Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Galveston
Gate repair in Galveston usually costs between $180 and $1,400 depending on the job, and most repairs are completed in a single visit. We work on automated and manual gates across the island, from the East End to the west end beach cottages. If your gate won’t open, sags against the latch post, or has rusted hinges that grind, call us at (626) 649-4572 and we’ll give you a written price before any work starts.
Galveston is different from every other Texas market we work in. The salt air and humidity attack gate hardware around the clock, and the sandy soil under pier-and-beam homes doesn’t hold posts the way solid clay does inland. Our crews know the failure patterns here: corroded hinge pins, rust-jacked lag bolts, operators thrown off by storm-bent frames. You’re not calling for generic gate work. You’re calling because the Gulf is eating your gate, and we know how to slow that down.
Every job starts with a straight answer on price. We write it down before touching anything. We lay drop cloths on your floors, we wear shoe covers inside, and we send you a photo of the cleanup before we leave. Your gate gets fixed. Your house stays clean. Those two things are not separate promises. They’re the same job.
Key Takeaways
- Most Galveston gate repairs run $180 to $1,400, with the price in writing before any work begins.
- Salt corrosion here attacks hinges, springs, and operator motors three to five times faster than in Houston.
- Historic district rules in the East End and Silk Stocking often require repair and re-coating, not replacement.
- We service LiftMaster, FAAC, BFT, Viking, Linear, Ghost Controls, DoorKing, Elite, and Mighty Mule operators.
- Our 365-Day Done Right Promise covers every repair: if it isn’t right, we make it right.
Why Latch & Post Gate Repair Is Galveston’s Preferred Gate Repair Company
We’ve been part of the Galveston gate repair landscape long enough to know what the island’s air does to metal. Latch & Post Gate Repair has operated since 2009 as part of the Cedarwell family of independently run gate specialists, and our Gate Repair team is factory-trained on the brands Galveston homeowners actually own. LiftMaster, FAAC, BFT, Viking, Linear, Ghost Controls, DoorKing, Elite, Mighty Mule. If your gate has a nameplate, odds are we know that unit.
Our customers on the island call us for two reasons more than any others. First, we answer the phone with a live person, 24 hours a day, every day. No voicemail, no callback queue at 2 AM when a storm has twisted your gate off its hinges and your dog is loose in the yard. Second, our technicians show up in uniform, background-checked, and they follow the Cedarwell C.A.R.E. values to the letter: clean up like it’s their own home, ask before they move anything, respect quiet hours when kids are asleep, and explain the price before any work happens.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. We don’t install roofs. We don’t pour driveways. We fix gates, replace gates, and handle our Electric Gate Repair in Galveston. That focus is why a Galveston homeowner in the East End gets the same careful, specific service as a beach-cottage owner on the west end. Same written price. Same cleanup photo. Same 365-Day Done Right Promise.
Driveway Gate Repair in Galveston
Driveway gate repair in Galveston typically runs $250 to $900, with the exact number in writing before we start. The job here is rarely a simple hinge swap. On the island, we’re usually resetting a leaning post, replacing rust-jacked lag bolts, re-aligning a frame that a storm nudged out of square, and re-coating hardware so it survives more than a couple of years in the salt air. Galveston’s wind load on solid infill gates is the hidden factor: a gate that holds fine on a calm day can twist a quarter-inch out of alignment during a sustained 40 mph onshore blow, and that quarter-inch becomes a latch that won’t catch and a motor that strains against the frame.
The manual release on your operator matters more in Galveston than anywhere else. During a power cut, you need to be able to open the gate by hand without fighting the motor. Most operators have a release handle or key. Ours do. We make sure your release works and we’ll show you where it is before we leave.
If your driveway gate is sagging but the panel looks fine, the problem is usually below the surface. The ground-level post on a pier-and-beam home sits in sandy, flood-zone soil that saturates and shifts. The post leans. The gate follows. Fixing it properly means digging the footing, resetting it, and often adding a deeper pour so it holds through the next storm season. That’s not a 20-minute hardware swap. That’s half a day of careful work, and it’s priced honestly for what it is.
Post Reset and Footing Work
We reset gate posts in Galveston regularly because the soil doesn’t hold like it does 50 miles north in Houston. The fix is a deeper footing, a plumb post, and hardware that’s rated for coastal exposure. You’ll get the price before we dig, and the hole gets filled back in level when we’re done.
Gate Realignment After Storms
Post-storm wind and surge debris bend frames and knock operators off track. We straighten what’s straightenable, re-weld what needs welding, and realign the gate so it swings true and latches without you having to heave it shut with your hip.
Gate Welding in Galveston
Gate welding in Galveston is a regular call because the salt air corrodes welds first. A welded joint fails at the same place corrosion starts: where two pieces of metal meet and trapped moisture does its slow work. We weld gate frames, hinge seams, and cracked posts, then re-coat them so the repair doesn’t start rusting the moment we pull away. Most weld jobs on the island run between $150 and $500 depending on the extent of the damage and how much prep the corrosion has created.
If you live in the East End or Silk Stocking Historic District, welding matters for a different reason. The Historic Preservation Committee often prohibits replacing ornate cast-iron gates with aluminum or vinyl. Your options are repair and re-coat, or nothing. Welding skill becomes the difference between a gate that survives another decade and one that rusts through at the hinge line.
We welded a gate on a pier-and-beam cottage in the East End where the owner had been told by another shop to replace the whole thing. The Historic Committee said no. So we welded the bent frame back straight, re-coated the cast iron, reset the hinge post in the sandy soil, and realigned the LiftMaster operator so the gate ran true. The owner still has her original gate. That’s the job most mainland gate crews never get asked to do.
