Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Round Rock
Gate repair in Round Rock usually costs between $140 and $1,900 depending on what failed, and most jobs we handle are booked and done within a few days. If your gate is dragging, sagging, or the operator is humming without moving, call (626) 649-4572 for a written quote before any work begins. We work on sliding gates, swing gates, and the automated operators that run them across Teravista, Mayfield Ranch, Chandler Creek, and every subdivision in between. Our crews arrive in uniform, lay down drop cloths if we step inside, and never touch anything without asking first.
Why Latch & Post Gate Repair Is Round Rock’s Preferred Gate Repair Company
Round Rock gates fail in patterns, and that’s what makes local knowledge worth something. The same LiftMaster and Elite operators installed across HOA communities in the 1990s and 2000s are now reaching end of life within a season or two of each other. We’ve repaired enough of them in Teravista, Mayfield Ranch, and Chandler Creek to know which models are prone to board failure, which hinge hardware wears first, and which parts we should already have on the truck when we pull up.
Cody Beckman leads our team, and the standard he set is simple: write the price down before the work starts, protect the home while we’re there, and stand behind the repair for a full year under the 365-Day Done Right Promise. That’s not a marketing line. If the gate isn’t right, we come back and make it right. Homeowners in Round Rock Ranch and Round Rock West have leaned on that promise for years. They also know every call is answered by a live person, no matter what time it is.
When you call (626) 649-4572, you’ll get a straight answer about the problem, the cost, and when we can be there. No pressure. Just a written estimate and a date that works.
Sliding Gate Repair in Round Rock
Sliding Gate Repair in Round Rock is one of the most common calls we take, especially in the tighter HOA communities where a swing gate simply won’t fit against a short setback or a shared driveway. A slide gate that jumps its rack, drags on the track, or stalls halfway is usually a combination of three things: a post that has settled out of plumb in Williams County’s expansive clay, a track that has drifted out of alignment, and an operator that’s now working twice as hard to compensate for both.
Most sliding gate repairs in Round Rock run $180 to $680 for track realignment, rack gear replacement, and operator recalibration. If the board or motor is cooked, the job lands between $700 and $1,900 depending on the operator model and whether we can source the board same-day from our local parts stock. You’ll see the exact number in writing before we start.
Track and Rack Alignment
When black clay swells after a wet spring, the post holding the track can lift or tilt by half an inch. That’s enough to make the gate grind, slow down, or stop entirely. We reset the post footing if needed, shim it true, and realign the track so the gate rolls freely without side-loading the operator.
Operator Recalibration and Board Replacement
A LiftMaster or FAAC operator that’s been fighting a misaligned gate for months often burns out its limit switches or control board. We recalibrate where possible and replace boards or motors where not. The job can often be done the same morning without lifting the gate off its track.
Wrought Iron Gate Repair in Round Rock
Wrought Iron Gate Repair in Round Rock usually involves sagging hinges, broken pickets, rust at the lower rails, or a latch that no longer catches after the gate shifted with the soil. Many of the iron gates in Round Rock’s 1990s and 2000s subdivisions came from the same regional fabricators, so we see the same hinge wear patterns repeat from street to street in Mayfield Ranch and Chandler Creek.
Basic hinge replacement, sag correction, and latch repair on a wrought iron gate in Round Rock runs $140 to $420. Rust repair and reinforcement welding add more, usually $300 to $800 depending on how much of the lower rail needs cutting and patching. If the gate is too far gone, we’ll tell you that too and quote a replacement honestly.
Hinge Replacement and Sag Correction
When a heavy iron gate sags, the top hinge usually takes the load and the bottom hinge loosens. We re-square the frame, replace worn hinge barrels, and set the gate so the latch catches cleanly without lifting. We choose a lubricant that won’t harm pets or leave a chemical smell near the house.
Rust and Weld Repair
Lower rails and picket bases rust first because water splashes up from the ground. We grind back the affected sections, weld in fresh material where needed, and treat the repair so it doesn’t come back within a season. The gate stays in place while we work, so your driveway access never disappears.
Trusted Brands We Service in Round Rock
We’re factory-trained on the operators Round Rock homes actually have: LiftMaster, FAAC, BFT, and Linear. We also work on Viking gate operators, which are common on the heavier slide gates around HOA entry points. Because we know which models were installed in which build windows across Round Rock’s subdivisions, we stock boards, limit switches, and remote receivers locally so repair doesn’t stall waiting on a parts shipment from out of state. When you call, tell us the brand on the control box and we’ll likely have what’s needed already loaded.
Common Gate Repair Problems We See in Round Rock Homes
- Heaving posts in black clay soil. Williamson County’s Vertisol clay swells after rain and shrinks in drought, tilting hinge posts and throwing gates out of square. The fix requires resetting the footing, not just tightening bolts.
- Thermal fatigue on south- and west-facing operators. Round Rock summers regularly push past 100°F, and operators mounted on sun-exposed posts cook their windings and boards years earlier than shaded units. We see it most on LiftMaster and Elite models from the early 2000s.
- Intermittent loop detectors at HOA keypads. The loop detectors buried in shared driveway approaches were installed in the same build windows across Teravista and Chandler Creek, and they’re now failing on the same schedule. The gate opens one day and refuses the next.
- Rack gear stripped on slide gates. When a post drifts and the gate starts dragging, the rack and pinion takes the abuse until teeth shear off. The operator still runs, but the gate won’t move. We replace the rack section and realign the track in one visit.
Pricing for Gate Repair in Round Rock, TX
Gate repair in Round Rock breaks into a few clear bands. Hinge and latch work on an iron gate runs $140 to $420. Slide gate track and rack repair runs $180 to $680. Operator board or motor replacement runs $700 to $1,900. Full wrought iron panel rebuilds with welding and rust repair run $300 to $800. The written price you get before we start is the price you pay. We don’t add dispatch fees or surprise line items. If a repair uncovers something bigger than we expected, we stop and call you first with a new written number before touching it. Estimates are free. Call (626) 649-4572 and we’ll walk you through it.
We Also Serve Cities Near Round Rock
Our Gate Repair in Round Rock crews also cover Pflugerville, Hutto, Georgetown, and Cedar Park for the same written-quote, shoe-covers, drop-cloths standard. If you’re in one of those communities and your gate is dragging or your opener won’t respond, call us and we’ll route the nearest technician to you.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Round Rock
Because the black clay under your posts swells and shrinks with every wet-dry cycle in Williamson County, and if the original post was set in a shallow footing or without enough rebar, it will keep moving until the footing is reset. We excavate the old footing, set the post deeper with proper concrete and rebar, and let it cure before re-hanging the gate. Call (626) 649-4572 for a free assessment if your posts have tilted twice.
Usually both. The gate begins as a mechanical problem: a track out of alignment or a post that’s drifted, and then the operator’s limit settings get pushed past their stop point. We fix the mechanical issue first, then recalibrate the operator. Most slide gate repairs in Round Rock run $180 to $680, and you’ll see the exact number in writing before we start.
Yes. We keep one lane open while we work on the other, and if the gate must stay in the closed position, we set up a safe pedestrian path and keep vehicle access through the adjacent lane or a temporary stop-gap. We coordinate this with the HOA board or property manager before the work day begins. This is standard for the community gates we service across Round Rock.
Yes, every automatic gate in Round Rock that opens and closes under power needs functioning safety photocells and, where applicable, a working reverse loop or contact edge. That’s a safety requirement, not an add-on. We test the photocells on every automatic gate repair we do, and if they’re failing or misaligned, we replace them as part of the written quote.
Not usually. A sagging iron gate usually means a worn top hinge, a hinge post that’s drifted, or a broken weld at the corner of the frame. We can often square the gate, replace the hinge hardware, and reinforce the frame for $140 to $420. If the steel is rusted through in multiple places, then a replacement makes better sense, and we’ll show you why with a straight quote either way. Call (626) 649-4572 for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family of independently owned and operated gate specialists since 2009.