Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Alamo
Gate repair in Alamo usually means one of three things: a heavy estate gate that’s sagging or dragging, an electric operator that stopped responding, or a hinge post that shifted after a Diablo wind night. We handle all three, and we give you a written price before any work starts. Call (626) 649-4572 and a live person answers, day or night.
Most Alamo driveways hold 16-to-20-foot gate openings built to clear horse trailers and hay trucks. That’s wider than the torque rating on nearly every residential swing operator sold today. A technician who doesn’t know that will quote the wrong hardware and leave you with a gate that fails in a year. We know the difference, because we work these properties every week.
Why Latch & Post Gate Repair Is Alamo’s Preferred Gate Repair Company
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and we’ve done it since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. No general handyman work, no guesswork on equipment we don’t know. Just gates.
Our technicians are background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values on every visit: clean up like it’s our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside. Your floors stay clean, and we send you a photo of the clean-up before we leave.
We service the brands Alamo families actually own: FAAC, BFT, Linear, Viking, LiftMaster, and DoorKing. That matters because an estate gate operator installed in the 1990s doesn’t behave like a new residential unit, and the right fix on the first visit depends on a technician who has seen the board fail the way yours did.
Every repair and installation is covered by the 365-Day Done Right Promise. If the work isn’t right, we make it right. No argument, no fine print.
Wood Gate Repair in Alamo
Wood gate repair in Alamo usually involves a custom cedar or redwood panel on a pipe-rail or wrought-iron frame, and the failure point is almost never the wood itself. It’s the post beneath it. On the one-acre horse properties off Stone Valley Road and along Danville Boulevard, hinge posts were often set decades ago without concrete footings deep enough for the panel weight. Over 20 or 30 years, the post leans, the gate drags, and the operator strains until it burns out. Most standard wood gate repairs in Alamo run $220-$480 depending on whether we’re re-hanging the panel, replacing the hinges, or re-setting the post.
Hinge and Post Re-Set Work
When a wood gate drags, the fix isn’t adjusting the panel. It’s digging out the old post, setting a new one deeper with concrete, and re-hanging the panel on stainless hinges rated for the load. We do this on estate properties across Alamo where the original post was undersized from the start.
Rotted Post Replacement
Cedar posts rot at the soil line after enough wet winters, and a rotted post can’t hold a heavy gate. We replace it with a pressure-treated or steel post, set in concrete, and match the existing panel so the gate looks like it always did. You’ll see the exact price in writing before we dig.
Driveway Gate Repair in Alamo
Driveway gate repair in Alamo is different from most other Bay Area cities because the gate openings here are wider and heavier. A 16-to-20-foot dual swing gate built for a horse trailer weighs more than a standard residential operator is rated to move, and Diablo wind gusts torque the panels enough to knock paired operators out of sync in a single night. We see it after every strong wind event. Typical driveway gate repair in Alamo runs $280-$650 for realignment, operator re-homing, or hinge replacement, and $450-$1,100 when the control board or drive motor on an older Viking or DoorKing unit is the problem.
Dual Swing Operator Sync
When a dual swing gate falls out of sync, the two leaves fight each other at the center stop and one motor overworks until it fails. We re-time the operators, check the hinge posts for settlement, and replace the rack and pinion drives when a tooth has jumped under torque.
Solar Battery Replacement
Alamo’s summers push past 100°F, and sealed lead-acid batteries in solar gate openers degrade faster than manufacturers rate them for. If your gate runs on solar and it’s dead on a drive with no AC run, the battery is usually the first thing we check. We stock replacements for the brands we service.
Trusted Brands We Service in Alamo
We’re factory-trained on the equipment Alamo properties actually run: FAAC, BFT, Linear, Viking, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common boards, arms, and hinge hardware stocked for these brands so a repair doesn’t stall waiting on parts. When an older Viking Access or early LiftMaster commercial unit fails at the board or drive motor, we can usually source the replacement same week and install it in one visit. Our Gate Repair team handles every brand we list, every time.
