Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Los Angeles?
Gate Installation services in Los Angeles typically run $1,800 to $6,500 for a single residential gate, with most homeowners landing around $3,200. A basic manual wood or chain-link gate sits at the low end, while a wide driveway gate with an operator and keypad pushes past $6,000. The single biggest swing factor is whether you’re adding an electric opener, since that alone can add $1,200 to $2,800 to the project.
We’ve been installing gates in Los Angeles since 2009 as part of the Cedarwell family of independently owned gate specialists, and the range above reflects what we actually write on estimates across the city, not a national average pulled from a data site.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why you’ll get a written price before we touch anything.
Key Takeaways
- Most single residential gate installations in Los Angeles run $1,800 to $6,500.
- Electric gate installation adds $1,200 to $2,800 on top of the gate and post cost.
- Permits and hillside footings are the two costs Los Angeles homeowners forget to budget for.
- You’ll always see a written price before work begins. No pressure to accept.
- Calls are answered by a live person 24/7. Reach us at (626) 649-4572.
Gate Installation Cost Breakdown (2026)
Here’s how the numbers break down line by line for the Los Angeles market. Your written estimate will show the exact figure before any work starts, so there are no surprises mid-project.
| Line Item | Typical Cost Range |
|---|---|
| Gate material (wood, vinyl, wrought iron, aluminum) | $600 - $2,800 |
| Posts and footings (includes concrete and digging) | $350 - $1,200 |
| Hinges, latches, and hardware | $120 - $450 |
| Electric gate operator (LiftMaster, FAAC, BFT, etc.) | $1,200 - $2,800 |
| Keypad, remote, and safety sensors | $180 - $600 |
| Permit and inspection (when required by the city) | $200 - $650 |
| Labor and site prep | $400 - $1,100 |
What pushes a Los Angeles gate install toward the high end? Hillside properties in Echo Park and Silver Lake often need deeper footings and sometimes a retaining solution before the post can go in. Wide driveway gates in Encino or Sherman Oaks that span 16 feet or more need heavier posts and a bigger operator, which moves the number up fast. On the other end, a standard 4-foot side-yard gate on flat ground in a neighborhood like Highland Park can land in the $1,800 to $2,400 range without much drama.
Brand matters too. We install and service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we’re factory-trained on all of them. Choosing a brand we already know well keeps the labor predictable and the first-visit fix rate high.
What Affects Gate Installation Pricing in Los Angeles
- Gate width and weight. A 4-foot pedestrian gate needs far less steel and concrete than a 20-foot driveway gate. Weight drives both the post size and the operator size, and both drive cost.
- Manual vs. electric. This is the single biggest line item. Adding an operator, sensors, and a keypad is a $1,400 to $3,400 swing on top of the gate itself.
- Property slope and soil. Los Angeles sits on everything from flat valley ground to steep canyon lots. A canyon property in Studio City or a hillside lot in Mount Washington often needs engineered footings, which adds $400 to $1,500.
- Material choice. Vinyl and basic wood sit at the affordable end. Wrought iron and custom aluminum climb quickly, especially when the gate needs to match existing fencing.
- Permit requirements. The City of Los Angeles requires permits for many electric gate installations and for gates over a certain height. We’ll tell you up front whether your project needs one, including the fee range and inspection timeline.
- Access and parking. A narrow driveway in Koreatown or a tight alley in West Adams can slow the job down. That time shows up as labor, so it’s worth knowing before the estimate is written.
We also think about what happens after the install. If your kids or pets use the gate daily, we’ll walk you through the safety sensors and auto-reverse settings before we leave, and show you how to test them in about thirty seconds. That walkthrough is part of every job, and it’s included.
How to Save on Gate Installation
There are a few honest ways to keep the number down without cutting corners on the parts that matter.
- Reuse what’s solid. If your existing posts are sound and properly set, we can sometimes mount a new gate on them instead of pouring new footings. That alone can save $350 to $900.
- Bundle a repair. If your old gate just needs a hinge or latch replaced, we can handle that first and quote the full installation separately. Sometimes the repair buys you a year or two before you need the new gate at all.
- Pick a brand we already know. Choosing from the lines we’re factory-trained on, like LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule, keeps labor predictable.
- Schedule in a slower month. Late winter and early spring are quieter for gate work in Los Angeles than the summer rush.
- Get the written price first. Every visit starts with a written price, so you can compare apples to apples before anyone picks up a tool.
If you want a real number for your specific gate, call (626) 649-4572. Estimates are free, and a live person picks up whether it’s a Tuesday afternoon or a Sunday night. You can also read more about our Gate Installation in Los Angeles service to see how the process works from first call to final walkthrough.
FAQs - Gate Installation Cost
How much does a basic gate installation cost in Los Angeles?
A basic single residential gate in Los Angeles runs $1,800 to $3,000 installed, including the gate, posts, footings, and hardware. That range assumes flat ground and a manual gate. Call (626) 649-4572 for an exact quote based on your property. Estimates are free.
How much does an electric gate installation cost in Los Angeles?
Electric gate installation in Los Angeles typically costs $3,200 to $6,500, including the operator, sensors, keypad, and remotes. The operator brand is the main variable, with LiftMaster, FAAC, and BFT sitting in the mid to upper range. Call (626) 649-4572 and we’ll give you a written number before any work begins.
Is it cheaper to repair my gate or install a new one?
Repairs usually cost $180 to $650, while a new installation runs $1,800 and up. If your posts and frame are solid, repair is almost always cheaper in the short term. If the posts are rotted or the frame is bent, replacing is often the better long-term value. Call (626) 649-4572 and we’ll tell you honestly which one makes sense.
Do I need a permit to install a gate in Los Angeles?
Many electric gate installations in Los Angeles require a permit, and the fee typically runs $200 to $650 depending on the scope and inspection requirements. Height and location also matter. We’ll tell you during the estimate whether your project needs one, so you’re not caught off guard. Call (626) 649-4572 to walk through your specific situation.
Can you install a gate the same day?
Same-day installation is possible for standard pedestrian gates when the material is in stock and the site is straightforward. Most full driveway and electric installations run one to three days from start to finish. Call (626) 649-4572 to check availability for your address.
What to Expect From Us on Installation Day
We lay drop cloths on the floor and put on shoe covers before we step inside, because the job often touches the garage side of the gate and the controller mounted on your wall. Your floors stay clean. We ask before we move or touch anything, including plants or furniture near the gate line. If you have a sleeping child or a napping dog, we can run quieter tools during that window. And when the job is done, your technician takes a photo of the clean-up before leaving.
Every installation is backed by the 365-Day Done Right Promise. If something isn’t right, we make it right. No argument, no fine print.
If you’re comparing options and want a straight answer on what your gate will cost, start with our home page or give us a call. We’ll give you a written price, walk you through the brand choices, and let you decide on your own time.
We serve homeowners across Los Angeles, from the Valley to the Westside, and we’ve been doing this since 2009. Whether your project is a simple side-yard gate or a full electric driveway system, the process is the same: written price, careful work, clean exit.
Pricing reflects the Los Angeles market as of 2026. Latch & Post Gate Repair offers free estimates - call (626) 649-4572.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Los Angeles since 2009.
What Our Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide