Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Orlando
Gate repair in Orlando comes with a set of conditions most cities never face. We’re talking about a place where afternoon lightning storms knock out control boards with regularity, where vacation rental turnover in communities like Champions Gate and Reunion Resort pushes gate operators through decades of normal wear in a single year, and where subtropical humidity works on iron hinges and posts year-round. Latch & Post Gate Repair has been handing these exact problems since 2009 as part of the Cedarwell family, and our Orlando crews know which brands hold up here and which ones don’t. If your gate is sagging, stuck, noisy, or dead, call (626) 649-4572 and you’ll get a written price before we touch anything.
Why Latch & Post Gate Repair Is Orlando’s Preferred Gate Repair Company
Homeowners around Orlando keep calling us back for a reason that shows up in the small details. We show up in uniform, we lay drop cloths on your floor before we step inside, and we put on shoe covers without being asked. When there are kids asleep or a nervous dog behind the door, we work quietly and ask before we move anything. Those are the Cedarwell C.A.R.E. values, and they’re not optional add-ons. They’re how every visit works, whether we’re replacing a LiftMaster board in Dr. Phillips or realigning a sagging iron gate in Baldwin Park.
Cody Beckman, who leads our Orlando team, has spent years helping homeowners figure out whether a gate is worth repairing or past saving. That’s the honest conversation most companies skip. We’ll tell you when a retrofit makes sense and when replacement is the cheaper answer over the next three years. And because every job is covered by the 365-Day Done Right Promise, if something isn’t right after we leave, we make it right. No argument about it.
Our office coordinates dispatch from Orlando, so when you call, you’re talking to someone who knows the area. A live person answers the phone 24 hours a day, every day. You won’t get a voicemail tree or a callback queue. You’ll get a straight answer about what we’re seeing in your neighborhood and when we can be there.
Commercial Gate Repair in Orlando
Commercial Gate Repair in Orlando is a different animal from what you’d find in a typical residential neighborhood, because so much of what looks residential here isn’t. Rental communities along the US-192 corridor near Walt Disney World, places like Champions Gate and Reunion Resort, run their entry gates around the clock. Guests check in and out at all hours. Delivery trucks, landscapers, and property managers cycle the gate constantly. A gate operator rated for 500 residential cycles per day can hit its full rated lifespan in under a year. That’s not a manufacturing defect. That’s just what happens when residential hardware gets commercial-duty workloads.
Most commercial gate repair jobs in Orlando fall into three buckets: control board replacement, motor replacement, and hinge or weld repair on the gate leaf itself. For commercial operators like DoorKing or Viking, a control board replacement typically runs $400 to $900 depending on the model, and a motor replacement usually lands between $600 and $1,400. If the gate leaf itself is sagging or the post is leaning, expect hinge and post work in the $350 to $900 range. Every quote is written and agreed before we start, so you know the number up front.
Operator Upgrades for High-Cycle Communities
Communities running hundreds of cycles per day often benefit from upgrading to a commercial-duty operator, which usually adds $200 to $500 over a residential model. The tradeoff is a motor and board that survive more than one rental season. We’ll show you the cycle count math for your specific property and let you decide whether the upgrade pays for itself.
Access Control and Exit Loops
Commercial gates often fail because of the access system, not the mechanical gate itself. Keypads, magnetic locks, and exit loop detectors wear out or get zapped by lightning. We service those components on DoorKing, Viking, and Linear systems, and we stock common local parts so we’re not waiting on a distributor for a week.
Iron Gate Repair in Orlando
Iron Gate Repair in Orlando is a year-round necessity, and the reason is the air itself. Inland, where the wind from the Gulf and Atlantic meets, humidity sits high for most of the year, and iron gates in neighborhoods like College Park and Audubon Park show rust perforation faster than gates in drier climates. The ornamental iron swing gates that dominate Orlando’s 1980s and 1990s HOA communities were often builder-grade to begin with. Thirty years of humid air later, the picket welds and hinge plates are the first places to fail.
We handle iron gate repair in stages. First, we assess whether the rust is surface-level or structural. Surface rust can be ground back, primed, and repainted. Structural rust, where the picket is thinned or the hinge has pulled from the post, usually needs welding and reinforcement. Standard iron gate rust repair in Orlando runs $200 to $600 for surface work and $500 to $1,200 when welding and reinforcement are needed. If the gate post itself is rotted or leaning at the base, expect post replacement in the $700 to $1,500 range depending on the footing work.
Hinge and Post Repair for Older Iron Gates
The hinge and post are where most iron gate problems actually begin. A gate that sags at the latch side usually isn’t a latch problem. The weight of the gate has worked against the top hinge for years, wallowing out the screw holes or bending the hinge plate itself. We repair that by re-bedding hinges with larger anchors, adding a steel backing plate where needed, and re-aligning the latch so it closes without being lifted or kicked.
Rust Repair Without Replacing the Whole Gate
You don’t always need a new gate just because rust shows up. We can cut out perforated sections, weld in new steel pickets, and match the paint so closely you won’t spot the repair from the street. It’s usually a third of the cost of a new gate, and we’ll tell you honestly when patching is throwing good money after bad.