Common Gate Repair Problems We See in Alamo Homes
- Diablo wind torque on dual swing gates. One strong wind night can push a heavy wrought-iron panel hard enough to knock the paired operators out of sync. The leaves then bind at the center stop and the motors overheat until they trip.
- Settled hinge posts on estate properties. Homes built between the 1960s and early 1990s often had posts set without deep enough concrete footings. After decades, the post leans away from the panel and the gate drags or won’t latch.
- Solar battery failure in 100°F summers. Alamo’s inland heat degrades sealed lead-acid batteries years earlier than the manufacturer rating. Driveways with no AC run are the most common call for a dead operator in July and August.
- Knox key switch compliance. Contra Costa County Fire Protection District requires Knox key switches on automated gates controlling private driveways. Every operator upgrade or replacement we do includes checking that the switch is present and working, because fire access can’t wait.
Pricing for Gate Repair in Alamo, CA
A standard gate-latch replacement in Alamo runs $120-$240. Hinge replacement on a heavy estate gate runs $180-$420 depending on the panel weight. Electric gate repair where the board or drive motor is the issue sits between $450 and $1,100 for the brands we service. Solar battery replacement runs $150-$350 per battery, and re-setting a settled hinge post on a large driveway gate starts around $500 and goes up with the digging involved.
What changes the price is the gate opening width, the panel material, and whether the post needs to be re-set or just re-hung. We give you the written price before any work starts, every visit. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Alamo
Our Gate Repair in Alamo teams cover the surrounding San Ramon Valley too. We serve Walnut Creek, Moraga, Lafayette, and Danville with the same written-price, shoe-covers, cleanup-photo routine we bring to Alamo. If you’re just over the line, call and we’ll schedule you in.
Serving Alamo, CA - Our Local Coverage Area
We’re based in the Alamo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Alamo
It’s usually the post. Alamo hinge posts were often set without deep enough concrete footings, and after 20 to 30 years the post leans away from the panel. The gate drags on the ground, the operator strains, and eventually the motor burns out. We diagnose it on site and show you what’s actually moving before we quote anything.
Call for a written inspection quote.
Alamo’s summers regularly push above 100°F, and sealed lead-acid batteries in solar openers degrade faster than manufacturers rate them for. A battery rated for three to five years may last eighteen months here. If your gate runs on solar and it’s dead, the battery is the first thing to test, and we stock replacements for FAAC, BFT, Linear, and Viking systems.
Call for a solar battery check.
Yes. Contra Costa County Fire Protection District requires Knox key switches on any automated gate controlling a private driveway. Fire crews can’t wait for a gate to open. Every operator replacement or upgrade we do includes checking the Knox switch, and if yours is missing or seized we’ll quote adding it.
Confirm your gate’s compliance today.
Yes, and this is one of the most common calls we get after wind events. We re-time the operators, check the hinge posts for settlement, and replace rack and pinion drives when a tooth has jumped. On a one-acre horse property off Stone Valley Road, a 20-foot dual swing running an older Viking Access kept slipping out of sync; our tech found the pivot-side hinge post had settled away from the panel and a drive had jumped a tooth under the torque. We re-set the post on a deeper footing with stainless anchors, replaced the galvanized pivot hinges with stainless, and re-homed the operator arm. The gate has cycled clean through two subsequent wind events.
Call to schedule a realignment.
No. Alamo driveways built for horse trailers and hay trucks are 16 to 20 feet wide, and standard residential swing operators are rated for 10 to 12 feet. An undersized operator will burn out within a year. We quote the right hardware for the opening width and panel weight, and the written price reflects that before we start.
Call for an honest operator sizing.
Contact Latch & Post Gate Repair in Alamo
If your gate is dragging, dead, out of sync, or just not latching right, call (626) 649-4572. A live person answers 24 hours a day, 7 days a week. We’ll schedule a visit, explain the price before any work starts, and leave your property cleaner than we found it. Written estimate, shoe covers, drop cloths, and a cleanup photo are included every time, and every job is backed by the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Alamo since 2009.