Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Antelope
Gate repair in Antelope usually costs between $185 and $520 for a standard latch, hinge, or realignment job, and between $850 and $2,400 when an electric operator or control board needs replacement. Most repairs we handle in Antelope are done the same week, and we always hand you a written price before any work starts. Cody Beckman leads our team, and we’ve been repairing gates in this area since 2009 as part of the Cedarwell family of independently owned gate specialists. If your gate is sagging off a worn hinge post or an HOA entry operator won’t reverse, call (626) 649-4572 and a live person will answer around the clock.
Why Latch & Post Gate Repair Is Antelope’s Preferred Gate Repair Company
Antelope is a planned suburban community that grew fast between 1988 and 1998, and that single construction window shapes almost every gate repair call we take here. The neighborhoods around Antelope Road, Don Julio Boulevard, and Walerga Road are dense with HOA-governed subdivisions whose ornamental steel and wrought iron entry gates were hung at the same time by a handful of regional developers. That means one failing operator usually signals that every panel on that street is on the same wear curve.
We know that when an Antelope HOA board calls about a gate that won’t close, the concern is not just the mechanism. It’s the liability of an unsecured pool enclosure, a fire lane left open, or a sidewalk gap where kids wait for the school bus. Our technicians are background-checked and uniformed, and they work to the Cedarwell C.A.R.E. values: they ask before moving or touching anything, explain the price before the work, and leave floors and walkways cleaner than they found them. Shoe covers and drop cloths are standard on every visit, not an add-on.
We handle Gate Repair for individual homeowners and for association boards across Antelope. Scheduling is coordinated from our Sacramento office, and our crews serve Antelope neighborhoods directly. When a live person answers your call at (626) 649-4572 at 11 p.m., that’s us, not an answering service.
Wrought Iron Gate Repair in Antelope
Wrought iron gate repair in Antelope most often means addressing what decades of Sacramento Valley heat have done to the frame and hinges. A typical hinge-post correction or panel realignment runs $185 to $395, and welding a cracked wrought iron scroll or frame joint runs $220 to $520 depending on how much material has fatigued.
Straightening a Sagging Iron Panel
Iron gates on original 1988-1998 footings settle as the concrete below shifts through wet winters and dry summers. When a panel drags on the driveway or won’t latch, we lift it back to square, shim and reseat the hinge post, and check that every picket is still carrying its share of the load. If the post has shifted beyond correction, we talk through the option of setting a new footing to current depth standards before anything is cut or welded.
Repairing Rust-Compromised Ironwork
Antelope’s dry heat bakes off protective coatings, and the tule fog that settles in during winter brings sustained moisture straight to the bare steel. Wrought iron that loses its finish rusts at the joints first, because that’s where water sits. We grind back the rust, weld in new material where sections have thinned, then prime and repaint so the repair blends into the original lines.
Metal Gate Repair in Antelope
Metal gate repair in Antelope covers the tubular steel and ornamental aluminum gates that were installed in the same late-80s and 90s building wave as the wrought iron work. Most metal gate-latch and hinge repairs here run $175 to $360, while replacing a bent or welded-in steel frame section runs $240 to $480.
Fixing Gates That Were Never Squared
Tubular steel gates expand and contract through Antelope’s 100°F-plus summer days and 40-degree winter mornings. That thermal cycling slowly twists frames out of plane, which is why a gate that closed cleanly in March starts catching in August. We correct the twist, reset the hinges, and when the original post was simply set too shallow, we discuss the cost of a properly embedded replacement before the gate is hung back on it.
Replacing Worn Rollers and Track Hardware
Many Antelope side-yard gates are sliding panels that ride on rollers installed when the house was built. The grease in those rollers bakes out under summer heat, and the bearing surfaces wear into flats that grind and jump. New rollers, fresh track hardware, and a check of the panel’s balance usually bring a sliding gate back to two-finger operation. Our techs stock common roller sizes for the brands found across Antelope’s subdivisions, so the repair usually happens in one visit.
Trusted Brands We Service in Antelope
Our technicians are factory-trained on the equipment families still own around Antelope: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The important part for Antelope customers is that we keep parts for the legacy LiftMaster and Linear operators that dominate this area’s HOA entry systems. When an obsolete control board fails, waiting on a backordered part can leave a community entrance open for weeks. We carry the retrofit boards and loop detector parts most commonly needed across the Antelope Road and Don Julio Boulevard corridors, which usually gets the gate moving again on the first visit rather than the third.
