Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across West Park
Gate installation in West Park typically runs $1,400 to $6,800 depending on whether you need a new swing gate hung on existing posts, a full sliding gate with track work, or a complete driveway system with automation and safety edges. Most West Park jobs take one to two days on site, and you’ll get a written price before we touch anything. We serve every neighborhood in West Park, from the streets off Pembroke Road down toward Miami Gardens Drive, and our crews know the older CBS homes here well. Call (626) 649-4572 for a free estimate, and a live person answers around the clock.
Why Latch & Post Gate Repair Is West Park’s Preferred Gate Installation Company
West Park homeowners call us for Gate Repair in West Park because we understand what’s actually behind the gates here. A lot of the ornamental iron swing gates in this city were hung in the 1980s and 1990s, before West Park even incorporated in 2005. That means the work often sits on older county-era footings and wiring that current code treats differently than work in Hollywood or Hallandale Beach. We’ve walked enough of these properties to know the difference between a hinge that can be re-packed and a post footing that has to come out.
Our Gate Installation team works under the Cedarwell C.A.R.E. values, and that shows up in ways families notice. We put down drop cloths before stepping inside, we put on shoe covers, and we photograph the cleanup before we leave. If your kids are napping, we use quiet tools and we ask before moving anything in the yard. Cody Beckman leads the crew, and every technician is background-checked, uniformed, and trained on Viking, DoorKing, and Ghost Controls systems among others.
West Park’s flat, low-lying terrain means rainwater ponds around gate tracks and motors after summer storms. We see the corrosion that causes, and we know what to spec so the new install doesn’t fail the same way in three years. Every installation is covered by the 365-Day Done Right Promise. If it isn’t right, we make it right. No fine print.
Gate Opener Installation in West Park
Gate Opener Installation in West Park usually means retrofitting automation onto an existing gate, and that’s where this city’s history comes into play. A lot of West Park homes still have the original 1990s operator bolted to a 1960s iron frame. The old control boards in those units cannot accept modern entrapment-protection wiring, so swapping “just the opener” often turns into a bigger code discussion. In West Park, expect $1,100 to $2,800 for a single swing gate opener replacement with photo-eyes, and $2,400 to $4,500 when the control board, receiver, and safety edges all need upgrading.
Retrofit Automation on Older Iron Gates
We do this constantly on the CBS homes between Southwest 40th Avenue and State Road 7. The old ornamental iron gates are heavy, the posts may have settled, and the wiring is often undersized. We check the post footing before quoting an opener, because mounting a new Viking or DoorKing operator on a moving post means you’ll pay for the opener twice.
Every retrofit includes UL 325 photo-eye sensors on both sides of the gate path. That’s not an upsell. That’s Broward County requiring it whenever an older system is touched.
New Operator with Keypad and Intercom
West Park families with kids and dogs often want a keypad for the front pedestrian gate and an intercom at the driveway. Those add $600 to $1,900 depending on the panel and whether we’re running new low-voltage conduit through the yard. We’ll lay conduit along the fence line and bury it cleanly, and we’ll show you the written price for every line item before work starts.
Gate Fabrication in West Park
Gate Fabrication in West Park usually starts with a simple question: is the existing iron frame worth saving? On a 1960s CBS home west of Southwest 56th Avenue, a rusted swing gate with a settled hinge post and a mismatched 1990s operator is often cheaper to replace than to labor over. A new fabricated pedestrian gate for a West Park home runs $900 to $2,200. A full driveway swing or slide gate in aluminum or steel runs $2,800 to $6,800 installed, with automation priced separately if needed.
Replacing Settled Swing Gate Posts
West Park’s soil is flat, low, and holds water after storms. Concrete footings poured in the 1970s have shifted, and the gate sags at the hinge even after you tighten everything. We cut out the old footing, pour a proper base, and reset the post plumb. Then we hang the new gate so it closes square. This is the difference between a gate that lasts twelve years and one that starts sagging again in eighteen months.
Slide Gates for Narrow Driveways
Some West Park driveways are short and tight. A slide gate keeps the full driveway clear and doesn’t need swing arc room. We fabricate the frame to the exact opening, build the track on a concrete base that drains properly, and mount the operator inside a weather-rated housing. Design, fabrication, and install for a standard single slide gate here runs $3,200 to $5,900.
