Gate Repair in Texas City - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Repair Across Texas City

A gate that won’t open, sags on its hinges, or trips its breaker mid-cycle is a problem you feel every time you come home. In Texas City, we fix that fast. Most gate repairs here run between $180 and $480 for common mechanical fixes, with full operator replacements landing between $850 and $2,600 depending on the opener and the gate’s size. You’ll see the exact number in writing before we touch anything. Call (626) 649-4572 and a live person answers, day or night.

Call (626) 649-4572

We know this city’s gates because we know this city’s conditions. Salt air off Galveston Bay, refinery particulates drifting from the Dike corridor, standing stormwater after a hurricane – all of it lands on your gate hardware before it lands anywhere else. Our Gate Repair team works on the equipment Texas City families and facility managers actually run, from 1950s ornamental iron swing gates in Skyline to heavy slide gates on acreage along Highway 146.

Why Latch & Post Gate Repair Is Texas City’s Preferred Gate Repair Company

Latch & Post is part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been at this since 2009. Cody Beckman leads our operation, and the standard he set is simple: every gate comes down to two parts – the latch that holds it and the post that carries it. That’s the job we focus on.

Texas City homeowners call us because we name the price before we start, lay drop cloths and put on shoe covers before we step inside, and send a cleanup photo before we leave. Nobody wants a technician tracking refinery dust across the living room. We protect your floors the same way we’d protect our own. Our techs are background-checked, uniformed, and factory-trained on the brands families around here actually own.

When a Skyline homeowner’s 1950s iron swing gate dropped and started dragging concrete, our tech found the original hinge post footing rotted out from decades of salt and chemical exposure. We replaced the footing and corrected the sag properly, not just patched the panel. That’s the difference between a fix that lasts and a callback waiting to happen. For Gate Repair in Texas City, that local knowledge matters.

Iron Gate Repair in Texas City

Iron Gate Repair in Texas City usually means rescuing an older ornamental gate whose original hardware has been corroding since the Eisenhower administration. Much of the residential stock in Skyline and Highland Terrace was rebuilt after the 1947 disaster, and those post-war ranch homes often have driveway gates with hinge posts, pickets, and latch assemblies that salt and chemical particulates have been eating for 50 or 60 years. A typical iron gate repair here runs $160-$420, with full hinge post re-footing landing between $350 and $800.

Sag Correction and Re-Footing

A sagging iron gate in Texas City is rarely just a hinge adjustment. The real problem is usually the footing – the concrete base under the hinge post that Galveston Bay salt air and refinery drift have crumbled over decades. We dig out the rotted footing, pour a new base, and reset the post plumb before we touch the panel. Then we rehang the gate so it swings clean and latches without dragging.

Latch and Lock Repair

The latch is the part you touch every day, and it’s usually the first thing to fail. We rebuild frozen latch assemblies, replace worn strike plates, and match new keypads or lock sets to the gate’s existing holes so you’re not drilling new ones into old iron. Most latch work finishes in one visit.

Sliding Gate Repair in Texas City

Sliding Gate Repair in Texas City handles the canilever and track-riding gates that dominate the city’s industrial perimeter and the wider residential lots out toward Bacliff. Refinery-corridor particulates pit galvanized and powder-coated finishes on these gates, which means rollers and tracks bind well before their normal service life. A standard sliding gate repair runs $200-$550, and a full track rebuild or rack-and-pinion replacement lands between $600 and $1,400.

Roller, Track, and Rack Binding

When a slide gate grinds or shudders instead of gliding, the cause is almost always corrosion on the track or pitting in the rack. We clean or replace the rollers, wire-brush the track, and reset the rack so the motor isn’t fighting its own hardware. In Texas City, this is a routine job we see every week.

Wide Driveway and Farm Gate Operators

A 16-foot or 20-foot farm gate out on a long rural driveway needs an operator built for weight and wind. We install and repair heavy-duty sliding operators sized to the gate’s actual span, not the next size down that struggles and burns out its board inside two years. Where mains power is a long, flood-prone run, we pair the operator with a solar panel and a battery bank that holds through storm season.

Trusted Brands We Service in Texas City

We’re factory-trained on Linear, Viking, Ghost Controls, and DoorKing, plus the other major brands Texas City homes and facilities already have installed. That means the right fix happens on the first visit because we know the controller logic, the limit switch setup, and the common failure points for each brand. We keep common parts in stock for fast turnaround, so you’re not waiting a week for a control board to ship. When we quote a repair, the price is written and agreed before any work begins.

Common Gate Repair Problems We See in Texas City Homes

• Salt and chemical seizure on hinge hardware. Hinges, springs, and rollers that would last a decade in Katy can seize up in Texas City in two or three years. We replace with marine-grade or sealed hardware wherever it makes sense.
• Sag correction that needs a new footing, not just a hinge adjustment. Original 1950s-1970s iron gate posts in Skyline and Highland Terrace have corroded for decades below the soil line. Re-footing the post is the only fix that holds.
• Operator boards fried by standing floodwater. Hurricane storm surge and standing water submerge gate operators and underground conduit runs. We install flood-rated enclosures and corrosion-resistant wiring after every major storm season.
• Wide farm gates that the operator can’t handle. A gate that’s 16 feet or wider needs a motor sized for span and weight. Undersized operators burn out boards, trip breakers, and leave you with a gate stuck halfway open.

Pricing for Gate Repair in Texas City, TX

We Also Serve Cities Near Texas City

Our Texas City schedule covers the surrounding communities too. We run calls in La Marque, Hitchcock, Dickinson, and Bacliff on the same routes we work Texas City, so response times stay tight and we know the gates in each spot. If you’re just over the city line, call us – chances are we’re already scheduling nearby.

FAQs About Gate Repair in Texas City