Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Jacksonville, CA | Latch & Post Gate Repair
If your Ghost Controls gate opener is stalling mid-travel, refusing to respond to the remote, or opening on its own during storm bands, we can help. Latch & Post Gate Repair provides independent Ghost Controls service across Jacksonville, from Deerwood to Bartram Park to San Marco. What makes our work here different is simple: we treat Jacksonville’s salt air and flood patterns as the root cause behind most Ghost Controls failures, not an afterthought. Call (626) 649-4572 for a written, no-pressure estimate before any work begins.
We are an independent gate repair company that has worked on Ghost Controls solar and low-voltage operators since they became common on Jacksonville’s aluminum swing and slide gates. Our techs keep up with Ghost Controls control-board revisions and stock the specific remote, battery, and arm parts that fail in Florida’s humidity, without any manufacturer authorization or warranty claim. We’re the Cedarwell-family gate specialist serving Jacksonville, and we stay focused on one trade: gate repair, gate installation, and electric gate repair.
Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on. And every visit includes a written price before work starts, shoe covers and drop cloths inside your home, and a cleanup photo before we leave.
Why Jacksonville Residents Choose Us for Ghost Controls Service
Ghost Controls operators have their own quirks. The solar kits, the TSS1 and TSS1XP heavy-duty tube gate openers, the slide gate packages, the keypads and remotes paired with low-voltage boards. Each one fails differently in this climate. We know which control-board revision tends to corrode first, which battery tray fills with water, and which arm pivot seizes when salt gets into the hinge.
Cody Beckman, our owner, grew up in Los Angeles and studied welding and metal fabrication at LA Trade-Technical College. For the better part of two decades he’s worked on gates across the Westside and into the Valley, and he’s become the person neighbors call when a LiftMaster operator quits mid-cycle or a wrought-iron post has drifted out of plumb. He’s trained our Jacksonville techs to look at the whole gate, not just the operator, because a Ghost Controls board rarely fails in isolation here. Usually the board failed because water got to it, or the arm seized and overloaded it, or a wind event knocked the gate out of alignment and the motor has been fighting it ever since.
We’re background-checked, uniformed, and we work to the Cedarwell C.A.R.E. values on every call. Clean up like it is our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work. And every repair is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print. We also offer Ghost Controls sales & service for homeowners who want a new unit installed properly the first time.
Common Ghost Controls Gate Repair Problems We Solve in Jacksonville
- Control boards corroding from summer humidity. Jacksonville sustains 90%+ relative humidity through the summer, and Ghost Controls boards sit inside plastic housings that trap moisture. We see erratic open/close cycles, remotes that work intermittently, and boards that simply stop responding. We open the housing, assess the corrosion, and either repair the board or replace it with an OEM unit, then address the moisture entry point so it doesn’t happen again.
- Solar panels and batteries undercharging during storm season. Hurricane-season rain bands and extended cloud cover starve Ghost Controls solar kits of charge. Gates stall mid-travel, lose position memory, or won’t hold closed. We test the panel output and battery health, and where the property allows, we recommend panel repositioning or a low-voltage backup hookup for Jacksonville’s weather patterns.
- Arm and linkage hardware rusting near the Intracoastal and Ortega corridors. Communities near the Intracoastal or Ortega and Mandarin riverfronts get dual salt-air exposure, Atlantic on one side and river on the other. Ghost Controls arm pivots, clevis pins, and gate hinges rust and seize within 3 to 5 years here, what would take a decade in Orlando. We replace with marine-grade hardware and free up the travel so the operator isn’t fighting its own rust.
- Underground loop detectors and low-mounted control boxes flooding in San Marco and the Beaches. Low-lying neighborhoods flood repeatedly, and ground-level Ghost Controls control boxes get submerged. Wiring shorts, terminal blocks corrode, and the board bricks. We dry, repair, and then relocate the control box to an elevated pedestal above the flood line.
- Wind-loaded swing gates knocked off alignment by tropical storm bands. Jacksonville’s frequent tropical storm bands push hard against swing gates, bending hinges and forcing gates out of plumb. The Ghost Controls operator then strains against a misaligned gate and burns out the motor or strips the arm. We realign the gate, replace bent hinges, and reset the travel limits so the operator works with the gate instead of against it.
Ghost Controls Service in Jacksonville: What Local Conditions Mean for Your Equipment
Here’s the thing about Jacksonville that doesn’t show up in a generic service manual. Because the city’s gate operators in San Marco, Ortega, and parts of the Beaches flood repeatedly, Ghost Controls control boxes here are often mounted at ground level and get submerged, a condition that rarely comes up in our inland service experience. The fix isn’t another board replacement. It’s elevating or pedestal-mounting the control box on these low-lying properties.
