Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Five Corners
Gate repair in Five Corners comes down to two problems you’ll see again and again here: rotted or heaved hinge posts, and operators undersized for wide acreage gates. We fix both, usually in one visit. Our Gate Repair team works throughout Five Corners, from the neighborhoods off Northeast 119th Street to the longer driveway runs where solar power makes more sense than pulling mains. Pricing is written down before any work starts, and your call goes to a live person any hour of the day or night. Call (626) 649-4572 for a free estimate.
Why Latch & Post Gate Repair Is Five Corners’s Preferred Gate Repair Company
Latch & Post Gate Repair has focused on one thing since 2009: gates. Not fences, not decks, not general handyman work. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on.
Five Corners homeowners call us because we understand the county rules here. Clark County jurisdiction changes what needs a permit and what doesn’t, and that’s the kind of detail a general contractor from across the river might miss. Our technicians are background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values on every visit: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside. Your floors stay clean. We even send a photo of the cleanup before the technician leaves, so you can see what was done without walking the property yourself.
Response time to Five Corners is typically same-day or next-day for hinge and latch failures. We stock parts locally for the brands families in this area actually own, so a Viking opener or a Ghost Controls operator doesn’t sit waiting on a warehouse shipment.
Wood Gate Repair in Five Corners
Wood gate repair in Five Corners almost always starts at the hinge post, not the gate panel. The roughly 45 inches of annual rain and persistently wet winters saturate the soil at the post base, and the contractor-grade pressure-treated posts from the late 1990s and 2000s tract-home buildout are now hitting the 20-to-25-year failure window at the same time. We remove the rotted section or the entire post, set a properly deep footing with good drainage, and rehang the gate with hardware that won’t seize in Pacific Northwest moisture.
Post Footing Replacement
Shallow footings from the original build heave out of plumb when the ground saturates and freezes. A gate that sagged six inches last winter will sag again every winter unless the post is reset deeper. We dig below the frost line, pour a proper footing, and set the post plumb before the gate ever gets rehung.
Hardware Upgrades
The steel hinges and latches installed in the 1990s and 2000s were basic contractor grade. They oxidize, bind, and eventually snap. We replace them with heavy-duty hardware sized for the gate’s actual weight and width, including wide farm-style swing gates that were often hung on hardware meant for a narrow pedestrian gate. Most standard gate latch replacements in Five Corners run between $180 and $320, and a full hinge post reset with new hardware typically lands between $450 and $850. You’ll see the exact number in writing before we touch anything.
Driveway Gate Repair in Five Corners
Driveway gate repair in Five Corners often means a wide swing or slide gate that was paired with an undersized operator at installation. Long driveway runs here make mains power impractical in many cases, so solar operators are common, and solar means the operator has to work harder with less power. We check the operator’s rated capacity against the actual gate weight, rework the hinge points, and replace operators that were never strong enough for the span.
Solar Operator Retrofit
Where mains power is impractical at the end of a long driveway, a solar opener with a battery backup and a safety photocell is the most sensible setup. We size the panel to the operator’s draw and the gate’s cycle count, not just to what fits the mounting post. Adding an automatic gate opener in unincorporated Clark County can trigger a county permit and electrical inspection, which surprises a lot of Five Corners residents. We flag that before any motorized project begins so there are no surprises from the county later.
Operator Replacement
A gate operator that struggles, groans, or trips its own breaker is telling you something. On wide acreage gates, that something is often an overloaded motor burning itself out against a gate it was never rated to move. We replace the operator with one matched to the gate’s span and weight, and we rework the hinge post if it’s no longer carrying the load the way it should. Operator replacement on a standard driveway gate in Five Corners typically runs $700 to $1,400 depending on the span and the brand. Wider farm gates cost more, and you’ll get the written number up front.
Trusted Brands We Service in Five Corners
Our technicians are factory-trained on the gate operator and hardware brands Five Corners homeowners actually run: Viking, Ghost Controls, DoorKing, and Elite are the ones we see most on acreage gates around here, and we keep common replacement parts for those brands stocked locally. That means a Viking control board or a Ghost Controls arm doesn’t wait on a distributor shipment. We also service LiftMaster, FAAC, BFT, Linear, and Mighty Mule equipment, so whatever is on your post, our Gate Repair in Five Corners team can get the right fix on the first visit.
Common Gate Repair Problems We See in Five Corners Homes
- Rotted hinge posts heaved out of plumb. Saturated winter soil and shallow 1990s footings work together to push posts out of alignment. The gate panel itself is often fine; the post is the failure point.
- Seized contractor-grade steel hardware. The original hinges, latches, and rack and pinion components on 20-to-25-year-old tract-home gates oxidize in the damp and bind until something breaks.
- Wide acreage gates overloading undersized operators. Long driveways and solar power mean operators are often undersized for the span, and the motor works itself to death against a gate it can’t properly move.
- Slow or non-closing automatic gates. Photocell misalignment, dying batteries on solar systems, and worn rack teeth all show up as a gate that stops halfway or refuses to close at all.
Pricing for Gate Repair in Five Corners, WA
Here’s what gate repair in Five Corners actually costs. Standard latch replacements run $180 to $320. Hinge post resets with new heavy-duty hardware land between $450 and $850. Operator replacement on a standard driveway gate runs $700 to $1,400, and wide farm-style gates cost more because the hardware and operator have to be sized to the span. Every price is written down and agreed to before any work starts, so the number on the invoice is the number you already approved. Call (626) 649-4572 for a free estimate on your specific gate, and you’ll get the exact figure before we do anything.
We Also Serve Cities Near Five Corners
Latch & Post Gate Repair serves Five Corners and the surrounding area including Seattle, Spokane, Tacoma, and Vancouver, WA. If your property is just outside Five Corners, call us anyway. We can tell you quickly whether we cover your specific address and get you scheduled.
Serving Five Corners, WA - Our Local Coverage Area
We’re based in the Five Corners area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Five Corners
Yes, in many cases you do. Five Corners is unincorporated Clark County, and adding an automatic gate opener can trigger a county permit and electrical inspection even when the gate itself already exists. This catches a lot of homeowners off guard because City of Vancouver residents don’t face the same requirement. We flag the permit question before any motorized work begins, so call (626) 649-4572 and we’ll tell you what your specific project needs.
Because the hinge post has lost its footing, usually from saturated soil heaving the shallow concrete footing out of plumb. The post leans, the gate drops at the latch side, and it looks like the panel is bent when it isn’t. The fix is a new deep footing and a plumb post, not a new gate.
On the long driveway runs and acreage entrances where running conduit from the house to the gate costs more than the operator itself. Solar operators with battery backup are the standard solution there, and we size the panel to the gate’s actual cycle count rather than just bolting on whatever fits.
Viking, Ghost Controls, DoorKing, and Elite are the brands we see most on Five Corners acreage gates, and we stock common parts for those locally. We also service LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Call (626) 649-4572 to confirm your specific model.
Washington code requires automatic gate operators to have functioning safety devices, including photocells or contact edges, that reverse the gate when something is in the path. If your photocells are misaligned, bypassed, or missing, the gate is not compliant. We test them on every automatic gate repair visit and bring them back to code as part of the work.
If your gate is sagging, seizing, or refusing to open, call Latch & Post Gate Repair at (626) 649-4572. A live person answers around the clock, and you’ll get a written price before any work begins. Every repair carries the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Five Corners since 2009.





Before
After
Before
After
Before
After