Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Union Park
A new gate installation in Union Park usually runs between $1,800 and $6,500, depending on whether you’re replacing a single pedestrian gate or automating a wide double driveway entrance. Most single swing gates land in the $2,200-$3,800 range, while slide gates and double gates with operators start around $4,000 and can reach $9,000 for heavy-duty solar setups on acreage. We work across Union Park’s manufactured-home communities, 1980s tract neighborhoods, and the larger lots east toward the Econlockhatchee River. Call (626) 649-4572 for a written price before any work starts.
Key Takeaways
- Most gate installations in Union Park cost $1,800-$9,000, with driveway gates starting around $2,200.
- Union Park’s summer lightning and high humidity mean both the electrical and mechanical side of a gate fail together more often than not.
- We test the buried vehicle-detection loop before condemning an operator, which saves Union Park customers hundreds in misdiagnosed parts.
- Every installation includes a written price, shoe covers and drop cloths inside your home, and a cleanup photo before we leave.
Why Latch & Post Gate Repair Is Union Park’s Preferred Gate Installation Company
We’ve spent enough time on Union Park’s community entrances to know what’s actually failing before we arrive. The gate that looks dead on Rouse Road or off Econlockhatchee Trail often has a broken loop detector under the asphalt, not a fried control board. That diagnostic order matters. It’s the difference between a $400 loop repair and a $1,200 operator replacement you didn’t need.
Our technicians are background-checked and uniformed, and they work to the Cedarwell C.A.R.E. values. Clean up like it is our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work. That’s not marketing language. It’s the routine on every job.
Cody Beckman leads our team, and he’s particular about the details most companies skip. Shoe covers go on before we step inside. Drop cloths go down. When the job is done, you get a photo of the clean-up. And if something isn’t right within 365 days, we make it right under the Done Right Promise. No fine print, no argument.
Electric Gate Installation in Union Park
Electric gate installation in Union Park means putting a motorized operator on a new or existing gate, wiring it for power, and making sure the safety edges and photocells work on day one. The cost for a standard single swing gate with an operator runs $2,400-$4,200. A double swing gate starts around $4,500. Slide gates run $4,000-$7,000. Every price is written down and agreed before we touch anything.
Surge Protection and Control Boards
Union Park sits in a band of near-daily summer thunderstorms from June through September. Lightning strikes and power surges are the leading cause of fried gate-operator control boards in this part of Orange County. When we install a new electric gate here, we recommend a surge protector wired into the operator circuit. It’s a small addition that saves a lot of heartache in August.
Solar Operators for Long Driveways
Some Union Park lots, especially the larger parcels east toward the river, don’t have a practical power run to the gate. A solar operator with a battery bank handles that cleanly. We install Ghost Controls and Viking solar kits sized for the gate’s actual width and weight. No trenching, no electrical bill, and the battery holds through the cloudy stretches of winter.
Driveway Gate Installation in Union Park
Driveway gate installation in Union Park covers everything from a simple chain-link gate on a 1980s tract home to a wide double swing gate on a couple of acres off Rouse Road. A basic single driveway gate with the post, hinges, and gate panel runs $1,800-$2,800. Add an operator and you’re at $2,400-$4,200 before any custom fabrication. Longer double gates push $5,000-$9,000, especially when we’re reinforcing the posts for the span.
Wide Gates and Heavy-Duty Posts
Rural and acreage entrances around Union Park usually need a wider gate than a city driveway. A 16-foot or 20-foot double gate puts real weight on the hinge posts. We set posts in concrete at a depth that matches the gate width and weight, and we use thicker steel for anything over 14 feet. Skimping there guarantees sag within a year.
Chain-Link and Wrought-Iron Choices
Chain-link remains the most common material for Union Park’s older homes and manufactured-home communities. It’s practical and holds up to daily traffic from dozens of households. Wrought-iron looks better and resists rust longer when it’s powder coated, but it costs more. We’ll walk you through the tradeoffs and give you a written price for each option before you decide.
Trusted Brands We Service in Union Park
Our Gate Installation team is factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Union Park customers, that means we stock the common parts locally so we’re not waiting on a shipment when your control board goes down. We service DoorKing and Elite operators regularly on community entrances, and Ghost Controls and Viking solar kits on acreage driveways. The right part, installed by someone who knows the brand, saves you a second visit.
Common Gate Installation Problems We See in Union Park Homes
- Broken loop detectors make a healthy operator look dead. Years of re-paving and heavy traffic through manufactured-home community entrances crush the original 1980s and 1990s loop wiring under the asphalt. We test the loop first, because replacing an operator that still works is wasted money.
- Rust on east-facing hinge posts causes sag and binding. Humidity above 80% for months at a time eats steel hinges, tracks, and racks. The gate sags at the latch side and scrapes the ground, and the motor strains until it trips its limit switch.
- Surge damage from summer lightning storms. Control boards fry when a near miss sends voltage through the operator circuit. The gate goes dead even though the mechanical parts are fine. A surge protector at installation prevents this.
- Original community gates with no modern safety edges. Many Union Park community entrances still run operators without photocells or reversing safety edges. That’s a real hazard when a child or pet comes through. We install both on every new electric gate.
Pricing for Gate Installation in Union Park, FL
A basic pedestrian gate in Union Park starts around $1,800. Single driveway gates run $2,200-$3,800 installed, depending on the material and whether you want an operator. Double gates and slide gates start at $4,000 and can reach $9,000 for heavy-duty solar setups on wide acreage entrances. What moves the number is the gate width, the post depth, the operator type, and whether we need to trench power or install solar. You’ll see the exact figure in writing before we order anything. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Union Park
Our crews cover Gate Installation in Union Park and the surrounding Central Florida market. If you’re in Jacksonville, Miami, Tampa, or Orlando, the same written-price policy and 365-Day Done Right Promise apply. Contact us at (626) 649-4572 and we’ll get you scheduled with a technician who knows your area.
Serving Union Park, FL - Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Union Park
The buried vehicle-detection loop under the asphalt apron is usually the culprit. Years of re-paving and heavy traffic through manufactured-home community entrances break the loop wiring, so the gate never gets the signal to open. The operator has power, but it’s waiting for a car that it can’t detect. We test the loop before replacing anything else. Call (626) 649-4572 and we’ll run the diagnostic.
Yes, a properly sized solar opener handles gates up to 20 feet wide and 1,000 pounds. We size the panel and battery bank to the gate’s weight, daily cycles, and the cloudy stretch from December through February. Ghost Controls and Viking make solar kits we trust for Union Park acreage. The key is matching the operator to the actual load, not guessing.
The hinge post has usually rotted or shifted at the base from years of humidity and rust. Union Park’s east-facing gates hold morning dew longest, and that moisture works its way into the post. The gate panel might be straight, but the post is leaning and the weight is pulling everything down. We lift the gate, reset or replace the post, and set it in concrete at the right depth.
Yes, and you should have them. Photocells reverse the gate when someone or something crosses the beam. That matters on community entrances where kids and pets walk through daily. We install photocells and a reversing safety edge on every new electric gate, no exception. It’s part of the written price, not an add-on.
Because the climate here attacks both systems at once. Summer lightning fries the control board while the humidity rusts the hinges and tracks. By the time the gate stops working, there’s usually a surge-damaged board and a corroded hinge post. We inspect both on every call so you don’t get a board replaced today and a post failure next month.
If your gate is new to this house or you’re building an entrance from scratch, call (626) 649-4572. We’ll measure, write you a price, and walk you through the options without pressure. Shoe covers and drop cloths are standard on every visit, and you’ll get a photo of the clean-up before we leave.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family serving Union Park since 2009.