Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Maitland
Gate repair in Maitland usually comes down to one of three things: a rusted hinge post, a fried control board, or a gate that has simply sagged out of square. Most repairs on Lake Sybelia or Lake Lily properties run between $180 and $650 depending on what failed and which brand of operator you own. We answer calls from Maitland homeowners around the clock, and we schedule work without making you wait through a phone tree. Call (626) 649-4572 and a live person will pick up, day or night.
Maitland is different from Winter Park or Altamonte Springs in one specific way that matters for gates: the lakefront. Homes ringing Lake Maitland, Lake Sybelia, and Lake Lily sit close enough to open water that humidity is constant, lightning strikes are common, and wrought iron corrodes faster than it does even three blocks inland. That’s why we stock surge protectors and replacement control boards on our Maitland service vehicles instead of having to order them in.
Why Latch & Post Gate Repair Is Maitland’s Preferred Gate Repair Company
Latch & Post Gate Repair has been part of the Cedarwell family since 2009, and our focus has never drifted: we repair gates, install gates, and handle Maitland Electric Gate Repair. Not fences, not doors, not general handyman work. Every Maitland job gets a written price before we touch anything, and every technician arrives in uniform, background-checked, and trained on the brands families in this area actually own.
We’re the team Maitland HOAs call when a shared entry gate stops reading loop detectors or a resident’s keypad loses programming. The reason is unglamorous but real: we arrive when we say we will, we keep the work area clean, and our 365-Day Done Right Promise means if a repair isn’t right, we come back and make it right. No argument, no fine print.
You’ll also notice the C.A.R.E. routine on every visit. We put on shoe covers and lay drop cloths before stepping inside your home or garage. We ask before moving anything. We keep noise down if children are napping. And when the job is finished, we show you a photo of the clean-up before we leave. Cody Beckman, who leads our gate repair work, holds the team to that standard on every single job in Maitland.
Wrought Iron Gate Repair in Maitland
Wrought iron gate repair in Maitland is our most frequent service call on lakefront streets, and it almost always starts with corrosion at the hinge post. The constant humidity off Lake Maitland and Lake Sybelia works into the base of the post, rust blooms from the inside out, and gradually the gate begins to sag until it drags against the driveway or fails to latch. On Maitland’s ornamental iron gates we typically replace hinge post brackets, cut out corroded sections, weld in matching stock, and repaint with a finish rated for Central Florida UV exposure. A standard hinge post rebuild runs $320 to $580 depending on post condition and gate weight.
Hinge Post Rebuilds
When a wrought iron gate sags, the problem is rarely the gate leaf itself. It’s the post. In Maitland, where iron posts are set into concrete near irrigated landscaping, water constantly wicks into the base. We excavate around the post, cut out the rusted section, weld in a new steel core, and re-anchor the whole assembly. The gate is then re-hung and adjusted so it swings without binding. This is the difference between a patch job and a repair that holds for years.
Weld and Rust Repair
Rust on a Maitland lakefront gate is not cosmetic. Once it reaches the weld joints at the pickets or the bottom rail, the gate’s structural integrity is compromised. We grind back to clean steel, weld the joints solid, and apply a rust-inhibiting primer before the finish coat. We’ll also check the gate’s other weld points while we’re there, because if one joint corroded, the others are usually close behind.
Metal Gate Repair in Maitland
Metal gate repair in Maitland covers a lot of ground: aluminum driveway gates, steel entry gates, HOA community gates, and commercial-style vehicle gates at condo buildings. Aluminum doesn’t rust the way iron does, but it oxidizes, and its fasteners and hinges are still steel, so the hinge hardware fails just as often. On metal gates we replace worn hinges, correct sag, repair damaged rails, and realign the gate so the latch and the strike plate meet properly. Most metal gate repairs in Maitland run $220 to $520, and the written price you get before we start is the price you’ll pay when we finish.
Gate Realignment
A metal gate that drags, won’t latch, or has a visible gap at the top isn’t just annoying. It’s also putting strain on the hinges and the operator. We use a level and a tape to measure the gate’s drop, then adjust hinge placement and add or remove shims until the gate hangs square. On automated gates, realignment also reduces the load on the motor, which extends the life of the operator.
Hinge and Post Repair
On Maitland homes with aluminum gates, the most common failure we see is a hinge pin that has worn through its bushing from years of daily swings. We replace the pins, install new bushings or self-lubricating washers, and sometimes reinforce the post with an internal steel sleeve if the mounting holes have wallowed out. It’s quiet, unglamorous work, and it’s what keeps a gate from failing completely six months later.
Trusted Brands We Service in Maitland
Most Maitland homes with automated gates run one of a handful of brands: LiftMaster is common on residential swing gates, Viking and DoorKing show up frequently on HOA and lakefront estate entries, and Ghost Controls is popular with owners who want a simpler, quieter operator. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and our Maitland service vehicles carry the most common control boards, remotes, and safety sensors so we can fix most operators in a single visit instead of scheduling a follow-up. If you need Gate Repair service and you’re not sure which brand you own, take a photo of the operator and we’ll identify it when you call.
