Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Round Rock, TX
Gate work in Round Rock follows a pattern you won’t find in older Austin neighborhoods. The city grew fast, mostly between the 1990s and 2010s, and much of it was built as HOA master-planned communities with automated entry gates installed by the same regional contractors within the same five-to-ten-year windows. That means whole subdivisions now need the same repairs at the same time. We work on swing gates, slide gates, driveway gates, and pedestrian gates across Round Rock, and we quote every job in writing before any work starts. Call Latch & Post Gate Repair at (626) 649-4572 for a free estimate.
Why Round Rock Homes Are Different
Two things shape most gate repairs in Round Rock. The first is the soil. Williamson County sits on expansive black clay, and it swells when it rains and shrinks when it doesn’t. Over a few seasons, gate posts heave, tilt, and settle out of plumb. A gate that latched fine in March will drag or refuse to close by August, not because the hardware failed but because the post moved. Hinge stress and track misalignment are the usual results.
The second is the heat. Round Rock summers regularly push past 100°F, and south- and west-facing gate operators take the worst of it. Motor windings and circuit boards age faster here than in shadier, cooler parts of Central Texas, so a unit that lasts twelve years in some cities may need attention at eight or nine here. In communities like Teravista, Mayfield Ranch, and Chandler Creek, we routinely see the same operator models failing in the same season because they were installed by the same crews around the same time. When we identify a failing unit in one neighborhood, we know what to expect in the next one over. That repetition makes our parts stocking and diagnosis faster for Round Rock homeowners.
Our Main Round Rock Services
Most Round Rock families call us for one of three things: a gate that won’t latch or move, a new gate that fits the look of the neighborhood, or an automated gate that stopped responding to a remote. Each has its own page below with local pricing and detail.
Gate Repair in Round Rock
Repair work here usually starts with a post that has shifted in the clay or a hinge that has worn from years of that shifting. We realign, replace what is worn, and set the latch so the gate closes the way it should. Sliding gates get track adjustments and roller replacements; swing gates get hinge work and sag correction. Round Rock homes often have matching gate hardware across an entire facade, so we take care to match what is already there. Every repair starts with a written price before we touch anything. See Gate Repair in Round Rock for full details and pricing.

Gate Installation in Round Rock
New gate work in Round Rock usually means matching an HOA-approved style and finish. Many master-planned communities here have design standards for wrought-iron and aluminum gates, and we take those seriously. We measure, order, and set the gate with posts deep enough to handle Williamson County’s shifting clay. Installation is scheduled, not rushed, and the price comes in writing before the first post hole is dug. No same-day promises, just a straight quote and a clean install. See Gate Installation in Round Rock for what is included.

Electric Gate Repair in Round Rock
Electric gate failures in Round Rock follow the heat. Circuit boards and motor windings on south-facing operators wear faster than the hardware around them, and the clay soil adds alignment problems that put extra strain on the motor. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we keep common boards and remotes for those brands in our local stock. A diagnosis visit comes with a written price for the fix. See Electric Gate Repair in Round Rock for the full scope and local service notes.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Round Rock
We’re factory-trained on the brands Round Rock HOA communities actually run, including FAAC, BFT, Linear, and Viking operators. We keep common remotes, boards, and hardware in local stock for these lines, which shortens turnaround when a board dies or a remote stops pairing. See our brands for the full list.
Pricing for Gate Company in Round Rock, TX
These are the price ranges we typically see for gate work in Round Rock. Every quote is written and agreed before any work begins.
| Service | Typical range in Round Rock |
|---|---|
| Standard gate-latch replacement | $140 - $300 |
| Hinge replacement on a swing gate | $180 - $400 |
| Slide gate track realignment | $150 - $300 |
| Gate post bracing or reset | $300 - $750 |
| Gate sag correction | $180 - $400 |
| Operator motor replacement | $600 - $1,200 |
| Circuit board replacement | $350 - $700 |
| Remote or keypad programming | $80 - $180 |
| Full gate installation | $1,800 - $5,500+ |
In Round Rock, the two things that push a quote toward the high end are a post that has shifted badly in the clay and an operator that has been cooking in direct afternoon sun for a decade. You’ll see the exact number in writing before we start, and the price we quote is the price you pay.
Neighborhoods We Serve in Round Rock
We work across Round Rock, from the HOA communities along University Boulevard to the older neighborhoods near downtown. Because so many of these subdivisions were built with the same gate hardware in the same windows, we can often diagnose a problem before we arrive based on what we’ve seen a few streets over.
- Teravista
- Mayfield Ranch
- Chandler Creek
- Round Rock Ranch
- Brushy Creek
Dispatch and scheduling for Round Rock are coordinated from the brand’s Austin office, with local crews serving the city directly. Most service calls are scheduled within the week, and emergency repairs go out as soon as a technician is available.
Service Area – Cities Near Round Rock
We also serve families in Pflugerville, TX, Hutto, TX, Georgetown, TX, and Cedar Park, TX. Each city has its own soil and subdivision patterns, and the work follows those conditions, but the written-price-before-work promise applies everywhere we go.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Round Rock
Most non-emergency gate repairs in Round Rock get scheduled within the week, and emergency calls, like a gate that won’t close or secure a backyard, go out as soon as a technician is available. Call (626) 649-4572 and a live person will answer, any hour.
Many Round Rock master-planned communities have architectural review standards for gate style, finish, and height, especially in newer subdivisions. We work to those standards on installation jobs and can note HOA requirements in your written quote before work begins. Repairs to existing gates rarely require separate approval.
We cover the full city, including Teravista, Mayfield Ranch, Chandler Creek, Round Rock Ranch, Brushy Creek, and neighborhoods around downtown. Dispatch is coordinated from the brand’s Austin office, and crews serve Round Rock directly.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Round Rock Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide





Before
After
Before
After
Before
After