Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Los Angeles?
Gate parts and welding in Los Angeles typically run $180 to $650 for most repair work, with simple hardware swaps like hinges, latches, and rollers landing near the low end and on-site welding or heavy-frame fabrication pushing toward the higher end. A full custom gate build or a major post-and-weld reconstruction can reach $1,800 to $4,500 or more depending on size, material, and finish. We give you the exact number in writing before we touch anything, so there’s no guessing once work starts.
Latch & Post Gate Repair has worked on Los Angeles gates since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Every gate comes down to two parts – the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why families in Los Feliz, Sherman Oaks, and Boyle Heights call us back.
Key Takeaways
- Most Los Angeles gate parts and welding jobs fall between $180 and $650.
- Mobile welding and custom fabrication are the two biggest cost drivers.
- Every visit includes a written price, shoe covers, drop cloths, and a cleanup photo at no extra charge.
- All work is covered by our 365-Day Done Right Promise.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what Los Angeles homeowners are paying this year for the parts and welding work we handle most often. Ranges reflect standard residential gates on a typical lot.
| Service | Typical Cost Range |
|---|---|
| Latch replacement (standard) | $180 – $320 |
| Hinge repair or replacement (per gate) | $200 – $400 |
| Roller / track hardware replacement | $220 – $450 |
| Weld a cracked or broken frame | $250 – $550 |
| Post repair or re-anchoring | $300 – $700 |
| Custom gate fabrication (small to mid-size) | $1,200 – $2,800 |
| Full custom gate build (large, welded) | $1,800 – $4,500+ |
| Electric gate hardware (motor, sensor, wiring) | $400 – $1,600 |
What pushes a job toward the top of a range? Heavy steel gates, rusted-through posts, and gates that need to come off their hinges for the weld to be done right. What keeps a job at the low end? Standard hardware swaps where the frame is sound and only one part gave out. If you’re not sure which category you’re in, our Gate Parts & Welding in Los Angeles page walks through the common failure points, or you can call us and describe what you’re seeing.
What Affects Gate Parts & Welding Pricing in Los Angeles
- Gate material. Ornamental iron and steel take longer to weld and finish than aluminum or wood. A wrought-iron weld typically adds $60 to $120 to the labor portion compared to aluminum.
- Coastal vs. inland corrosion. Homes near Santa Monica and Venice deal with salt air that eats through hardware faster. We often see hinges fail here in 3 to 5 years, versus 7 to 10 inland – which means more frequent replacements.
- Hardware brand. If your gate runs on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule parts, we stock or can source the right replacement. Off-brand hardware sometimes costs less upfront but drives up labor when it doesn’t fit cleanly.
- Access and clearance. A gate tucked behind a steep driveway in the Hollywood Hills takes more setup than one on a flat lot in Culver City. Tight spaces, low branches, and parked cars all add time.
- Welding location. Simple welds can sometimes be done in our shop. On-site welding costs more because of travel and setup, but it avoids removing the gate entirely.
- Age of the gate. Gates past 15 years old often need more than the one part that failed. We’ll tell you honestly if a repair will hold or if you’re better off replacing.
How to Save on Gate Parts & Welding
The single biggest money-saver is catching a problem before it spreads. A $200 hinge replacement today can turn into a $700 post repair if the gate sags long enough to twist the frame. Here’s what actually helps in Los Angeles:
- Fix the latch or hinge the week you notice it sticking. Small hardware repairs stay cheap. Frame damage doesn’t.
- Rinse coastal hardware every few months. If you live within a few miles of the ocean, a quick hose-down removes salt buildup that accelerates rust.
- Ask about pet-safe lubricants. We choose lubricants that are safe around dogs and kids where there’s a choice, and it’s a no-cost preference on most visits.
- Bundle small repairs. If two or three parts are worn, having us handle them in one visit is cheaper than three separate trips.
- Get a written price before you agree. We deliver one every time, free, with no pressure to accept. Call (626) 649-4572 and we’ll walk your gate through what it needs.
If you’re weighing repair against replacement, our home page covers the full range of gate services we offer across Los Angeles. Families in neighborhoods like Encino, Silver Lake, and Hancock Park often find that a targeted weld and hardware refresh adds 8 to 12 more years to a gate that a salesperson might have told them to replace.
Our Process: What Happens When You Call
We keep this simple and predictable, because that’s what trust looks like on a job site.
- You call and a live person answers. No voicemail, no callback queue – 24 hours a day, 7 days a week.
- We ask what the gate is doing. Sticking, sagging, not latching, making noise. That usually tells us what’s wrong before we arrive.
- We inspect and write up a price. You see the exact number before any work begins, every single visit.
- We lay drop cloths and put on shoe covers if any part of the job touches your home interior. Your floors stay clean.
- We do the work with quiet tools where we can, and we’ll schedule around nap time if quiet matters.
- We clean up and send you a photo of the finished area before the technician leaves.
That routine is what the Cedarwell C.A.R.E. values look like in practice – clean up like it’s our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work. Every repair and installation is backed by our 365-Day Done Right Promise: if it isn’t right, we make it right, no argument and no fine print.
FAQs – Gate Parts & Welding Cost
How much does a gate latch replacement cost in Los Angeles?
A standard gate latch replacement in Los Angeles runs $180 to $320, including the part and labor. Decorative or heavy-duty latches on iron gates sit at the higher end. Call (626) 649-4572 for an exact quote – estimates are free.
Is it cheaper to repair or replace a welded gate?
Repair is almost always cheaper when the frame is sound – typically $250 to $550 for a weld versus $1,800 to $4,500+ for a new custom build. If more than half the frame is compromised, replacement makes more sense. We’ll tell you which one you’re looking at, in writing, before any work starts.
Can you come today for a broken gate?
Often yes. A live person answers our line 24/7, so call (626) 649-4572 and we’ll tell you the soonest slot. Same-day service is common for hardware failures and urgent latches.
Do you weld on-site, or does the gate need to go to a shop?
Both options exist. On-site welding runs $250 to $550 for most repairs and saves you the hassle of removal, though it carries a setup fee. Simple welds on removable gates are sometimes cheaper in-shop. We’ll recommend whichever makes sense for your gate and your schedule.
Does the cleanup and shoe-cover routine cost extra?
No. Shoe covers, drop cloths, and a cleanup photo before we leave are included on every visit at no extra charge – they’re part of how we work, not an add-on. Call (626) 649-4572 to schedule.
Get a Free Written Price on Your Gate
If you’ve got a latch that won’t catch, a post that’s leaning, or a weld that’s starting to crack, the fastest way to a real number is a quick call. We’ll ask a few questions, tell you what we think is going on, and give you a written price before anything happens. No pressure to accept, no surprise charges, and a live person on the line whenever you call. Reach us at (626) 649-4572 for a free estimate.
Pricing reflects the Los Angeles market as of 2026. Latch & Post Gate Repair offers free estimates – call (626) 649-4572.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Los Angeles since 2009.
What Our Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide