Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Paterson
Most gate repairs we handle in Paterson come down to one of two things: a post that has pulled loose from old brick or a bottom rail that has started rusting out, often both. If your gate is dragging, sagging, or the operator won’t cycle, we can usually have a tech to you the same day you call. Latch & Post Gate Repair works on wrought iron, steel, aluminum, and automatic gate systems across Paterson, from the Riverside and South Paterson neighborhoods up through Eastside Park and the streets around Main Street. Call (626) 649-4572 and a live person answers, any hour.
Why Latch & Post Gate Repair Is Paterson’s Preferred Gate Repair Company
We have been repairing gates since 2009, and Paterson’s housing stock is distinct enough that it rewards a specialist. A gate post set into a 1910 brick pier with crumbling lime mortar fails differently than one sunk in a concrete footing in Wayne or Clifton. When we schedule a Paterson job, we come knowing the house likely has a narrow side passage, a brick or stucco pillar at the gate, and a floor inside the front room that matters as much as the hinge outside. We lay drop cloths and put on shoe covers before we step in, every visit, and we photograph the cleanup before we leave. Cody Beckman oversees our gate crews, and he holds the whole team to the same routine: written price first, quiet tools when kids are asleep, and a gate that latches without lifting. Our Gate Repair team carries parts for the brands Paterson homes actually use, so the first visit usually finishes the job.
Wrought Iron Gate Repair in Paterson
Wrought iron gate repair in Paterson usually means one of three things: a hinge has sheared where a post heaved out of plumb, a bottom rail has rotted through after seasons of standing water, or a weld has cracked along a scroll or picket joint. On old brick rowhouse lots, the post moves first, and the iron follows. We reset or anchor the post, correct the sag, rehang the gate, and weld or replace what broke, then finish with paint-matched touch-up so the repair does not read as a patch.
Post Reset and Sag Correction
The most common wrought iron failure we see in Paterson is a hinge post leaning toward the latch side, which drops the gate so it drags against the walk. We dig out the degraded mortar around the post base, set the post plumb with a proper concrete anchor, and then rehang the gate so the top rail runs level. The gate should swing with one hand afterward.
Rust Repair on Scrolls and Bottom Rails
Bottom rails on Paterson iron gates often sit close to damp ground, especially in the floodplain streets east of the river. We cut out the corroded section, weld in matching solid steel, grind the joint flush, and prime and paint to match the existing finish. A gate that looked ready for the scrap heap can usually be saved for a few hundred dollars rather than replaced.
Metal Gate Repair in Paterson
Metal gate repair in Paterson covers steel, aluminum, and combination gates on driveways, side yards, and commercial storefronts. The repair pattern follows the material: steel rusts and seizes at hinges, aluminum racks and bends at the corners, and hollow steel posts crush where cars clip them in tight Paterson driveways. We straighten frames, replace hinge hardware, weld cracks, and repair or replace pickets and rails so the gate closes and locks correctly.
Automated Gate Frame Straightening
A metal gate that has been hit or racked by a stiff wind will bind halfway through its travel, which makes the operator strain and overheat. We pull the gate back into square, reinforce the corners, and confirm the opener’s travel limits and force settings still match. If the operator was damaged, we service the board, gear box, or arm rather than selling a full replacement.
Commercial Slide and Storefront Security Gates
Roll-down steel gates and slide gates on Paterson’s commercial blocks take an entirely different kind of abuse: repeated overnight cycling, weather exposure, and the occasional vehicle nudge. We repair the rack and pinion drive, replace broken rollers and bottom bars, and get the gate moving before the next opening shift. When a shop owner on Main Street cannot get the gate up at 7 a.m., we treat that as an emergency call.
Trusted Brands We Service in Paterson
Our technicians are factory-trained on the equipment Paterson families and business owners actually run, including FAAC, BFT, and Linear openers, plus Viking and Ghost Controls hardware where it is installed. We stock common control boards, remotes, photo-eyes, and hinge parts locally, which means faster turnarounds and fewer second visits. If your gate opener gives you a flashing error code or simply will not budge, we can usually identify the failing part on the first trip and often have it on the truck. See our Gate Repair in Paterson coverage details here.
Common Gate Repair Problems We See in Paterson Homes
- Mortar-set hinge posts leaning and dropping the gate: Paterson’s brick rowhouses put gate posts into old masonry rather than concrete footings. Water seeps into the mortar, freezes, and the post heaves, twisting the gate and shearing hinges. We reset the post and rehang the gate so it stays put.
- Bottom rail and hinge rust in floodplain yards: Stands of water after heavy storms soak ground-mounted hardware in neighborhoods along the Passaic River. Rust moves fast once the paint is breached. We replace the corroded section and seal the new work.
- Operator failure after power surges or submersion: Control boards and battery backups fail when lightning hits the line or floodwater reaches the box. We diagnose the board, arm, and sensors, and replace only what died.
- Security gate jams on commercial storefronts: Roll-down gates jam from racked rails, snapped springs, or debris in the tracks, often at the worst possible time. We run overnight calls for Paterson businesses so a broken gate does not keep the shop closed.
Pricing for Gate Repair in Paterson, NJ
We Also Serve Cities Near Paterson
Our crews work throughout Passaic County and the surrounding area, including North Bergen, Union City, Newark, and Jersey City. If your gate is failing and you live just outside Paterson, call us and we will confirm the next available visit.
Serving Paterson, NJ - Our Local Coverage Area
We’re based in the Paterson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Paterson
Because the hinge post is almost certainly moving, not the hinges themselves. Most Paterson rowhouse gates hang from posts set in old brick piers with lime mortar, which crumbles, absorbs water, and heaves during freeze-thaw cycles. Rehanging the gate on the same moving post just repeats the problem. The post needs to be reset plumb in a concrete anchor before the gate is rehung. Call (626) 649-4572 and we will check the post first.
First, find the manual release. On most FAAC, BFT, and Linear swing and slide operators, there is a release handle or key on the motor housing or gearbox. Pull or turn it according to the manufacturer’s instructions, and the gate will unlatch from the drive so you can push it open or closed by hand. Do not force a gate that will not move freely, and do not force an operator that is mid-cycle, because that can shear gears. Before the next storm, we can show you exactly where your release is and test it with you, one of the small things we cover on any Paterson service visit.
Because the metal sits at or below the high-water level after storms, and once the paint barrier is breached the river-adjacent humidity keeps the corrosion moving. Solid steel sections rust through slowly, then fail suddenly when the remaining wall gets thin. The fix is cutting out the corroded section, welding in new steel, and sealing the work with a paint system rated for constant wet exposure, not just a quick rattle-can touch-up. We see this constantly in the Riverside and lower-lying sections of Paterson.
Yes. We answer calls around the clock and we keep overnight availability for commercial gate emergencies on Main Street, Market Street, and the surrounding business corridors in Paterson. When a roll-down gate locks a shop owner out at opening time, we treat it as a priority dispatch. Call (626) 649-4572, describe what the gate is doing, and a tech will be on the way.
Yes, if the gate crosses a walkway, driveway apron, or any place a child or pet can be, it needs a monitored safety device: photo-eyes that detect an obstruction in the gate’s path, an edge sensor that stops and reverses on contact, or both on a larger commercial slide gate. Paterson lots are compact, which means gates often swing over a public sidewalk or a shared side passage, and the safety margin matters more, not less. We test, align, and replace photo-eyes and edges on every automatic gate we service.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Paterson since our founding in 2009.