Common Gate Repair Problems We See in Antelope Homes
- Obsolete control boards cooked by heat. Legacy LiftMaster and Linear boards used across Antelope’s 1990s-built subdivisions degrade from UV and sustained 100°F-plus summers. The board often fails before the operator motor ever shows wear, which makes the repair cheaper than replacing an entire operator but only if the correct retrofit board is available.
- Hinge-post settlement on undersized footings. The original posts for many residential gates here were set before modern frost-and-settlement standards were adopted. After 25 to 35 years of clay soil movement, a gate that hung level now drags or won’t latch, and the fix starts at the post, not the hinge.
- Thermal warping of steel frames. Summer expansion and winter contraction bend tubular and wrought iron frames by a few degrees each year. Weld seams are the first to crack when the frame flexes, which is why a gate that looks straight from the street still rattles and catches at the latch.
- Tule fog rusting exposed hardware. Gates that bake through summer without coating maintenance develop micro-fissures in the paint. Antelope’s winter fog parks moisture in those fissures for weeks. Hinges, latches, and the lower rail are where the rust shows first, and where we repair most.
Pricing for Gate Repair in Antelope, CA
Here’s what you can expect in Antelope. Standard latch or hinge repair runs $175 to $360. Gate realignment on a settled post runs $185 to $395. Weld repairs on a cracked frame or broken picket run $220 to $520. Electric gate repair work, which includes diagnosing a dead operator, replacing a control board, or fixing a loop detector, runs $850 to $2,400 depending on the operator model and whether the failing part is still manufactured. You’ll see the exact number in writing before any work begins, and that written price is always included, never a surprise. Call (626) 649-4572 for a free estimate, and we’ll tell you honestly whether the gate should be repaired or whether replacement is the less expensive answer.
We Also Serve Cities Near Antelope
Our Gate Repair in Antelope coverage extends naturally into the neighboring communities. We regularly serve North Highlands, Elverta, Rio Linda, and Citrus Heights, and because those areas share Antelope’s housing age and climate, we see the same legacy operators and the same post-footing problems. If you’re just over the line, call us, and a live person will sort out scheduling before the call ends.
Serving Antelope, CA - Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Antelope
Most legacy LiftMaster and Linear operators installed in Antelope subdivisions can be retrofitted with current control boards and loop detectors rather than being replaced entirely, and a retrofit typically costs less than a full operator swap. We make that call based on the condition of the motor, the arm, and the frame itself, and we’ll put both prices in writing before the board authorizes either path. Call (626) 649-4572 and Cody or another of our technicians will walk you through what your specific operator supports.
Yes, and that’s the pattern we see across Antelope because so many communities were built in the same 1988 to 1998 window by the same regional developers. When one operator’s control board fails, the other gates in that subdivision are usually within a year or two of the same failure. We can inspect the remaining operators and loop detectors in a single visit, and that inspection often costs less than a second emergency call later.
Heat expansion and original post settlement are the two usual causes. Antelope’s 100°F-plus summer days make the steel frame expand and soften the gate’s geometry, which shows up first as a sagging swing panel that drags on the drive or misses the latch. If the post under the hinge side has also settled over decades of clay soil movement, the sag gets worse every year. We correct the alignment at the hinge post and then check the post itself, because straightening a gate on a moving post only lasts until the next heat wave.
They are, and they hit in sequence. The dry 100°F-plus summers bake grease out of hinges and rollers, degrade UV-exposed control boards, and crack protective coatings on steel and iron. Then winter tule fog moves in and parks moisture on the exposed metal for weeks, rusting exactly the hardware that lost its coating in August. Yearly lubrication and finish touch-ups can slow the cycle, but most Antelope hardware reaches a repair-or-replace decision between ages 25 and 35, right where the original gates now sit.
Yes. UL 325 is the federal safety standard that governs automatic gate operators, and any operator we install or retrofit in Antelope must meet its current entrapment-protection requirements, including monitored safety edges, photo eyes, or other listed devices. When we replace an obsolete board on an older Antelope HOA gate, we bring the operator up to current UL 325 compliance as part of the retrofit. If you’re not sure whether your community’s gates are compliant, call (626) 649-4572 and we’ll tell you what we look for, free.
If your gate is dragging, refusing to latch, or an operator is behaving like it’s 1997, call (626) 649-4572. A live person answers, we’ll give you a written price before any work starts, and every repair is covered by our 365-Day Done Right Promise. Serving Antelope’s neighborhoods from Don Julio Boulevard to Elverta Road, we’ll get your gate square, quiet, and closing the way it should.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Antelope since 2009.