In San Marco, our crew was called to a Ghost Controls dual-arm swing gate on a brick-column driveway where the operator had quit after a week of heavy rain and the gate was stuck half-open. We found the control board and battery tray submerged in the pedestal, with corrosion on the terminal block and a seized lower hinge pin. After drying and replacing the board, we relocated the control box to a pedestal above the flood line and installed a marine-grade hinge set. The gate has cycled cleanly through the rest of hurricane season and the owner added a keypad and remote re-sync on the same visit.
Jacksonville’s dual salt-air exposure, Atlantic beaches on the east and the St. Johns River and Intracoastal cutting through the core, corrodes iron and steel gate hardware faster than nearly any inland Florida market. For Ghost Controls owners, that means the operator’s aluminum housing may look fine while the steel internals are rusting quietly. The gate should open quietly and close all the way. That’s really the whole job.
Ghost Controls Models & Products We Service in Jacksonville
We work on Ghost Controls solar-powered swing gate opener kits, single and dual arm, plus the TSS1 and TSS1XP heavy-duty automatic gate openers built for tube gates. We also service Ghost Controls slide gate opener kits on aluminum slide gates, and we repair and program Ghost Controls keypads and remotes paired with their low-voltage operators.
Our parts approach is straightforward. We use OEM Ghost Controls control boards, arms, batteries, and remotes where they are still available, and quality marine-grade aftermarket hinges, fasteners, and pedestals where OEM doesn’t address salt corrosion. We repair Ghost Controls operators when the board, battery, or arm is the failure point. We recommend replacing the whole operator when the housing is rusted through or the gate has been repeatedly knocked out of alignment. The price is quoted and agreed before any work starts, every single visit.
Ghost Controls Service Pricing in Jacksonville
Ghost Controls gate repairs in Jacksonville typically run $180 to $340 for a service call plus parts, depending on what failed. A control board replacement usually lands between $250 and $450 with labor. A battery and solar-panel tune-up runs $120 to $200. Full operator replacement, including a new Ghost Controls unit and installation, typically ranges from $850 to $1,400 depending on gate size and whether it’s swing or slide. Our free estimate gives you the exact number in writing before any work begins, no pressure to accept. Call (626) 649-4572 and we’ll come out, diagnose the problem, and hand you a written price.
Serving Jacksonville, FL - Our Local Coverage Area
We’re based in the Jacksonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Jacksonville
It’s almost always water. Jacksonville’s heavy rain events, around 52 inches a year, get into ground-level control boxes and corrode the memory circuit or terminal block. We dry the board, repair or replace it, and then relocate the control box above the flood line so it stops happening. Call (626) 649-4572 and we’ll diagnose it in person.
Usually we can repair it. The failure is typically the battery, the board, or the arm. But if the housing is rusted through or the gate has been knocked out of alignment repeatedly, we’ll tell you honestly that replacement is the better value. Either way, you’ll see the written price before we start. Call (626) 649-4572 for a free estimate.
That’s the wind pushing against the gate and the operator’s position sensor getting confused. It can also be water shorting the control board. We check the alignment, the hinges, and the board, then secure the gate so it holds position through the next storm band. We’re one phone call away at (626) 649-4572.
We test the remote and keypad with a signal tester first. If they’re transmitting, the issue is the receiver on the operator board. If they’re not, the remote or keypad itself is the failure. We carry both parts and can usually resolve it in one visit. Call (626) 649-4572 and we’ll sort it out.
Yes, but the problems differ. Deerwood and Bartram Park gates are often 2000s-to-2010s aluminum swing or slide gates with underground loop detectors prone to flooding damage. Beachside gates face more salt air and wind. We adjust our approach based on what each property actually faces. Call (626) 649-4572 and we’ll come take a look.
Service Areas Near Jacksonville
We serve Jacksonville and the surrounding communities, including Jacksonville service area neighborhoods like Ortega, San Marco, Deerwood, and Bartram Park. If you’ve got family or property elsewhere, we also offer Ghost Controls service in Austin and Ghost Controls service in San Jose through our Cedarwell-family locations in those cities.
Book Your Ghost Controls Service in Jacksonville Today
If your Ghost Controls operator is acting up, call (626) 649-4572. A live person answers around the clock, nights, weekends, and holidays included. We’ll schedule a visit, diagnose the issue, and put a written price in your hand before any work begins. Free estimates, every time.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Jacksonville since 2009.