Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Southlake
Gate repair in Southlake means working on heavy ornamental iron and custom steel driveway gates, almost always paired with commercial-grade automation from Viking, Elite, Ghost Controls, or DoorKing. Most repair calls we answer here involve a gate that’s sagging, dragging, refusing to open, or blowing a control board in the middle of a 100-degree afternoon. We dispatch local crews to Southlake neighborhoods like Timarron, Monticello, and the estates off North Carroll Avenue, and we carry parts for the operators families actually own.
If your gate is acting up this week, call (626) 649-4572. You’ll reach a live person, not a voicemail tree, and we’ll give you a written price before any work begins.
Why Latch & Post Gate Repair Is Southlake’s Preferred Gate Repair Company
Latch & Post Gate Repair operates as part of the Cedarwell family, independently owned and run since 2009 by Cody Beckman and his team. Cody built the company around a simple idea: every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on, and in Southlake that focus matters more than anywhere else.
Southlake homeowners call us because we understand what happens to heavy iron gates sitting on expansive black clay soil. We don’t just swap parts and hope. We check post plumb first, because a leaning hinge post in Timarron will destroy a new operator within a season. Our technicians arrive in uniform, background-checked, and trained on the specific control boards and limit switches in the operators Southlake homes actually use. Shoe covers go on before we step onto your floors, and drop cloths protect the tile and hardwood around your entry.
We’re also the team that answers the phone at 2 a.m. after an ice storm. Southlake’s February freezes put real stress on gate electronics, and when your board won’t fire and your car is stuck inside the property, you need a human voice. You get one. Every call, every night, every weekend.
Wrought Iron Gate Repair in Southlake
Wrought iron gate repair in Southlake almost always comes down to two structural problems: the weight of the panel and the condition of the post carrying it. Older estate gates in neighborhoods like Timarron were often hung twenty or thirty years ago, before automation was added later. The original hinges and posts were never sized for an Elite operator pushing a 500-pound panel open and closed twice a day. Over the years, the added load, combined with Southlake’s soil movement, causes hinges to stretch, welds to crack, and bottom edges to drag.
When we repair a wrought iron gate in Southlake, we start by unloading the panel from the operator, checking hinge alignment, and measuring post plumb with a level. If the post has moved, we reset it before touching anything else. Then we address the gate itself: re-welding cracked pickets, rebuilding stretched hinges, and re-hanging the panel so it clears the driveway by a full two inches. Most wrought iron gate repair work in Southlake runs between $475 and $1,850, depending on whether we’re re-welding, resetting a post, or replacing hardware outright.
Post Reset and Realignment
A leaning hinge post is the single most common cause of a wrought iron gate dragging across pavers in Southlake. We dig out the old footing, set the post back to plumb with new concrete, and brace it while it cures. You’ll see the exact price in writing before we break ground.
Weld Repair and Panel Straightening
Cracked welds at hinge plates and bowed bottom rails are repairable in most cases. We field-weld on site, grind smooth, and repaint to match. If the panel has twisted beyond a quarter-inch of tolerance, we’ll tell you straight, and quote replacement instead.
Metal Gate Repair in Southlake
Metal gate repair in Southlake covers the custom steel, aluminum, and powder-coated gates that dominate the area’s newer estate homes, especially the builds from the late 1990s through 2010s. These gates are often lighter than old wrought iron but hung on operators with tighter tolerances, which means even a minor post shift ripples through the drivetrain quickly. The black clay soil under Southlake heaves and contracts through the year, and on a wide driveway gate that movement concentrates right at the hinge side.
Our metal gate repair work in Southlake typically involves one of three jobs: re-hanging a panel whose bottom edge has started scraping, replacing a failed hinge or roller that has flattened under load, or correcting a frame that was never properly squared at installation. Metal gate repair in Southlake typically runs $350 to $1,500 depending on the extent of the realignment and hardware replacement. You’ll see your written price before we start, and we explain what we’re doing in plain English.
Hinge and Roller Replacement
Heavy steel gates wear out standard hinges faster than lighter residential panels. We install heavy-duty barrel hinges and sealed bearing rollers sized for the actual gate weight, not just what was originally there. This usually resolves the dragging issue without a full panel rebuild.
Frame Squaring and Panel Alignment
If your metal gate has shifted in its frame, we adjust the gate alignment at the hinges and, where needed, re-shim the operator mount. It’s precise work, and Cody’s team tests the full travel path before we call it done.
