Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Moraga
Gate repair in Moraga usually costs between $180 and $840 depending on what failed, and most jobs are finished in one visit. If your gate is sagging, dragging, or stuck halfway open on a hillside driveway off Rheem Boulevard or Moraga Way, you want a technician who knows this town’s older gates and steep grades. We serve the Lamorinda area from our San Francisco Bay Area office, and our crews know every road in Moraga. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Moraga’s Preferred Gate Repair Company
Most of the gates we work on in Moraga were hung in the 1980s and 1990s, when this town built out its large-lot ranch homes and custom hillside estates. Those gates are now 25 to 40 years old. The control boards predate modern safety requirements, the hinge posts have been through three decades of clay-soil movement, and the operators are frequently original equipment. We know what that means because we see it on a weekly basis from Sanders Ranch to Rheem Valley to Camino Pablo.
Our Gate Repair team is factory-trained on the brands Moraga households actually own: LiftMaster, Viking, Ghost Controls, DoorKing, Elite, FAAC, BFT, Linear, and Mighty Mule. Every technician is background-checked and uniformed. Every visit includes a written price before work starts, shoe covers and drop cloths inside the home, and a photo of the cleanup before we leave.
We’re led by Cody Beckman, and every job carries the 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fine print.
Sliding Gate Repair in Moraga
Sliding Gate Repair in Moraga is one of our most common calls because so many driveways here climb a grade and use a slide gate instead of a swing gate. A typical slide-gate tune-up in Moraga runs $220-$380, and that usually includes track realignment, roller or bearing replacement, and cleaning out whatever the oak trees dropped in the track. If the operator itself has failed, expect $540-$840 for a replacement with modern safety photocells.
Track Clearing and Debris Guard Installation
Every October and November, valley oaks drop dense loads of acorns and leaf debris directly into slide-gate ground tracks across Moraga. That trips the obstruction sensors and makes the gate reverse for no obvious reason. Our crews can clear the track, adjust the sensor sensitivity, and install debris guards that keep the worst of it out between cleanings.
Slope-Rated Hardware for Hillside Driveways
Many Moraga slide gates were hung with flatland hardware, and they bind under the rack and pinion as the driveway climbs. We replace those with slope-rated or cantilever slide-gate hardware that handles the grade without dragging. Most slope-corrected track-and-hardware replacements in Moraga run $480-$700.
Wrought Iron Gate Repair in Moraga
Wrought Iron Gate Repair in Moraga often means cutting out rusted lower rails on a gate that’s been through 30 years of tule fog winters and 100-degree summers. Resealing a rusted lower section and repainting the repair runs $260-$420. If the hinge posts have shifted on a sloped driveway, expect to add $150-$250 for post realignment and bolt replacement.
Hinge and Post Reset on Sloped Drives
Wrought iron gates on Moraga’s hillside properties tend to sag at the hinge post as clay soil expands and contracts through the year. We reset the post, replace worn barrel hinges, and square the gate so it latches cleanly. This is not a job to ignore; a dragging gate eventually fails at the post footing.
Rust Repair and Repainting
Moraga’s winter fog settles in this valley and sits against ironwork for hours every morning. We grind out the rust, weld in fresh steel where the lower rail has thinned, and repaint with an industrial primer and topcoat. You’ll see the exact cost in writing before we touch the gate.
Trusted Brands We Service in Moraga
We stock local parts for the brands Moraga homeowners actually run, so you’re not waiting a week for a control board to ship. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Viking operator is dead or your Ghost Controls keypad stopped reading the code, we usually have the part on the truck or at our Bay Area office the same day. We don’t push a replacement when a repair is the honest answer, and we tell you upfront when a 30-year-old board isn’t worth fixing.
Common Gate Repair Problems We See in Moraga Homes
- Obsolete control boards without UL 325 entrapment protection. Most 1980s and 1990s operators in Moraga predate modern safety standards, and many cannot be retrofitted with safety photocells. That matters here specifically because the Moraga-Orinda Fire District requires compliant safety provisions on automated driveway gates in hillside estates.
- Warped and cracked wood gates from extreme thermal cycling. Moraga’s enclosed valley traps summer heat regularly topping 95 to 100 degrees, then pools cold, damp tule fog in winter. That cycle warps wood gates and strips fasteners out of hinge posts faster than in Orinda or Lafayette, where the marine air moderates the temperature swing.
- Sloped driveway gates sagging at the hinge post. Gates hung on grades off Rheem Boulevard or Camino Pablo bind under gravity. Without slope-rated hardware, the correction doesn’t hold, and repeated sag eventually breaks the post footing.
- Acorn and leaf debris jamming slide-gate tracks every fall. It’s the most predictable seasonal service call in Moraga. The obstruction sensors can’t tell the difference between a child and a pile of acorns, so the gate reverses mid-travel.
Pricing for Gate Repair in Moraga, CA
Gate repair pricing in Moraga runs $180 at the low end for a simple latch or hinge adjustment, and $840 at the high end for a full operator replacement on a hillside automated gate. Here’s the honest breakdown:
- Latch and lock repair: $180-$280
- Hinge and post reset: $250-$400
- Track realignment and roller replacement: $220-$380
- Wrought iron rust repair and repaint: $260-$420
- Operator replacement with safety photocells: $540-$840
- Fire-district compliance retrofit (Knox Box, battery backup): $320-$520
Every price is quoted and agreed in writing before any work starts. We don’t start the truck until you’ve seen the number and said yes. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Moraga
Gate Repair in Moraga keeps us busy, but our crews also cover the surrounding Lamorinda and East Bay communities. If you’re in Orinda, Walnut Creek, Lafayette, or Alamo, the same care routine applies: written price first, shoe covers inside, cleanup photo before we leave.
Serving Moraga, CA - Our Local Coverage Area
We’re based in the Moraga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Moraga
In most cases, a full replacement is the cheaper and safer answer. Control boards from the 1980s and early 1990s often lack UL 325 entrapment protection, and they typically cannot be retrofitted with modern safety photocells. The Moraga-Orinda Fire District requires compliant safety provisions on automated driveway gates in the High Fire Hazard Severity Zone, which covers all of Moraga. If your operator predates these rules, we’ll show you the board, explain what can and can’t be added, and give you a written price for a modern LiftMaster or DoorKing unit with safety photocells, a Knox Box key switch, and battery backup. Call (626) 649-4572 for an exact quote; estimates are free.
It’s the heat-and-fog cycle. Moraga’s valley traps 95 to 100-degree heat in summer, which makes metal expand and wood warp, then winter tule fog pools cold damp air that shrinks the material back and loosens fasteners. On a sloped driveway, gravity does the rest. We correct the sag by resetting the hinge post and, where the grade requires it, installing slope-rated hardware. Call us before the post footing fails; that’s a much bigger repair.
Yes, if your property sits on a hillside estate with an automated driveway gate in Moraga’s High Fire Hazard Severity Zone. The Moraga-Orinda Fire District requires Knox Box key switches, battery backup for power outages, and minimum clear-width for fire apparatus. Thousands of gates installed in the 1980s and 1990s predate these rules. We can add a Knox Box switch and battery backup to most existing operators, and we’ll quote the exact retrofit cost before any work begins.
Acorns. Moraga’s valley oaks drop dense loads of acorns and leaf debris directly into slide-gate ground tracks every October and November, and the obstruction sensors trip because they can’t tell debris from an obstacle. We clear the track, adjust the sensor sensitivity, and install debris guards that reduce how often this happens. A quarterly track cleaning contract handles the rest, and we can set that up on the same visit.
Yes, and it’s one of the more satisfying repairs we do in Moraga because the fix actually holds once it’s done right. We reset the hinge post, replace worn barrel hinges, square the gate, and address any rust at the lower rail. On grades, we use slope-rated hardware so the gate doesn’t sag again in the next heat wave. You’ll get a written price before we start.
Don’t Wait Until the Gate Won’t Open
Moraga’s fire code didn’t exist when most of these gates went in. If your automated gate dates to the 1980s or 1990s, it may not meet current emergency access requirements, and that’s a real compliance issue, not a cosmetic one. We explain what you have, what it needs, and what it costs. Then you decide. Call (626) 649-4572 and a live person will answer, any time, day or night.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Moraga and the Lamorinda area since 2009.