Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Union City
Gate repair in Union City almost never looks like a long driveway gate swinging open. Here, it’s a narrow iron passage gate between two attached row houses that won’t latch anymore, or a roll-down security gate on Bergenline Avenue that groans halfway down and stops. We work on those every week. Latch & Post Gate Repair is a Cedarwell-family gate specialist, not a general handyman, and our technicians are factory-trained on the brands families and shop owners in Union City actually use: FAAC, BFT, Linear, and Viking among them. If your gate is binding, sagging, or dead, call (626) 649-4572. A live person answers, any hour.
Why Latch & Post Gate Repair Is Union City’s Preferred Gate Repair Company
Most of the gates we service in Union City were hung decades ago, before modern safety edges and photocells were standard. That means our Electric Gate Repair in Union City involves different work than in the suburbs. That means the work here is different from the suburbs. We’re not resetting a belt on a two-year-old driveway opener near Fremont. We’re rebuilding corroded hinge posts on a 1940s iron passage gate off Paterson Plank Road, or replacing a bottom rail on a Bergenline Avenue roll-down that has cycled ten times a day since before cell phones. Our techs know what Union City’s salt-laden Hudson humidity does to cast iron, and they know which control boards can be retrofitted and which ones aren’t worth the solder.
Every visit includes a written price before work starts, shoe covers and drop cloths inside your home or shop, and a photo of the cleanup before we leave. That’s the Cedarwell Care Promise, and it’s not an upsell. It’s just how we work. Cody Beckman, who leads our team, holds every technician to the same routine: clean floors, quiet tools when kids are asleep, and a straight answer on whether a repair will actually hold or whether replacement is the cheaper path. We back all of it with the 365-Day Done Right Promise. If the repair isn’t right, we make it right.
For a full picture of what we do, see our Gate Repair service page. And if you’re checking whether we cover your block, we do. Union City is central to our Bay Area service area, and our crews are here regularly.
Wood Gate Repair in Union City
Wood gate repair is a smaller part of our work in Union City than in towns with detached lots, but it’s not rare. The few wood gates here tend to protect rear yard entries or side passages on the city’s mixed-use properties, and they rot fast when they sit against brick walls that never dry out fully. A sagging wood gate in Union City usually needs the hinge-side post inspected first. If the post is soft at the base, new hardware won’t hold for long. We tell you that before we quote.
Post and hinge replacement
When a wood gate drags on the concrete or won’t stay closed, the problem is almost always the post, not the panel. We remove the rotted post, set a new pressure-treated post in concrete, and remount the gate with galvanized hinges sized for the weight. Most post and hinge replacements in Union City run between $240 and $480, depending on the size of the gate and how much concrete work the setting requires.
Panel repair and hardware
If the post is still sound, we can often save the panel. That means replacing split pickets, re-securing the frame, and swapping worn latches and handles. These jobs are usually quick, between $140 and $260. You’ll see the exact number in writing before we begin.
Driveway Gate Repair in Union City
Driveway gate repair is the honest exception in Union City, because the housing stock has almost no detached single-family lots. When we do get driveway gate calls, they’re typically for commercial properties, small parking areas, or the rare newer development near the city’s edge. The work is the same as anywhere: operator diagnostics, track alignment on sliders, hinge and post work on swing gates, and safety edge testing. The difference is that we know these gates are not typical for Union City, so we don’t keep a warehouse of parts for them locally. Most driveway gate repairs in Union City run between $220 and $650, and we quote the job after seeing the gate and the operator, never over the phone.
Operator and safety system repair
When an automatic driveway gate stops responding or reverses for no reason, the operator usually needs recalibration, or a safety edge has failed. We test the photocells, the loop detector if there is one, and the force settings before swapping parts. This kind of diagnostic repair runs $180 to $380 in Union City.
Steel swing gate and track repair
For commercial driveway gates, the common failures are worn rollers, rusted tracks, and hinge plates pulling out of the post. We repair what can be repaired and replace what cannot. Steel gate and track work in Union City typically lands between $320 and $800 depending on the size and whether we’re on a ladder or welding in place.
Trusted Brands We Service in Union City
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Union City’s pedestrian passage gates and Bergenline Avenue roll-downs, BFT and FAAC show up most often, with older LiftMaster units on many storefronts. We carry the common control boards, limit switches, and safety edges for these brands in our service vehicles, so we’re not waiting on a parts shipment to finish most jobs. When a part is obsolete, which happens often on gates installed in the 1990s, we tell you directly and lay out the retrofit options with honest numbers.
Common Gate Repair Problems We See in Union City Homes
- Corroded hinge posts on iron passage gates. The Hudson River’s salt humidity settles into cast iron and eats the post from the inside. The gate sags, the latch stops lining up, and the fix requires post work, not just a hinge swap.
- Seized hinges in north-facing passages. Gates between attached buildings on narrow streets like New York Avenue never get sun in winter. Freeze-thaw cycles swell the metal, and the gate becomes impossible to open without hinge replacement and frame correction.
- Roll-down security gate failures on Bergenline Avenue. Daily cycling on storefronts causes spring bottom-rail damage, snapped slats, and motor burnout. Many of these gates also lack working safety photocells, so they grind through obstructions instead of reversing.
- Obsolete operators on decades-old gates. A lot of Union City’s passage gates and storefront gates still run on control boards that went out of production years ago. Retrofitting is sometimes sensible. Sometimes it’s not, and we’ll tell you when replacement is the better use of your money.
Pricing for Gate Repair in Union City, CA
Most standard gate latch replacements in Union City run between $90 and $180. Hinge and post repairs on iron passage gates fall between $200 and $450 depending on the condition of the post. Roll-down security gate repairs on Bergenline Avenue, including slats, bottom rail, or motor work, typically range from $180 to $600 depending on the operator and the extent of the damage. Automatic gate operator diagnostics run $120 to $220. Every quote is written and agreed before we start. No one works on your gate without your OK on the number. Call (626) 649-4572 for a free estimate, and we’ll come out and tell you exactly what it costs, not a range.
We Also Serve Cities Near Union City
Our Gate Repair service extends to Fremont, Newark, San Lorenzo, and Castro Valley. If you’re a few blocks across the city line, we still come to you, same written price and same cleanup routine, no matter which side of the boundary you’re on.
Serving Union City, CA - Our Local Coverage Area
We’re based in the Union City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Union City
It depends on the post, not the panel. If the hinge post is still solid, we can retrofit a modern operator like BFT or FAAC onto an old iron passage gate for $600 to $1,200, including the operator and safety edges. If the post is corroded or the frame is racked, you’d be mounting a new operator onto a failing structure. In that case a new gate and post usually costs less over five years, and we’ll show you both numbers before you decide. Call (626) 649-4572 and we’ll assess it on site.
Bergenline Avenue storefront gates cycle dozens of times a day, every day. Pedestrians clip the bottom rail, carts hit it, and the repeated impact crumples the rail and snaps slats. The added drag then burns out the operator motor. We replace bottom rails and slats, rebuild the operator, and add a safety photocell so the gate reverses before the next collision. Most of these repairs run $200 to $500 depending on the gate width.
Yes. Gates in north-facing passages between attached buildings on streets like Palisade Avenue never see direct sun from November through March. Moisture from the Hudson River sits on the metal, and freeze-thaw cycles seize hinges and warp frames. We see the same failure pattern week after week: a gate that worked fine in October won’t budge in January. Hinge replacement and sag correction usually solve it for good.
First, check whether the safety photocells are aligned and clean. If the beam is broken or the lenses are dirty, the gate won’t reverse on contact. Next, the force setting on the operator may have been turned up too high, which means the gate will push through an obstruction instead of reversing. We test both during our diagnostic, which costs $120 to $220 in Union City. Don’t test the reversal with your hand; use a cardboard box or call us instead.
Often, yes. If the post is still sound, we can cut out the corroded hinge mount, weld in fresh steel, and hang the gate level again. That work runs $180 to $320 for a typical Union City passage gate. If the post is too far gone, replacing the gate without a new post is a waste of money, and we’ll tell you so plainly. Call (626) 649-4572 for a free estimate either way.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Union City since 2009.