Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Des Moines, WA
Gate work in Des Moines is not the same as gate work ten miles inland. The marine air off Puget Sound eats standard zinc-plated hinges and latches within two or three seasons, and the hillside lots above the water mean gates shift, bind, and sag in ways flat-yard gates never do. We’re a Cedarwell-family gate specialist, and we focus on the hardware that actually survives here: marine-grade stainless, hot-dipped galvanized components, and opener systems rated for constant coastal moisture. Call (626) 649-4572 any time, day or night, and a live person will answer.
Why Des Moines Homes Are Different
Most of Des Moines was built between the 1950s and the 1980s: post-war ranches and split-levels on steep lots that climb away from the water. Those original gates, usually wood or chain-link with zinc-plated hardware, are now 50 to 70 years old. Near the western bluffs and the Des Moines Marina, the salt-laden air takes a visible toll. Hinges rust through. Strike plates corrode until the latch no longer catches. On Marine View Drive, where wind carries salt spray straight up the slope, even powder-coated frames start bubbling within a few winters.
The terrain matters too. A gate hung on a 20-degree slope works against gravity every time it opens. That strain on hinges, posts, and automatic openers is what turns a small adjustment into a recurring failure if the tech treats it like a flat-lot job. We plan every Des Moines repair around the slope, the rain exposure, and the salt, which is why the written price you get before work starts reflects the hardware that will actually last here, not the cheapest option that will fail again by 2027.
Our Main Des Moines Services
The two calls we get most from Des Moines homeowners are sagging or corroded gates that no longer latch, and electric openers that have seized up after a wet winter. Each service has its own Des Moines page below with full pricing and scheduling details.
Gate Repair in Des Moines
A gate that drags on the driveway or won’t close quietly is usually a hinge, post, or latch problem made worse by salt air and slope. We replace corroded hardware with marine-grade stainless or hot-dipped galvanized components as the baseline, not an upgrade. We also set drop cloths and shoe covers before stepping onto your floors, and you’ll see the written price before we touch anything. Gate Repair in Des Moines covers hinges, posts, latches, and sag repair.
Gate Installation in Des Moines
New gates on Des Moines hillside lots need posts set for the slope and hardware specified for salt exposure. We measure the grade, account for wet-soil drainage, and quote a full installed price in writing before ordering anything. You choose the style and material; we handle the footing depth, hinge spec, and alignment so the gate swings true for years. Gate Installation in Des Moines walks through the process from measure to final cleanup photo.
Electric Gate Repair in Des Moines
Automatic openers near the Sound fail most often from moisture intrusion and corrosion on the control board or limit switches, especially on shaded, north-facing lots where condensation never fully dries. We’re factory-trained on FAAC, BFT, Linear, and Viking equipment, and we stock common boards and sensors locally so most Des Moines repairs are completed in one visit. Electric Gate Repair in Des Moines explains diagnostics, repair, and replacement options.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Des Moines
Our technicians are factory-trained on FAAC, BFT, Linear, and Viking systems, and we keep common boards, sensors, and remotes stocked for quick turnaround. See our brands for the full list, including LiftMaster and Ghost Controls.
Pricing for Gate Company in Des Moines, WA
| Service | Typical range in Des Moines |
|---|---|
| Gate latch replacement | $180 - $340 |
| Gate hinge replacement (pair) | $240 - $420 |
| Gate post reset or replacement | $380 - $750 |
| Wood gate sag repair | $220 - $400 |
| Chain-link gate re-hang | $260 - $480 |
| Automatic opener diagnostic | $120 - $200 |
| Control board replacement | $350 - $650 |
| Sensor or photo-eye replacement | $180 - $300 |
| Full gate installation (standard) | $1,800 - $4,200 |
Prices in Des Moines run toward the upper end when the job involves a steep slope, a corroded post that needs excavation, or marine-grade hardware replacement. Whatever the number, you’ll see it in writing before any work begins, and the 365-Day Done Right Promise covers every repair and installation.
Neighborhoods We Serve in Des Moines
We cover the full city, from the bluff corridor along Marine View Drive down to the Marina District and the inland neighborhoods east of Pacific Highway South. Most calls get same-day or next-day scheduling.
- Marina District
- North Hill
- Zenic
- Redondo
- Woodmont
Service Area – Cities Near Des Moines
Beyond our Des Moines gate work, we also serve Seattle, WA, Tacoma, WA, Vancouver, WA, and Spokane, WA. Scheduling is coordinated from the brand’s Seattle office, with local crews dispatched to each area.
Serving Des Moines, WA - Our Local Coverage Area
We’re based in the Des Moines area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Des Moines
Most gate repair calls in Des Moines are scheduled same-day or next-day. Electric opener diagnostics may take an extra day if a specific board needs to be pulled from the Seattle parts stock. Call (626) 649-4572 and a live person will confirm the window before you hang up.
Most gate repairs do not require a permit. New installations with concrete footings or automatic opener electrical runs may need city review depending on the scope. We’ll tell you during the measure if your project needs any paperwork, and that conversation is part of the free estimate.
Yes. Many Des Moines hillside communities have specific rules about gate height, material, and color. We can work from your HOA’s written guidelines, and we’ll note any conflicts on the written quote before you approve the work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Des Moines Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco