Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Ghost Controls Gate Repair in Santa Ana, CA | Latch & Post Gate Repair
We’re an independent Ghost Controls repair company offering Ghost Controls service in Irvine and Santa Ana, and the short answer is yes, we fix the brand’s solar and low-voltage swing gate operators every week across this city. What makes our Ghost Controls work different here is that we know exactly how Santa Ana’s salt marine air, dry-wind shutoffs, and decades-old wrought iron gates interact with this equipment. Call (626) 649-4572 and you’ll get a live person, a written price, and a technician who knows Ghost Controls failure points cold.
Why Santa Ana Residents Choose Us for Ghost Controls Service
Ghost Controls operators are popular on Santa Ana’s older wrought iron and chain-link driveway gates for a simple reason: they’re DIY-friendly and solar-ready. That also means we see them installed incorrectly, under-maintained, and fighting against conditions this city throws at them harder than almost anywhere in Orange County. Our technicians have handled Gate Repair in Santa Ana for Ghost Controls control board corrosion, gearmotor wear, and wind-forced arm damage hundreds of times across local homes.
Cody Beckman, our owner, studied welding and metal fabrication at Los Angeles Trade-Technical College, and he’s been working gates for nearly two decades. He grew up in a house where the back gate always sagged, so he knows what a hinge drifting out of plumb does to an operator over time. We’re part of the Cedarwell family of gate specialists and we carry Ghost Controls OEM boards, gearmotors, and arms for fast local turnaround. We’re also independent: no affiliation with, or authorization from, Ghost Controls.
Common Ghost Controls Gate Repair Problems We Solve in Santa Ana
- Control board and terminal corrosion from marine air. Santa Ana sits close enough to the Pacific that salt-laden moisture works into unsealed board compartments on westside gates. We open the housing, clean or replace the board with OEM parts, and seal the enclosure so the next marine-layer season doesn’t repeat the failure.
- Battery and solar charge-controller failure after foggy stretches. Weeks of overcast or marine-layer fog starve the solar panel, and the battery bank drops below the threshold the Ghost Controls board needs to fire the motor. We add fresh batteries, check the charge controller, and where it makes sense, wire in an AC fallback or a larger panel.
- Snapped arm brackets and stripped drive gears after Santa Ana wind events. When a gust over 50 mph catches an unlatched gate, the operator arm gets forced past its travel limit. We’ve replaced enough bent brackets and stripped gears east of the 5 and across the westside to stock those parts locally.
- Fault codes from worn hinge and post mounts on rental-property gates. Santa Ana has a huge share of rental housing, and gates on those properties see constant use with slow repairs. A sagging post overloads the Ghost Controls opener, trips fault codes, and chews through drive gears. We fix the hinge and post alignment first, then the operator.
- Gates stuck closed after SCE precautionary shutoffs. During dry-wind season, Southern California Edison sometimes cuts power in Santa Ana’s denser westside neighborhoods. AC-powered Ghost Controls gates go dead, and residents get locked out of their own driveways. We prioritize battery-backup and solar retrofits for exactly this reason.
Ghost Controls Service in Santa Ana: What Local Conditions Mean for Your Equipment
Here’s the thing about Santa Ana that no other city in Orange County shares to the same degree: the winds that bear this city’s name blow straight through the Cajon and Santa Ana Canyon passes and hit your gate hard. During those events, SCE precautionary power shutoffs in westside neighborhoods near Edinger Avenue leave AC-powered Ghost Controls gates stuck closed, often with residents locked out and a landlord on the phone after hours. It’s a failure pattern our technicians expect every dry-wind season.
Add to that the salt-laden marine air the rest of the year, and you get a specific combination: a Ghost Controls control board corroding quietly behind its terminal strip while the solar panel sits under fog for three weeks. The gate fails on a Tuesday morning, not during the wind event at all. For Ghost Controls owners in Santa Ana, the practical takeaway is that battery-backup and sealed enclosures aren’t optional extras here. They’re the difference between a gate that opens and one that doesn’t.
Ghost Controls Models & Products We Service in Santa Ana
We work on the full Ghost Controls lineup you’re likely to find on Santa Ana gates: the Heavy-Duty Solar Automatic Gate Opener for single swing applications, the Dual Swing Automatic Gate Opener Kit in both solar and AC configurations, the TSS1 and TDS series solar operator kits, and the AXS accessory line including keypads, remote transmitters, solar panels, and battery harnesses.
Our parts approach is straight: Ghost Controls OEM control boards, gearmotors, and arms when a unit is worth saving, and quality aftermarket batteries, solar panels, and keypads where they meet or beat OEM spec at a lower cost. On older, rusted-out operators we’ll tell you honestly when our Gate Installation in Santa Ana with a new Ghost Controls kit or a heavier-duty brand makes more sense than another repair. We stock the common Ghost Controls failure parts locally so Santa Ana calls don’t wait on ground shipping.
Ghost Controls Service Pricing in Santa Ana
Most Ghost Controls repairs in Santa Ana run between $180 and $340 when we’re replacing a control board, arm bracket, or battery bank, and a full dual-swing operator install typically lands in the $900 to $1,450 range depending on gate width and power access. A $140 board swap beats a $900 full-unit replacement, and that’s the kind of call we make honestly: repair it when it’s worth saving, replace it when it’s not.
Every estimate is written and delivered before any work begins, with no pressure to accept. You’ll know the exact number, the parts we’re using, and why. Call (626) 649-4572 for a free estimate, and Cody or one of our technicians will walk you through what you’re looking at.
Serving Santa Ana, CA - Our Local Coverage Area
We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Santa Ana
Can a Ghost Controls solar gate opener survive Santa Ana winds?
Yes, if the gate itself is properly latched and the operator arm isn’t already stressed from a sagging hinge or post. The wind events we see in Santa Ana regularly gust over 50 mph, and an unlatched gate becomes a lever against the operator arm. We reinforce the arm bracket and verify the gate’s mechanical alignment before calling a wind-prone install done. If your gate has already taken wind damage, call (626) 649-4572 and we’ll get eyes on it.
My Ghost Controls gate won’t open after an SCE power shutoff - what should I do?
If your Ghost Controls unit is AC-powered and the gate won’t budge after a shutoff, the opener has no power and the manual release is your only way to move the gate. Don’t force the arm by hand, that can bend the linkage. We can add a battery-backup module or convert the unit to solar so the next SCE event doesn’t strand you outside your property. Call (626) 649-4572 and we’ll quote both options.
Why does my Ghost Controls control board keep corroding?
In Santa Ana, the answer is usually the salt-laden marine air working into an unsealed board compartment. The terminals oxidize, resistance builds, and the board eventually stops reading the remote or the limit switches. We replace the board with a Ghost Controls OEM part when needed and seal the enclosure with a gasket and dielectric grease on the terminals. It’s the difference between a one-time repair and a board every eighteen months.
Is it worth repairing an old Ghost Controls opener or should I replace it?
That depends on the cost of the repair against the price of a new kit, and we’ll give you the honest math. A $140 control board swap on a five-year-old unit makes sense. A rusted-out gearmotor, cracked housing, and dead battery bank on a ten-year-old operator might add up to more than a new Ghost Controls solar kit or a heavier-duty brand. We’ll write it up both ways and you decide. Estimates are free, call (626) 649-4572.
Do you service Ghost Controls gates on rental properties in Santa Ana?
Yes, and we do a lot of them. Rental gates on Santa Ana’s denser streets see constant use and slower maintenance, which means worn hinges and stripped drive gears show up more often. We work directly with landlords and property managers, we write up the price before touching anything, and we document the cleanup. Call (626) 649-4572 to schedule.
Service Areas Near Santa Ana
Our technicians cover Santa Ana and the surrounding Orange County area. We also provide Ghost Controls service in Long Beach for coastal properties dealing with the same salt air, and Ghost Controls service in Newark for owners of this brand. If you’re in Santa Ana or a neighboring city, call and ask; we’ll tell you straight if we can get to you this week. For more on our work across the region, see our Santa Ana service area page or our broader Ghost Controls sales & service coverage.
Book Your Ghost Controls Service in Santa Ana Today
If your Ghost Controls gate is dead, faulted, or making a sound it shouldn’t, call (626) 649-4572. A live person answers around the clock, and we’ll set a time that works for you. The gate should open quietly and close all the way. That’s really the whole job, and we’ll get yours there.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Santa Ana since 2009.





Before
After
Before
After
Before
After