Trusted Brands We Service in West Park
We’re factory-trained on the brands West Park families actually have bolted to their gates: Viking, Ghost Controls, DoorKing, and Elite. We keep common control boards, safety edges, receivers, and remotes stocked locally so a replacement part doesn’t mean waiting a week for shipping. If your current system uses an older Ghost Controls board or a DoorKing operator that has been discontinued, we can usually source a compatible retrofit kit and have it installed fast. You’ll know the brand and the part number before we order anything.
Common Gate Installation Problems We See in West Park Homes
- Settled hinge posts from 1970s concrete. West Park’s low, flat lots hold water, and the original footings under older iron gates have shifted. The gate sags at the post, the latch no longer lines up, and tightening the hinges just pulls the post further out of plumb.
- Obsolete control boards on 1990s operators. A lot of the West Park homes built in the 1960s got automation added in the 1990s without an updated permit. Those boards have no entrapment protection wired in, and current Florida Building Code won’t let us leave that in place once we touch the system.
- Ponding water around slide tracks and motor housings. West Park sits on the Broward coastal plain, and after a summer storm, water settles around low gate tracks. That accelerates rust on rollers and bottom guides and shortens control board life. Drainage planning is part of every slide gate install we do here.
- Salt air corrosion on strike plates and hinges. Salt-laden Atlantic air reaches West Park from about five miles east, and it eats ornamental iron hardware year-round. We spec stainless or coated hardware on new installs, and we tell you what to do about the existing hinges if they’re still salvageable.
Pricing for Gate Installation in West Park, FL
A pedestrian gate fabrication and install in West Park runs $900 to $2,200. A new driveway swing gate with posts and hardware runs $2,800 to $4,800. A full sliding gate system with track, motor, photo-eyes, and a keypad runs $3,200 to $6,800. The variables are concrete work, the condition of the existing posts, how much low-voltage wiring needs to be pulled, and whether your old operator triggers a code upgrade. You’ll get a written quote before any work begins. That’s our rule in West Park, not a favor. Call (626) 649-4572 and we’ll come out, measure, and hand you a number. Free estimates, always.
We Also Serve Cities Near West Park
While this page is written for residents in and around West Park, our crews also handle Gate Installation work in Jacksonville, Miami, Tampa, and Orlando. If you’re in one of those cities, the same written-price rule and the same 365-Day Done Right Promise apply. The phone number is the same: (626) 649-4572.
Serving West Park, FL - Our Local Coverage Area
We’re based in the West Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in West Park
Usually not, and here’s why: West Park incorporated in 2005, so your 1980s gate was likely installed under old Broward County oversight or never permitted at all. Once we touch the operator, current Florida Building Code applies to the whole system, including photo-eyes and reversing edges. We’ll give you a written price for the full code-compliant retrofit rather than selling you a part that won’t pass inspection. Call (626) 649-4572 for a site look.
The problem is almost never the hinges on older West Park gates. It’s the post footing. Many of these homes had concrete footings poured in the 1970s, and in flat, low-lying soil that holds water, those footings settle. The post leans, the gate sags, and the hinges get blamed. We reset the post footing, and the sag goes away for good.
Yes. In Broward County, and specifically for West Park homes with pre-2005 county-era work, current code requires UL 325 entrapment protection on any automated gate we service or install. That means photo-eyes or a reversing edge, even if the old operator never had them. We won’t skip this, and we’ll show you exactly what it costs before starting.
It means your gate may have been permitted under Broward County rules that no longer match city standards. If work rises to the level of requiring a permit, we help you reconcile the old county-era installation against current code. This is routine in West Park but rarely comes up in places like Hallandale Beach or Hollywood, where incorporation happened much earlier and standards were city-managed for decades.
If the rust has eaten through the frame or the rollers have carved into the bottom track, replacement is almost always cheaper than repeated repairs. On a typical West Park CBS home, a new fabricated slide gate with fresh track, motor, and photo-eyes runs $3,200 to $5,900. We’ll assess the existing concrete and give you a straight answer on repair versus replace, in writing. Call (626) 649-4572 and we’ll come out free of charge.
Contact Latch & Post Gate Repair in West Park
If you live in West Park and you’ve been putting off a gate that sags, won’t close square, or has an operator that’s older than your kids, call us. We’ll send a uniformed technician who knocks before entering, puts on shoe covers, lays down drop cloths, and gives you a written price before any work begins. Every job is covered by the 365-Day Done Right Promise. Call (626) 649-4572 any time. A live person answers, day or night.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving West Park since 2009.