Trusted Brands We Service in Southlake
We stock local parts for the gate operators Southlake homeowners actually run. That means Viking and Elite swing gate motors on the heavier estate panels, Ghost Controls kits on newer installations, and DoorKing slide operators on the wider driveway systems. We’re factory-trained on all of them. When one of these boards fails after a February ice event or an August heat spike, we don’t order parts and hope. We keep the common boards, limit switches, and battery backups available for fast turnaround in Southlake, and we program everything on site before we leave. If you’re unsure which brand you own, call us and describe the keypad or remote; we’ll identify it from that and tell you what to expect.
Common Gate Repair Problems We See in Southlake Homes
- Leaning hinge posts from expansive clay soil. Southlake’s black clay swells after rain and shrinks in dry heat, which pushes hinge-side posts inward over a 5 to 10 year cycle. The result is a gate that drags across the driveway no matter how much you adjust the operator.
- Burnt-out control boards in sun-exposed operators. Operators mounted on west- or south-facing gate posts sit in direct North Texas sun all afternoon. Sustained 100-degree heat accelerates board failure, and we see more of it in Southlake’s wide, unshaded estate driveways than in older, tree-lined neighborhoods elsewhere.
- Ice storm damage from freeze-thaw cycles. The February 2021 storm froze circuit boards and drained battery backups across Southlake. In the weeks after, we replaced dozens of boards in operators that had worked perfectly for years before the freeze.
- Worn drive gears stripped by dragging panels. When a wrought iron or steel gate drags across concrete, the operator keeps pushing until the drive gear strips. Homeowners often hear grinding for weeks before the gate fails completely. We check the post and the panel before replacing any drivetrain components, because a new gear in a misaligned gate is a repeat repair.
Pricing for Gate Repair in Southlake, TX
Southlake gate repair pricing is shaped by the weight of the gate and the condition of the post. A basic gate realignment or hinge replacement typically runs $350 to $650. Wrought iron gate repair with welding and post reset usually lands between $475 and $1,850. Full metal gate panel replacement or a new operator install on a heavy estate gate can reach $3,000 to $6,500, including the part and labor. The written price we hand you before any work starts is the price you pay. No add-ons after the fact, and if we find something additional mid-repair, we stop and show you before proceeding. Every estimate is free, and every job carries our 365-Day Done Right Promise. Call (626) 649-4572 and we’ll give you a straight number.
We Also Serve Cities Near Southlake
Many of our Gate Repair customers in Southlake refer us to neighbors and family in nearby communities. We regularly serve Colleyville, Grapevine, Flower Mound, and Roanoke with the same written pricing policy and same-day scheduling for urgent repairs. If you live a few minutes outside Southlake, call and ask, we’ll let you know the soonest we can be there.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Southlake
If the board in your old LiftMaster, Linear, or DoorKing operator is obsolete and cannot accept modern UL 325 safety photocells, replacement is usually the safer and cheaper long-term answer. We’ll first test the board and wiring to confirm the actual failure point. If the operator frame and gearbox are still solid, a new board can sometimes be retrofitted, but only if the safety edge and photocell wiring are compatible. We’ll give you a written price for both options and let you decide. Call (626) 649-4572 and we’ll diagnose it over the phone.
Because the operator was never the problem. Southlake’s black clay soil shifts with moisture, and over a 5 to 10 year cycle the hinge-side post on an older estate gate leans inward enough to drop the bottom edge of the panel onto the driveway. No new operator fixes that. We check post plumb first, reset the footing if needed, and then align the hinge geometry so the panel clears the pavers. It’s the difference between a repair that lasts and a new operator that burns out in a season.
Sometimes it’s true, and sometimes it’s a sales line. Older operators without modern UL 325 safety protections, non-monitored photocells, and missing safety edges can run as low as $900 to $1,400 to update with a new board and safety components, assuming the gate itself and the post are sound. If the operator is obsolete and safety retrofits aren’t possible, a full replacement runs higher. We’ll show you exactly what’s needed and what it costs, in writing, before you commit to anything.
Freezing rain gets inside unsealed control boxes, moisture condenses on circuit boards, and the freeze-thaw cycle cracks solder joints and shorts capacitors. Battery backups drain trying to run frozen gearbox lubricants, and when power returns, the board often fails on the first cycle. We see a spike in Southlake service calls every time North Texas gets an ice event, and the fix usually involves a new board, sealed enclosure, and fresh battery backup. Call us and we’ll get to you as soon as possible after the storm.
We repair both. Our techs weld cracked pickets, rebuild stretched hinges, reset leaning posts, and square twisted panels on site. Then we reprogram the operator to match the corrected gate geometry. Most Southlake companies specialize in one or the other. We do both because a gate is one system, and fixing half of it leaves the other half to fail.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Southlake homeowners with honest gate repair since 2009.