Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
How Much Does Gate Motor & Opener Cost in Los Angeles?
Gate motor and opener work in Los Angeles usually runs $450 to $1,900 for a residential swing or sliding gate, with most repairs landing between $280 and $650 and full opener replacements between $1,100 and $2,600 installed. A new gate opener motor on its own typically costs $400 to $1,200 in parts, and the labor to mount, wire, and dial it in adds another $350 to $900 depending on the gate. If your gate is stuck open right now, the fastest answer is a written price before we start, and you’ll get one the same day you call.
We’re Latch & Post Gate Repair, part of the Cedarwell family of independently owned and operated gate specialists working in Los Angeles since 2009. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and pricing for it should never be a mystery.
Key Takeaways
- Most LA gate opener repairs cost $280-$650; full motor replacements run $1,100-$2,600 installed.
- You get a written price before any work starts, every visit, no pressure to accept.
- Live person answers the phone 24/7, including nights, weekends, and holidays.
- We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Gate Motor & Opener Cost Breakdown (2026)
These are real Los Angeles market figures for 2026, not national averages. Coastal fog in Santa Monica and salt air near the Marina chew through control boards faster than the dry heat in Woodland Hills does, and that shows up in the numbers.
| Item | Typical LA Price Range |
|---|---|
| Service call & diagnosis (credited toward repair) | $75-$150 |
| Control board replacement | $320-$700 |
| Motor replacement (existing arm or slide unit) | $400-$1,200 |
| New swing gate opener, single leaf, installed | $1,100-$2,100 |
| New sliding gate opener, installed | $1,300-$2,600 |
| Remote programming or replacement | $85-$180 |
| Safety sensor / photo-eye pair, installed | $180-$420 |
| Battery backup install | $250-$550 |
| Keypad or intercom entry | $220-$600 |
| Full rewiring (long runs, conduit, trenching) | $450-$1,800 |
What pushes a job toward the top of a range? Gate weight and width are the biggest drivers. A 16-foot slide gate needs a heavier-duty operator than a 12-foot swing gate, and that’s a real jump in both parts and labor. Second is condition: a motor that failed cleanly is a swap, but a motor that took the gate arm, the track, and the control board with it becomes a multi-part job. Third is access. A driveway gate tucked behind a narrow Hillside or Echo Park approach takes longer to get equipment to than one with twenty feet of open apron. Anything unusual, like a solar setup or a loop detector, adds cost. You can read more about what each of those systems actually does on our Gate Motor & Opener in Los Angeles page, or start on our home page if you’re still figuring out what’s wrong.
What Affects Gate Motor & Opener Pricing in Los Angeles
- Brand of operator. LiftMaster and Linear parts are widely stocked, so repairs tend to sit at the lower end. FAAC, BFT, and DoorKing units often need specific boards or arms that ship in, which adds a day or two and sometimes a bit more cost. We work on all of them and carry the factory training for each.
- Gate weight and material. A wrought-iron gate in Hancock Park weighs far more than an aluminum one the same size. Heavier gates need larger operators and stronger mounting, and that’s the single biggest swing in a quote.
- Salt air and coastal humidity. If you’re within a few miles of the water, in Venice, Playa del Rey, or San Pedro, corrosion on the control board and limit switches is common. We choose pet-safe lubricants where there’s a choice, and we’ll tell you honestly whether a coastal gate is better off with a sealed enclosure.
- Electrical access at the gate. If there’s no power run to the gate post, that’s a trench and conduit job before the opener even comes out of the box. That alone can add $450 to $1,800.
- Age of the existing system. Operators over about twelve years old often hit a point where the board, the motor, and the sensors are all near the end together. We’ll show you the math on repair versus replace rather than guess.
- Permit and inspection requirements. Some Los Angeles properties, especially in hillside zones or where a gate crosses a driveway approach, require a permit for new electrical work. If yours does, we’ll tell you before we start.
How to Save on Gate Motor & Opener
The cheapest repair is the one you catch early. A gate that’s starting to hesitate, reverse halfway, or click without moving is usually a $180 to $400 fix. The same gate left for six months often becomes a board and motor replacement at triple the cost. That’s not a sales pitch; it’s just how these systems fail.
A few things that genuinely help:
- Get the diagnosis in writing. Ask what failed and why. If a technician can’t tell you the specific part and the reason it failed, you’re guessing.
- Ask whether the service call credits toward the repair. Ours does, and that’s $75 to $150 back in your pocket.
- Keep the gate track and rollers clear. Debris in the track forces the motor to work harder, and that’s what kills operators early, especially in the Santa Ana wind months when grit shows up everywhere.
- Battery backup pays for itself in a blackout. LA outages are usually short, but a gate stuck closed with a car inside is a bad afternoon. It’s a $250 to $550 install that most people only think about after the fact.
- Get a written price before work starts. That’s a guarantee with us, not a favor. Call (626) 649-4572 for a free estimate and you’ll have the number in hand before anyone touches the gate.
One safety note worth stating plainly: gate operators run on line voltage and store real spring and counterbalance force. We don’t recommend homeowners open the control box or adjust the arm themselves, especially on a heavy slide gate. It’s the kind of thing that looks simple until it isn’t.
FAQs - Gate Motor & Opener Cost
How much does gate motor repair cost in Los Angeles?
Most gate motor repairs in Los Angeles run $280 to $650, covering the service call, the failed part, and the labor to install and test it. Control board replacements often land in the $320 to $700 range. Call (626) 649-4572 for an exact quote; estimates are free.
Is it cheaper to repair or replace a gate opener?
Repair is cheaper when the operator is under about ten years old and only one part has failed: that’s typically $280 to $650 versus $1,100 to $2,600 for a full replacement. Once the board, the motor, and the sensors all need work at the same time, replacement usually wins on cost per year. We’ll show you both numbers in writing and let you decide.
How much does a new gate opener cost installed in Los Angeles?
A new opener installed in Los Angeles starts around $1,100 for a single-leaf swing gate and runs to about $2,600 for a heavier sliding gate, including the operator, mounting, wiring to the existing power source, and full calibration. If a new power run is needed, add $450 to $1,800. Call (626) 649-4572 for a free written estimate.
Can you come the same day?
In most cases, yes. Calls are answered by a live person 24 hours a day, and a technician can often reach you the same day for a stuck or unsafe gate. You’ll have a written price before any work begins, so there’s no surprise at the end. Call (626) 649-4572 and we’ll give you a real window.
Do you charge extra for shoe covers, drop cloths, or cleanup?
No. Shoe covers and drop cloths on every visit, plus a photo of the clean-up before the technician leaves, are both included at no extra charge. If the gate motor lives in a garage you walk through, your floors stay clean and we’ll ask before we move anything. That’s part of the Cedarwell C.A.R.E. routine on every job.
Why Families in Los Angeles Call Latch & Post
We’ve been at this since 2009, part of the Cedarwell family of independently owned and operated gate specialists. Every repair and installation is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right, no argument and no fine print. Technicians are background-checked, uniformed, and factory-trained on the brands families in Los Angeles actually own. We can schedule around nap time if quiet matters, and we knock before we touch anything.
Pricing reflects the Los Angeles market as of 2026. Latch & Post Gate Repair offers free estimates - call (626) 649-4572.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Los Angeles since 2009.
What Our Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco





Before
After
Before
After
Before
After