Rust Repair and Re-Coating
Rust repair on a Galveston gate isn’t cosmetic. It’s structural triage. We grind back the corrosion, weld in new material where needed, then treat and coat the surface so the salt doesn’t undo the work in 12 months.
Weld Failure at Hinge Joints
Hinge welds fail here more than anywhere because the weld point is a natural moisture trap. If your gate leans and the hinge has cracked, a bolt-on replacement hinge will fail the same way eventually. We weld it properly, then protect the weld.
Trusted Brands We Service in Galveston
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers almost every automatic gate system installed on the island over the last 20 years. We keep common parts stocked for Galveston customers so a failed circuit board or a seized FAAC arm doesn’t mean waiting two weeks for a part to ship. In practice, most repairs are done same visit. Some older Viking and BFT units need a specific control board we may have to order, and we’ll tell you that before you’re committed to anything.
Common Gate Repair Problems We See in Galveston Homes
- Salt corrosion on hinge pins and springs. Galveston’s Gulf air rusts gate hardware three to five times faster than Houston’s inland humidity. Hinges seize, springs snap, and the gate starts dragging. Replacing hardware with marine-grade materials and a proper coating slows the cycle, but it never stops it completely.
- Leaning posts in sandy, flood-zone soil. Elevated pier-and-beam homes near the bay side and west end often have gate posts that were never set deep enough for the soil they sit in. The post shifts, the gate sags, and the latch stops lining up. We dig the footing, reset the post, and often go deeper than the original to hold through the next storm season.
- Storm-bent frames and knocked-out openers. After a hurricane or strong frontal passage, entire neighborhoods have gates that won’t align. Wind and debris bend frames, shear hinge pins, and throw operators off their mounts. This is acute, island-wide damage that comes in waves, and we handle it one house at a time until every latch catches again.
- Historic gate deterioration under preservation rules. In the East End and Silk Stocking districts, cast-iron gates are part of the house’s protected character. When the metal rusts, you often can’t replace it with modern materials. The repair is weld, re-coat, and match the existing finish as closely as possible. We’ve done enough of these to know the committee’s expectations.
Pricing for Gate Repair in Galveston, TX
Here are straight numbers for Galveston, not vague ranges pulled from a national chart. A standard gate-latch replacement runs between $180 and $320. A hinge repair with re-coating runs $150 to $400 depending on how many hinges and how bad the corrosion is. A complete driveway gate repair, including post reset and realignment, typically falls between $450 and $900. A welded frame repair runs $150 to $500. And a full automatic gate operator replacement, depending on the brand and model, runs between $800 and $1,400 installed. The bigger cost driver on Galveston is always corrosion: how much metal is left, not how much hardware needs swapping.
You get a written price before any work begins. No estimate given over the phone that changes when the truck pulls up. We look at your gate, we tell you what it costs, you decide. If you don’t want the work, you owe us nothing. That’s the Cedarwell Care Promise, and it applies to every single visit.
We Also Serve Cities Near Galveston
Our crews cover the Galveston area including Gate Repair in Galveston and the nearby communities of Texas City, La Marque, Hitchcock, and Dickinson. If you’re just off the island on the mainland side, the same written price and cleanup promise applies. Call us at (626) 649-4572 and we’ll get you scheduled.
Serving Galveston, TX - Our Local Coverage Area
We’re based in the Galveston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Galveston
Galveston’s salt-laden Gulf air and high humidity create corrosion rates three to five times faster than what you’d experience 50 miles inland in Houston. The salt spray gets into every hinge pin, lag bolt, and weld seam, and it never really dries out. Regular recoating and marine-grade hardware are the only way to slow it down, and even then you’ll be re-coating every few years. Call (626) 649-4572 if you want us to assess how much life your current gate has left.
The post is almost always the problem. In Galveston, ground-level posts on pier-and-beam homes sit in sandy, flood-zone soil that saturates during heavy rain and shifts, so the post leans even when the gate panel and hardware are sound. We dig out the footing, reset the post plumb, and often pour a deeper footing than the original. The repair is in the ground, not on the gate.
In the East End and Silk Stocking Historic Districts, the Historic Preservation Committee often prohibits replacing original ornate cast-iron gates with modern materials like aluminum or vinyl. You may not have the option to swap. We repair, weld, and re-coat the iron instead. Outside the historic districts, replacement is usually allowed, and we’ll tell you the difference in cost and lifespan before you choose.
Your operator has a manual release handle or key that disengages the motor from the gate arm, letting you push the gate open by hand. On LiftMaster and FAAC units, you’ll typically find it on the side or bottom of the operator housing. We show every Galveston customer where their release is and how to use it during our visit, because power cuts during hurricane season are going to happen. If your release is rusted or stuck, call us before you need it.
Yes. Automatic gate operators installed after current safety standards went into effect are required to have entrapment protection, which means photo-eye sensors or contact edges that stop or reverse the gate if something is in the path. That something is often a kid or a dog. If your operator is missing sensors or they’re not functioning, we’ll tell you what needs to happen and what it costs. The safety of your family is not a upsell.
Need a gate fixed on Galveston? Call us at (626) 649-4572. A live person answers, day or night. We’ll give you a written price, fix the gate, clean up after ourselves, and back the work with the 365-Day Done Right Promise. If it isn’t right, we make it right. That’s the whole deal.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Galveston since joining the Cedarwell family in 2009.