Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across University of California-Davis
Gate installation in University of California-Davis usually means one of two situations: a fence gate that’s been cycled to death by daily bike commuters, or a new gate where a tight lot and shared driveway leave no room for a swing arc. We handle both, and we quote a written price before any work starts. If you’re off the Davis alley system or along a bike path cut-through, call (626) 649-4572. A live person answers, day or night.
Davis is the Bicycle Capital of America, and that changes how gates are built here. A side gate in most cities opens a few times a week. In University of California-Davis, the same gate may open and close 40 times a day as cyclists cut through to backyard bike storage. That repetitive load, combined with summer heat above 100°F and winter tule fog, means ordinary swing gates and stock hardware fail fast. We spec slide gates, stainless fasteners, and reinforced post footings as the local standard, not an upsell.
Why Latch & Post Gate Repair Is University of California-Davis’s Preferred Gate Installation Company
We’re part of the Cedarwell family, and we’ve been doing gate repair and Gate Installation since 2009. Cody Beckman leads our crew, and every technician who shows up in University of California-Davis is background-checked, uniformed, and factory-trained on the operators families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means the right fix happens on the first visit, not the third.
Homeowners around Davis keep calling us back for a reason that has nothing to do with marketing. We lay drop cloths before we carry a single tool into your yard. We put on shoe covers before stepping inside. We ask before moving anything, and we show you a photo of the clean-up before we leave. If you’ve got a sleeping kid or a nervous dog, we’ll work around nap time and keep the gate area quiet.
Every job we do in University of California-Davis is covered by the 365-Day Done Right Promise. If the installation isn’t right, we make it right. No argument, no fine print. That’s the Cedarwell care standard, and it applies to every post we set on every block from the downtown core to the south bike corridors.
Gate Fabrication in University of California-Davis
Gate fabrication in University of California-Davis is where a stock gate won’t fit the space. Tight alley widths, shared driveways, and fence lines that run right up against a bike path all mean a standard swing gate either scrapes the fence or blocks the lane once the post settles. We fabricate the gate to the opening: sliding gates for tight side yards, double gates for wider rear access, and pedestrian gates sized to the existing fence line.
Sliding Gates for Tight Alley Access
A slide gate rides on a fabricated track instead of swinging into the alley or the bike path. In Davis, that’s often the only workable option for a rear entry gate along the alley system. We set a new post footing with a proper post anchor, fabricate the track to the gate weight, and use stainless hardware so winter rains don’t seize the rollers.
Custom Swing Gate Hardware on Reinforced Posts
When a swing gate does fit, the hinge post is everything. We never bolt hinges to an aging cedar post that’s been there since the 1970s. We dig a new post hole, pour a concrete footing, and add a wood backer board to the hinge mounts. That’s what keeps a gate from sagging within a year under Davis’s high-cycle bike traffic.
Automatic Gate Installation in University of California-Davis
Automatic gate installation in University of California-Davis is standard for driveway vehicle access around the student rental blocks and newer west Davis homes, and it’s increasingly requested for side gates that cyclists open and close dozens of times a day. A properly installed automatic operator takes the daily wear off the latch and hinge hardware, so the gate itself lasts longer. We install operators from FAAC, BFT, Linear, and Viking, and we size the motor to the gate’s cycle rate, not just its weight.
High-Cycle Operators for Daily Bike Traffic
A standard residential operator isn’t built for 40 open-close cycles a day. We spec high-cycle-rated motors and heavy-duty arms for Davis side gates, because that’s what actually lasts here. We also install the safety photocells and, where required, a vehicle loop detector so the gate meets UL 325 and doesn’t close on a cyclist or a car.
Pedestrian Access That Keeps Working During the Install
We never leave a rental property without a working pedestrian lane. If we’re replacing a swing gate with a slide gate near the Davis alley system, we set a temporary path so tenants and bikes can still get through while the work’s underway. The whole point is access. Cutting it off for a day defeats the purpose.
Trusted Brands We Service in University of California-Davis
We’re factory-trained on FAAC, BFT, Linear, and Viking operators, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in University of California-Davis because rental properties and student housing around campus often have whichever operator the previous owner or property manager bought on sale. We stock local parts for FAAC and Linear units, which cuts turnaround time on repair calls. When we install a new automatic gate, we recommend the brand that fits the gate weight, cycle rate, and power access: not whatever a chain store happens to have in stock.
Common Gate Installation Problems We See in University of California-Davis Homes
- Swing gates that scrape the fence or block the bike path. Tight Davis alley widths mean a swing arc that looks fine on paper binds once the post settles. We see this on almost every older rental block off the alley system, and the fix is usually a slide gate on a fabricated track.
- Hinge posts splitting at the base from repetitive use. Daily bike commuter traffic puts thousands of open-close cycles on a side gate each year. An aged cedar post wasn’t designed for that stress, and it splits. We replace the post and pour a new footing rather than bolting the hinge back onto cracked wood.
- Rusted or seized latches from Davis’s dry-summer/wet-winter cycle. Summer heat above 100°F dries and shrinks the wood. Winter rains swell it again and soak into uncoated steel hardware. Latches seize, hinge screws strip, and gate bottoms rot at grade. We use stainless or zinc-plated hardware and check the gate bottom clearance before we leave.
- Automatic gates without working safety sensors. Some installs skip the photocells or loop detector, which violates UL 325 and creates a real pinch hazard for cyclists and kids. We install safety devices on every automatic gate we build in University of California-Davis, and we test them before we call the job done.
Pricing for Gate Installation in University of California-Davis, CA
A standard pedestrian gate installation in University of California-Davis runs between $450 and $950, depending on gate width and whether we’re setting a new post footing or reusing a solid one. A fabricated sliding gate for a tight alley or driveway runs $1,800 to $3,800, including the track, new post, and stainless hardware. Automatic gate installation with a high-cycle operator from FAAC or Linear starts around $2,800 and goes to $5,500 with a vehicle loop detector and safety photocells. You’ll see the exact written price before we touch anything, and that number is what you pay. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near University of California-Davis
Our Gate Installation in University of California-Davis crew covers the immediate campus and alley neighborhoods, and we regularly take calls from Los Angeles, San Diego, San Jose, and San Francisco when a landlord or homeowner needs the same slide-gate and high-cycle expertise. Dispatch and scheduling are coordinated from our Los Angeles office; crews serve University of California-Davis locally.
Serving University of California-Davis, CA - Our Local Coverage Area
We’re based in the University of California-Davis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in University of California-Davis
Usually no, and that’s fine. A swing gate in a tight shared driveway near UC Davis will scrape the fence or block the bike path once the post settles, so we fabricate a sliding gate instead. The track mounts to the fence line and the gate rolls sideways, so you keep full driveway clearance. Call (626) 649-4572 and we’ll measure the opening and tell you straight what fits.
A high-cycle-rated operator from FAAC, Linear, or BFT is the right call for a side gate that opens 30 to 40 times a day in University of California-Davis. Standard residential operators are built for a few cycles a day and burn out under that load. We size the motor to the cycle rate and install safety photocells so the gate stops if a cyclist is in the way. Estimates are free at (626) 649-4572.
Because the last installer bolted hinges to the existing aging cedar post instead of setting a new footing. In University of California-Davis’s dry-summer/wet-winter climate, that old post swells, shrinks, and eventually splits under daily bike traffic. We set a new post in concrete and add a wood backer board to the hinge mounts, which is the only way to prevent the sag from coming back within a year. Call (626) 649-4572 and we’ll look at the post and quote a proper fix.
Yes, for vehicle access gates at UC Davis-area rental properties, a loop detector or an equivalent vehicle sensor is required under UL 325 safety standards. The detector tells the operator the car is clear so the gate doesn’t close on it. We install loop detectors and photocells on every automatic vehicle gate we build in University of California-Davis, and we test them before we leave. Call (626) 649-4572 for a free on-site quote.
Davis summers above 100°F dry and shrink wood, and winter tule fog plus rain swells it back and corrodes raw steel. That cycle destroys uncoated hinges, untreated post bases, and unpainted gate frames within a few years. We use stainless or zinc-plated hardware, treated lumber or steel at grade, and paint or powder coat on fabricated gates so the installation survives the full Davis cycle. Call (626) 649-4572 and we’ll spec the materials for your specific gate.
Call Latch & Post Gate Repair for Gate Installation in University of California-Davis
If your gate is sagging, scraping, or seizing up, or if you’re planning a new gate for a tight Davis alley or shared driveway, call us at (626) 649-4572. We’ll send a background-checked technician to measure, quote a written price before any work starts, and install a gate that’s built for how University of California-Davis actually lives. Free estimates, live person on the phone, and the 365-Day Done Right Promise on every job.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving University of California-Davis since 2009.