Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across The Crossings
Gate installation in The Crossings means replacing systems that were built between 1978 and 1995, and many of them are failing now. We install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates across The Crossings with hardware that meets Miami-Dade County’s High Velocity Hurricane Zone standards. If you live in The Crossings and your HOA gate is sagging, jamming, or simply worn out, call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is The Crossings’s Preferred Gate Installation Company
The Crossings homeowners call us because we know what their gates are up against. Most of the gates in The Crossings were installed during the planned-community boom between the late 1970s and mid-1990s. Those original aluminum and ornamental-iron systems, many with first-generation operators, are now 30 to 45 years old. We understand that when one fails, you’re not just replacing a motor. You’re often dealing with a corroded track, a shifted post footing, or a code inspection under post-Hurricane Andrew rules that an out-of-area contractor won’t anticipate.
Our crews work in The Crossings regularly and arrive familiar with the community layout: shared vehicular entry gates, tight rights of way, and HOAs that need the driveway open while work happens. Every Gate Installation visit includes a written price before we start, shoe covers and drop cloths inside the home, and a photo of the cleanup before we leave. Cody Beckman set that standard, and every technician carries it.
The 365-Day Done Right Promise backs every gate we install in The Crossings. If it isn’t right, we make it right. No argument, no fine print. That’s why homeowners here recommend us to neighbors on the next street over.
Gate Installation Services in The Crossings
Gate Installation Services in The Crossings typically involve replacing an aging swing or sliding gate, its post, or its track, then bringing the operator up to current Miami-Dade code. A standard single swing gate replacement in The Crossings runs $2,400 to $4,800 depending on the panel material and whether the post needs resetting. A sliding gate with new track and operator typically runs $3,200 to $6,500. You’ll see the exact number in writing before any work begins.
Driveway Gate Replacement
Many The Crossings homes have shared driveway entrances governed by an HOA. We replace the gate panel, hinge post, or operator while keeping vehicle access working with a temporary manual latch, so no one is locked out during the job. We coordinate with your HOA if they need documentation for their records.

Pedestrian Gate Installation
Pedestrian gates in The Crossings get daily use from kids walking to school and neighbors cutting through. We install self-closing hinges, magnetic locks, and keypad entry systems sized for the salt air and humidity that eat cheap hardware quickly here.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in The Crossings
Electric Gate Installation in The Crossings means more than bolting on an operator. Because the community sits inside Miami-Dade County’s High Velocity Hurricane Zone, the operator, track, and post footing must meet Miami-Dade Notice of Acceptance standards. A basic single-arm swing gate operator install runs $1,800 to $3,200. A full sliding gate with operator, loop detector, and safety edges runs $3,500 to $6,800. The exact price is written down and agreed before we touch a single bolt.
Operator Replacement and Automation
We replace first-generation operators with modern units from FAAC, BFT, Linear, and Viking that carry Miami-Dade NOA approval. The old operators from the 1980s and 1990s often can’t be repaired because parts are gone, and they wouldn’t pass today’s wind-load inspection anyway. We confirm the NOA label before installation so your permit inspection passes the first time.
Safety Edges and Loop Detectors
Every electric gate we install in The Crossings includes safety edges and vehicle loop detectors, not as add-ons but as part of the job. These are the components that stop a closing gate when a child or pet is nearby. We wire them, test them, and show you how to test them yourself before we leave.
Trusted Brands We Service in The Crossings
We’re factory-trained on the brands The Crossings homeowners and HOAs already have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When you need a FAAC swing gate operator replaced on a townhome cluster off Southwest 112th Avenue, or a BFT board swapped after a summer storm near Kendall Drive, we’re not guessing. We carry the common boards, safety edges, and remotes on the truck for faster turnaround in The Crossings.
Common Gate Installation Problems We See in The Crossings Homes
- Salt-corrosion on original 1980s slide gate tracks. Proximity to Biscayne Bay sends salt-laden air into The Crossings year-round. Tracks corrode, the gate jumps the rack and pinion, and the whole assembly jams in a shared driveway. Replacing the operator alone won’t fix this; the track has to go too.
- Rotted hinge posts on older swing gates. The hinge post rots or shifts at the concrete footing after decades of Miami humidity and storm soak. The gate sags even after panel adjustment, and a new operator will just strain against a bad post until the post gets reset.
- Lightning-fried control boards in summer. The Crossings sits in one of the highest lightning-strike corridors in the country. Afternoon storms from June through September routinely take out loop detectors and control boards, leaving entry gates stuck open. Homeowners end up hand-keying the pad manually until a board swap happens.
- Failed inspections from non-NOA operators. A nationally popular operator without a Miami-Dade Notice of Acceptance can fail an HVHZ inspection in The Crossings outright. We’ve seen out-of-area installs get torn out and re-permitted. We verify the NOA before the operator goes in.
Pricing for Gate Installation in The Crossings, FL
A single swing gate with new hinges and a post reset in The Crossings runs $2,400 to $4,800. A sliding gate with new track, operator, and safety edges runs $3,200 to $6,500. Double gates or ornamental iron add cost because of panel weight and hinge count. The HVHZ wind-load requirement means we may need a heavier post or a larger footing than a generic install elsewhere in Florida, and that’s built into the written quote. Call (626) 649-4572 for a free estimate on your specific gate. The price is written down before work starts. Always.
We Also Serve Cities Near The Crossings
Our crews work throughout South Florida, from Jacksonville to The Crossings and across Miami, Tampa, and Orlando. If your property sits just outside The Crossings proper, call us. We’ll tell you straight whether we can schedule you and when.
Serving The Crossings, FL - Our Local Coverage Area
We’re based in the The Crossings area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in The Crossings
You can, but in The Crossings the swap triggers a post-Hurricane Andrew HVHZ inspection of the entire gate assembly, not just the operator. The track, hinge post, and concrete post footing all have to meet Miami-Dade NOA standards. If the old track is corroded or the post footing has shifted, which is common on 30-to-45-year-old The Crossings gates, the new operator won’t pass inspection until those are fixed too. Call (626) 649-4572 and we’ll tell you what a full replacement looks like in writing.
In The Crossings, it’s usually the track. Biscayne Bay salt air corrodes the original 1980s tracks until the gate jumps the rack and pinion and wedges itself. The operator may still be fine. We check both before recommending anything, and you’ll get a written price for whatever is actually wrong. Call us and we’ll come look.
Yes, for most electric gate installations in unincorporated Miami-Dade, which includes The Crossings. A permit is pulled and the work is inspected against HVHZ wind-load standards. We handle the permit and the inspection as part of the job. The operator we install will carry its Miami-Dade Notice of Acceptance so the inspection passes the first time.
We install a temporary manual latch so the driveway stays usable while the old gate is out and the new one goes in. For pedestrian gates, we schedule around school drop-off and pickup when we can. The goal is that no one in The Crossings is locked out or forced to climb over anything while we work.
Summer thunderstorms in The Crossings bring frequent lightning strikes, and this area sits in one of the highest strike-density corridors in the country. Strikes fry control boards and loop detectors. The heavy afternoon rain also exposes any failing seal on the operator housing. We stock the common boards and detectors on the truck through the summer so we’re not waiting on parts. Call (626) 649-4572 and a live person answers around the clock.
Call Latch & Post Gate Repair for Gate Installation in The Crossings
If your gate is 30 to 45 years old, sagging, jamming, or limping on a first-generation operator, call us at (626) 649-4572 for a free estimate. A live person answers 24/7. We’ll send a background-checked, uniformed technician to The Crossings, put shoe covers and drop cloths down if we step inside, and hand you a written price before any work begins. The 365-Day Done Right Promise covers it all.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving The Crossings since 2009.





Before
After
Before
After
Before
After