Common Gate Repair Problems We See in Maitland Homes
- Lightning-fried control boards on lakefront operators. Automated gate operators are often the tallest metal object near the lake edge, and Central Florida summer storms find them. We replace the board, then recommend and install a surge protector retrofit so the next strike doesn’t cost another board. The surge protector is a fraction of the price of a second board replacement.
- Humidity-driven hinge corrosion on ornamental iron. The constant moisture off Lake Sybelia and Lake Lily eats hinge pins and post bases from the inside. By the time a gate sags visibly, the post has usually been corroding for a year or more. We treat this as a structural repair, not a tightening job.
- HOA entry system faults that lock out dozens of residents. A single failed loop detector, safety photocell, or keypad on a shared gate can disable access for an entire community. We coordinate with Maitland management companies to repair shared systems quickly and keep residents informed while the work is underway.
- Worn hinge bushings on daily-use driveway gates. In Maitland’s established inland neighborhoods, where mid-century ranch homes have had driveway gates for decades, the hinges simply wear out from tens of thousands of open-and-close cycles. New bushings and hinge pins restore the original swing and take the strain off the operator motor.
Pricing for Gate Repair in Maitland, FL
Here’s what Maitland homeowners can expect to pay. Hinge pin and bushing replacement on a standard wrought iron gate runs $180 to $340. A full hinge post rebuild on a lakefront gate, including welding and re-anchoring, runs $320 to $580. Control board replacement on a LiftMaster, Viking, or DoorKing operator runs $250 to $450, and we’ll always include the surge protector retrofit recommendation at the same visit. Gate realignment runs $180 to $380, and weld repair runs $200 to $450 depending on how many joints need work. No numbers change after the quote: we give you a written price before any work begins, and you approve it before we touch the gate. Call (626) 649-4572 for a free estimate on any of this, and a live person will answer.
We Also Serve Cities Near Maitland
Our Gate Repair in Maitland coverage extends to the communities around Lake Maitland and Lake Sybelia, and we regularly work in Winter Park, Altamonte Springs, Casselberry, and Orlando. If you live in one of those cities and you are searching for gate repair, the same team, the same written pricing, and the same 365-Day Done Right Promise apply. Call us and we’ll schedule a time that fits your day.
Serving Maitland, FL - Our Local Coverage Area
We’re based in the Maitland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Maitland
Yes. Maitland’s identity as “The City of Lakes” means a large share of homes sit within a few hundred feet of year-round open water, and the humidity off Lake Maitland, Lake Sybelia, and Lake Lily accelerates rust and hinge corrosion on metal gates measurably faster than in landlocked suburbs like Casselberry or Altamonte Springs. Lakefront gate operators are also more likely to take a lightning strike, since they’re often the tallest metal object near the shore. Homeowners on Maitland’s lakefront streets should expect to replace control boards and hinge hardware more frequently, and should strongly consider a surge protector retrofit for any automated gate operator. Call us at (626) 649-4572 if your gate sits near the water and you want an honest assessment of its condition.
First, check the breaker and the GFCI outlet the operator plugs into, then unplug the operator for 30 seconds and plug it back in. If the gate still doesn’t respond, the control board has likely been fried by a voltage spike from a nearby lightning strike, which is common on Maitland lakefront properties. Don’t force the gate open manually if it’s connected to an operator, you can damage the gear train, and don’t open the operator housing if you’re not trained, because capacitors inside can hold a charge. Instead, call us at (626) 649-4572. We replace LiftMaster, Viking, DoorKing, FAAC, and BFT control boards, and we’ll install a surge protector during the same visit so the replacement board isn’t vulnerable to the next storm.
Yes. We work with Maitland HOAs and management companies on shared entry gates all year, and the usual culprit is a failed loop detector, a misaligned safety photocell, or a worn hinge that’s preventing the gate from closing fully. We coordinate with the property manager to schedule the repair, and we stage the work so the gate can be manually held open during the repair instead of fully locked down. Most shared gate repairs in Maitland are completed in a single visit, and we’ll provide a written report with photos for the HOA’s records. Call (626) 649-4572 and ask for Cody Beckman regarding HOA gate work.
Because the problem is not the hinge screws. On Maitland lakefront homes, water from high humidity and irrigation wicks up into the base of the hinge post, and the steel core rusts and expands from the inside, which slowly weakens its ability to hold the gate’s weight. Tightening hinge bolts does nothing to fix a rusted post core. The proper repair is a hinge post rebuild: we cut out the corroded section, weld in a new steel core, re-anchor the post, and then re-hang the gate so it sits square. Until those Maitland posts are rebuilt, the gate will keep sagging no matter how often the hinges are tightened. Call (626) 649-4572 and we’ll give you a written quote for the rebuild.
Yes. We install solar gate openers for Maitland homeowners whose gates sit far from the house or whose electrical service has been unreliable during storm season. Ghost Controls and Mighty Mule both make solar-compatible swing gate operators that work well on Maitland’s residential gates, and we size the panel and battery for the gate’s weight and daily cycle count. The system runs on DC power and is not affected by the voltage spikes that hit AC-powered operators during lightning storms, which is a real advantage on lakefront property. Call us at (626) 649-4572 and we’ll walk you through the options and give you a written price before any work starts.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Maitland since 2009.