A live person answers, any hour.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco