Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Duncanville, TX
Latch & Post Gate Repair is a Dallas-Fort Worth gate specialist working in Duncanville, and the work here follows a pattern we see on nearly every street built between the 1960s and early 1980s: cedar and pine gate posts set too shallow in expansive black clay, now rocking loose with every wet-dry season. Our crews handle gate repair, gate installation, and electric gate repair across Duncanville, with a written price before any work starts and shoe covers on every visit. If you need a gate looked at, call (626) 649-4572 and a live person will answer, day or night.
Why Duncanville Homes Are Different
Duncanville’s residential streets, from the older blocks near Main Street to the brick-veneer ranches that filled in through the 1970s, sit on North Texas black clay that shrinks into deep cracks in summer and swells hard after spring rain. That annual movement works gate posts loose in a way that sandy or loamy soil never does. The original concrete footings under many posts here are only 18 to 24 inches deep, far short of what the clay demands, so the post flexes with the seasons until hinges bind, latches miss the strike, and the gate drags across the walk.
The practical result: a gate repair in Duncanville that only adjusts hinges or relocates a latch will often sag again within months. The real fix is pulling the post and resetting it on a deeper concrete footing sized for clay movement. Wooden privacy fences and gates from the original build are also commonly rotted at ground level where the post meets moisture-retaining soil. Triple-digit summer heat warps boards and expands metal hardware; heavy spring rains swell the same ground back. It is a compounding cycle, and it is the reason a Duncanville gate job usually comes down to the post, not just the panel.
Our Main Duncanville Services
The two call types we hear most from Duncanville homeowners are gates that have sagged or stopped latching and gates that were never built for the clay movement under them in the first place. Each service below links to its own Duncanville page.
Gate Repair in Duncanville
Sagging hinges, a latch that will not catch, a gate that scrapes the driveway: these are almost always post problems at the root. We pull the post, clear the old footing, and set a new one deep enough to hold through the swell-and-shrink cycle. We also rebuild rotted post bases, replace sprung hinges, and refit latches and strike plates so the gate closes without lifting or dragging. One local condition shapes every estimate here: if the post is original to the home, we plan for a deeper reset rather than a surface adjustment. See the full breakdown on our Gate Repair in Duncanville page.
Gate Installation in Duncanville
A new gate in Duncanville needs more than a panel hung between two posts. We set posts below the shrink-swell zone, size the footings for the clay, and choose materials that will hold plumb through a North Texas summer. Cedar, treated pine, steel frame and wood infill, aluminum: the choice depends on sun exposure, fence line, and how the gate is used. Every install starts with a measure and a written price, and we protect the yard and floors while we work. Full scope and pricing are on the Gate Installation in Duncanville page.
Electric Gate Repair in Duncanville
When an opener quits, only runs one way, or starts grinding, the first question is whether the gate itself still swings freely on its posts. In Duncanville, the answer is often no: the same clay movement that binds a manual gate strains an opener’s motor, strips gears, and burns circuit boards. We service the operator and the gate together, testing the full swing before we touch a control board. FAAC, BFT, Linear, and Viking openers are all within our training. Learn more on the Electric Gate Repair in Duncanville page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Duncanville
The brand names we see on Duncanville garage doors, driveway gates, and operators are LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We carry common parts for these lines, and we quote the fix before we order anything. See our brands for the full list of what we service.
Pricing for Gate Company in Duncanville, TX
| Service | Typical range in Duncanville |
|---|---|
| Gate latch replacement | $85-$180 |
| Hinge replacement (pair) | $120-$240 |
| Gate post reset with deeper concrete footing | $350-$750 per post |
| Gate post replacement (rotten base, new post set) | $450-$900 per post |
| Sagging gate realignment (hinge and latch adjustment) | $120-$260 |
| Wood gate rebuild (same frame, new boards and hardware) | $300-$650 |
| New wood gate, standard walk-through size (installed) | $500-$1,200 |
| New steel-frame gate with wood infill (installed) | $900-$2,000 |
| Electric opener diagnosis | $95-$160 |
| Electric opener board or arm repair | $250-$600 |
| Safety sensor replacement (photo eyes, edge) | $150-$350 |
| Full electric opener replacement (operators like FAAC, BFT, Linear) | $1,200-$2,800 installed |
What pushes a Duncanville price toward the upper end is usually what we find when we dig: a rotted post base, a footing far too shallow for the clay, or an opener that has been fighting a binding gate long enough to damage the motor. Whatever the scope, you get a written price before any work begins, and that price is what you pay unless we find something new and you approve the change first.
Neighborhoods We Serve in Duncanville
We work throughout Duncanville, including the established streets near Main Street and the subdivisions that grew up through the 1970s. If you are within the city limits, we can usually have a technician to your gate within one business day for non-emergency calls.
- Historic blocks around Main Street
- Thorntree
- Greenbriar Estates
- Red Bird area near Duncanville Road
- Subdivisions off Camp Wisdom Road
Service Area – Cities Near Duncanville
Our Dallas-Fort Worth crews serve Duncanville directly, and we also cover the surrounding cities for gate repair and installation. We work in DeSoto, TX, Cedar Hill, TX, Lancaster, TX, and Grand Prairie, TX. If you are in a nearby area and not sure whether we cover your street, call us and we will tell you straight.
Serving Duncanville, TX - Our Local Coverage Area
We’re based in the Duncanville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Duncanville
For most non-emergency repairs in Duncanville, we can have a technician out within one business day. Emergency calls like a gate that will not close or an opener that has failed are handled around the clock; a live person answers the phone 24/7 at (626) 649-4572 and we schedule the soonest available slot.
Many Duncanville HOAs have fence and gate height, material, and color standards, so it is worth checking your covenant before installing a new gate. Repairs that match the existing gate rarely need HOA review. We can work from your HOA’s approved specs if you have them on hand.
Yes. Every visit, before any work starts, you get a written price with the scope of the job and the total. If we find something deeper, like a rotted post below grade, we stop and explain the change before touching it. No surprise charges and no pressure to accept.
Call (626) 649-4572 for a free estimate on gate work in Duncanville. A live person answers, we show up with shoe covers and drop cloths, and you get a written price before we begin.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Duncanville Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide