Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Clovis
Most gate failures we see in Clovis are not what homeowners expect. In northeast subdivisions like Loma Vista and Harlan Ranch, the wide 10 to 12 ft RV gate panel slowly levers its hinge post outward over five to eight years, until the gate binds and refuses to close. The hardware is often fine. The post footing is not. That distinction matters because if you replace the hinges on an out-of-plumb post, the gate will sag again within months. We know Clovis’s gate profile because we’ve been working on it since 2009, and we’ll tell you the truth about what’s actually failing before we touch a single bolt. Call (626) 649-4572 and a live person answers, 24 hours a day.
Why Latch & Post Gate Repair Is Clovis’s Preferred Gate Repair Company
We’re not a general handyman service. Latch & Post Gate Repair is a Cedarwell-family gate specialist, founded in 2009, and our entire focus is gates: repair, installation, and electric gate work. Homeowners in Clovis consistently tell us the same three things. They want a straight price before the work starts, they want a crew that doesn’t leave a mess, and they want the gate fixed so it doesn’t fail again in a season. That’s why every visit includes a written quote, shoe covers and drop cloths inside the home, and a photo of the clean-up before our technician leaves. We also back every repair with the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print. Cody Beckman leads our team, and our technicians are background-checked, uniformed, and factory-trained on the brands Clovis families actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Wrought Iron Gate Repair in Clovis
Gate Repair on wrought iron in Clovis means dealing with a specific set of problems: San Joaquin Valley heat bakes powder coating until it micro-cracks, then Tule fog from December through February pushes moisture into those cracks and accelerates rust on hinges, rollers, and latch hardware. A standard wrought iron hinge pin replacement in Clovis runs $120 to $260, while a complete hinge assembly rebuild with rust treatment and re-coating typically lands between $280 and $650 depending on panel weight and access. We’ll always quote the exact number in writing before any work begins.
Hinge Post Reset for Wrought Iron Gates
The chronic failure on Clovis wrought iron gates is not the iron itself. It’s the post. Heavy panels on 6,000 to 9,000 sq ft lots with wide side returns gradually pull the post out of plumb. We excavate the footing, reset the post in new concrete, re-hang the panel, and the gate closes clean again.
Rust Treatment and Weld Repair
Once powder coat cracks from UV exposure, rust sets in fast along the bottom rail and hinge welds. We grind back the corrosion, reinforce the weld if needed, and re-coat with a finish matched to your HOA’s approved color. Clovis HOAs often require exact finish matching, so we photograph the existing color and confirm before we apply anything.
Metal Gate Repair in Clovis
Metal Gate Repair in Clovis covers the full range of powder-coated steel, aluminum, and ornamental steel gates that dominate the city’s planned subdivisions built between 1985 and 2015. The dominant repair category here is the oversized side-yard RV gate, which often spans 10 to 12 feet as a single panel. That unsupported span puts enormous leverage on the hinge-side post, which is why a typical post reset and re-hang job for a metal RV gate in Clovis runs $350 to $800. Simple metal latch replacement starts around $95, while a full double-swing gate realignment with new hinges runs $300 to $550.
Gate Realignment and Latch Repair
When a metal gate drags across the driveway or pops its latch on the return swing, the panel or the post has moved. We measure the gap at the top and bottom hinge, check the post with a level, and correct whichever is off. Straightening the panel is temporary if the post is leaning; we fix the footing instead.
Powder Coating Repair and Weather Sealing
Clovis summers push 108 to 112 degrees. That heat, repeated every year, breaks down powder coating faster than in coastal climates. We sand, prime, and match-coat the damaged sections, then seal the weather gaps so winter fog doesn’t creep into the frame and cause hidden rust.
Trusted Brands We Service in Clovis
Our technicians are factory-trained on the equipment families in Clovis actually run, including Linear, Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, BFT, and Elite. We keep common control boards, safety sensors, and remote transmitters on hand so many Clovis repairs are completed the same day we arrive, without a week-long wait for a part to ship. If your gate operator was installed by a builder or an HOA contractor, there’s a good chance the brand is one we already know well. And because Clovis HOAs often mandate a specific operator model for shared entry systems, matching the existing equipment matters more here than in older cities without those rules. We carry what’s needed.
Common Gate Repair Problems We See in Clovis Homes
- Hinge post lean on wide RV gates. In northeast Clovis, a 12-foot unsupported panel slowly levers the post outward over five to eight years. The gate binds and won’t latch, but the hinges are often still serviceable. The real fix is a post footing reset in new concrete.
- Rust from the heat-to-fog cycle. Summer heat dries and micro-cracks powder coat, then Tule fog delivers months of sustained moisture. Hinges, rollers, and latch hardware rust fast in this cycle, especially on the bottom rail where water pools.
- Operator motor burnout from binding gates. A LiftMaster or Linear operator that fights a dragging gate burns out motors well before their rated lifespan. Replacing the motor without fixing the binding gate means replacing the motor again in a year or two.
- HOA approval delays on matching gate replacements. Many Clovis HOAs require architectural review before a gate panel can be replaced with a different material, height, or finish. A failing gate can sit un-repaired while the committee reviews photos and specs, so we help you prepare the submission packet.
Pricing for Gate Repair in Clovis, CA
Here’s what Clovis homeowners can expect to pay, based on the jobs we complete in this area:
| Repair Type | Typical Range in Clovis |
|---|---|
| Latch or lock replacement | $95-$220 |
| Hinge replacement (single gate) | $120-$260 |
| Post reset with new concrete footing | $350-$800 |
| Full gate realignment (double-swing RV gate) | $300-$550 |
| Gate operator replacement (motor and board) | $450-$1,200 |
| Weld and rust repair with re-coating | $280-$650 |
These are what we actually charge in Clovis, and the written quote you receive before any work starts will show the exact figure for your gate. No pressure, no surprises. Estimates are free.
We Also Serve Cities Near Clovis
Clovis is one of many Central Valley cities we work in. We regularly serve Fresno, Sanger, Fowler, and Madera with the same written-price, clean-up, and 365-Day Done Right Promise that Clovis homeowners get on every visit. If you’re a few minutes outside the city line, call and ask. Same crews, same standards.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Clovis
Most Clovis HOAs need three things: a photo of the existing gate, a description of the proposed repair or replacement that matches the existing material and finish, and a product spec sheet if you’re replacing the gate or operator. We can prepare the spec and photo package for you, and for repair work that restores the gate to its original condition, many HOAs don’t require any submission at all. Your management company’s architectural committee can clarify, and we’re happy to help you draft the request. Call (626) 649-4572 and we’ll walk you through it.
The hinge post is leaning, not the hinges. On a 10 to 12 ft single-panel RV gate, the panel weight acts as a lever on the post, pulling it gradually outward. Replacing hinges on an out-of-plumb post is a temporary fix that fails again in months. The lasting repair is to pull the gate, excavate the post footing, reset the post in new concrete, and re-hang the panel. In northeast Clovis, we do this repair more than any other single job.
Summer heat stresses operator motors, and Tule fog rusts the hardware. A gate operator already working against a binding gate will burn out its motor in a season or two rather than the seven or eight years the manufacturer rates it for. The fix sequence matters: correct the gate alignment first, then replace the operator if it’s already compromised. Skipping the alignment step is how you end up paying for the same motor twice.
The management company typically holds the service contract, but a single technician does the actual work. We coordinate directly with your Clovis HOA manager: we assess the gate, give the manager a written quote, and schedule the repair around resident access needs. For shared gates, we also note safety photocell and loop detector alignment so the management company’s records stay current. If your community gate is down, call us and we’ll contact the manager for authorization.
Yes. Entrapment protection is a UL 325 safety requirement, and if the photocells or safety edge are misaligned, a closing gate won’t reverse when it meets a person, a child, or a pet. Clovis gates often sit on wide driveways where a misaligned sensor isn’t noticeable until it fails to reverse. We always verify the safety circuit as part of any automatic gate repair, and the check is included in the written quote, not an add-on. Call (626) 649-4572 and a live person answers, any hour.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Clovis since 2009 through the Cedarwell family of gate specialists.