Trusted Brands We Service in Orlando
We’re factory-trained on the operators Orlando homeowners and HOAs actually run: Linear, Viking, Ghost Controls, DoorKing, and others like LiftMaster, FAAC, BFT, Elite, and Mighty Mule. What that means for you is straightforward. We know the failure patterns on each board, we know which surge protectors hold up to Lightning Alley storms, and we stock common parts locally so a board swap doesn’t turn into a week-long wait. When a DoorKing operator at a Winter Park estate is down, you want someone who’s replaced two hundred of them, not someone learning the wiring diagram off their phone.
Common Gate Repair Problems We See in Orlando Homes
Every city has its own set of recurring failures. Here’s what we see week after week in Orlando:
- Control boards fried by lightning. Orlando sits in Lightning Alley, the highest ground-strike density corridor in the country. Summer afternoon storms send surges through gate operators that were never equipped with surge protection, and the board turns into an expensive paperweight. We add surge protectors on every replacement as standard practice.
- Premature motor failure in rental communities. In places like Champions Gate and Reunion Resort, a residential operator can reach its full cycle rating in under a year. The motor isn’t defective. It’s simply out of cycles. We recommend commercial-duty replacements for these properties.
- Rust and hinge fatigue on older ornamental iron gates. Decades of subtropical humidity have thinned the metal and worn the hinge points on gates throughout Orlando’s 1980s and 1990s HOA communities. The gate sags, the latch misses, and the homeowner assumes the whole gate needs replacing. It often doesn’t.
- Corrosion inside operator housings. Humidity doesn’t just attack the gate. Condensation forms inside the operator cabinet, corroding terminal connections and causing intermittent electrical failures that come and go unpredictably. We clean and re-terminate connections before concluding any board is dead.
Pricing for Gate Repair in Orlando, FL
Most gate repair calls in Orlando fall between $180 and $800, with the specific number driven by what’s actually broken. A standard hinge alignment or latch replacement runs $180 to $340. A control board replacement on a Linear or DoorKing operator typically runs $400 to $900 including parts. Motor replacements land between $600 and $1,400. Full iron gate rust repair with welding runs $500 to $1,200, and post replacement starts around $700. The number you’ll pay is the number on the written quote we hand you before any work begins. Call (626) 649-4572 for a free estimate, and we’ll walk the gate line with you so you understand exactly what’s being replaced and why.
We Also Serve Cities Near Orlando
Our Orlando crews also cover the surrounding metro: Winter Park, Maitland, Goldenrod, and Altamonte Springs. If your gate is down in any of those areas, the same Cedarwell Care Promise applies. One call to (626) 649-4572 gets you a written price, shoe covers, drop cloths, and a cleanup photo before we leave. It’s the same team that handles Gate Repair in Orlando, just dispatched a few miles north or east.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Orlando
They fail quickly because the cycle counts are commercial-grade while the hardware is residential. Communities like Champions Gate and Reunion Resort see guests, cleaners, delivery drivers, and property managers cycling the gate hundreds of times per day, which means an operator rated for 500 cycles daily can exhaust its lifetime in under a year. The fix is usually an upgrade to a commercial-duty operator, not another residential replacement. Call (626) 649-4572 and we’ll calculate the cycle count for your property and recommend the operator that actually fits the workload.
Orlando sits in Lightning Alley, the corridor with the highest ground lightning strike density in the United States, and summer storms routinely send surges into gate operators through the power and control wiring. Even a near-strike can take out a control board, which is why board replacement is a seasonal service call in this area rather than a rare failure. We install surge protectors on every board replacement as standard, and we recommend them on any new operator install here.
Yes, and the approach depends on whether the rust is surface-level or structural. Surface rust can be ground back, primed, and repainted for $200 to $600. Structural rust that has thinned the pickets or pulled the hinges from the post requires welding and reinforcement, typically $500 to $1,200. If the entire gate is rusted through at the bottom rail and the welds are failing, we’ll tell you honestly that replacement is the cheaper answer. A free estimate will show you the difference in writing.
Most sagging gates are a hinge and post problem, not a gate-leaf problem. The top hinge takes the lever force of the gate’s weight every day, and over years the mounting holes wallow out or the hinge plate bends, which drops the latch side and makes the gate miss the catch. We fix it by re-bedding the hinges with larger anchors, adding a backing plate if the post is hollow, and realigning the latch. If the post itself is leaning at the base, that’s a footing repair and we’ll scope it separately. Call (626) 649-4572 for an exact diagnosis.
Yes. We service commercial gate operators throughout the Orlando metro, including DoorKing, Viking, Linear, and LiftMaster commercial lines, and we routinely work on HOA entry gates, rental community gates, and business park gates from Winter Park to the US-192 corridor. Commercial board replacements run $400 to $900, motor replacements $600 to $1,400, and weld or hinge repairs $350 to $900. Every commercial job gets a written price before work starts, and the 365-Day Done Right Promise covers the work afterward.
If your gate is down in Orlando, call (626) 649-4572 now. A live person answers around the clock, and your estimate is free. We’ll send a background-checked, uniformed technician who treats your home the way we’d treat our own: shoe covers on, drop cloths down, and a photo of the clean-up before we leave.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Orlando since 2009.





Before
After
Before
After
Before
After