Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Texas City, TX
Gate repair in Texas City means working with salt air, petrochemical exposure, and a housing stock that ranges from 1950s ranch homes to newer automated subdivisions. At Latch & Post Gate Repair, we focus on three things: gate repair, gate installation, and electric gate repair. Each has its own Texas City page linked below, because the work, the pricing, and the conditions differ enough that they deserve their own detail. If you’re standing at a gate that won’t close or an opener that stopped responding, call (626) 649-4572 and a live person answers, day or night.
Why Texas City Homes Are Different
Most of Texas City’s residential streets sit close enough to Galveston Bay that the salt air is a constant. Hinges, springs, roller brackets, and operator housings oxidize faster here than they do twenty miles inland. Add the airborne chemical particulates that drift from the refinery corridor near the port, and you have a specific kind of corrosion: powder-coated finishes that chalk and peel early, galvanized hardware that pits within a few seasons, and circuit boards inside electric operators that fail from contamination rather than age.
The housing stock tells the same story. Neighborhoods like Skyline and Highland Terrace hold many modest post-war ranch homes built in the 1950s through 1970s, and a lot of those homes still carry the original ornamental iron driveway gates. That hardware has been exposed to bay air for fifty or sixty years. The hinges are often worn egg-shaped, the latch posts have shifted, and the gate itself may drag against concrete that has moved over time. Then there are the 1990s and 2000s subdivisions, where automated gate operators installed during construction are now reaching the end of their working life. The failure pattern in Texas City is consistent: the motor still hums, but the gate binds, or the remote range drops, or the safety sensors stop reading.
Flooding shapes the work as well. Storm surge and standing water after heavy storms find their way into gate operators and underground conduit runs, and after every major storm season we see a wave of calls for operators that took on water. Homeowners who replace an operator after a flood do better with sealed enclosures and corrosion-resistant wiring, and we price those options plainly so the decision is yours, not a surprise.
Our Main Texas City Services
Most calls to our Texas City line start with one of two problems: a gate that won’t open or close properly, or an electric operator that stopped responding. Here is what each service involves locally.
Gate Repair in Texas City
Gate repair here usually means freeing a gate that has settled, replacing hinges or latch hardware that salt air has eaten through, or welding a cracked frame before it lets go entirely. The work is methodical: we level the gate, set the hinges, align the latch, and check that the gate swings or slides without force. On older Texas City iron, we often find that decades of bay exposure have done more damage to the hardware than the frame itself, which is good news for the repair bill. Gate Repair in Texas City covers the full scope and the pricing.
Gate Installation in Texas City
New gate installation in Texas City means choosing materials that can take the local air. We steer homeowners toward finishes and hardware that hold up against salt and chemical exposure, and we set posts deep enough that shifting Gulf Coast soil doesn’t move them within a few years. Every installation starts with a written price and a straight conversation about what the gate will weigh, how it will swing or slide, and what the operator will need. Gate Installation in Texas City walks through the process and the numbers.
Electric Gate Repair in Texas City
Electric gate repair in Texas City focuses on the components that get abused by the local climate: control boards, limit switches, safety edges, radio receivers, and motors. When an operator fails here, the cause is often moisture or corrosion rather than simple age, so we test the full circuit before replacing parts. We service LiftMaster, Viking, and Ghost Controls operators among others, and we carry common components so many fixes happen on the first visit. Electric Gate Repair in Texas City covers diagnostics, repair, and replacement options.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Texas City
We work on the gate operators most common in Texas City driveways and facilities: Linear, Viking, Ghost Controls, and DoorKing, among others. We keep their common control boards, remotes, and safety parts stocked, which shortens turnaround. See our brands for the full list.
Pricing for Gate Company in Texas City, TX
Below are the typical price ranges we quote in Texas City. The written price you receive includes all labor and parts, and you see it before any work begins.
| Service | Typical range in Texas City |
|---|---|
| Gate latch replacement | $185 - $420 |
| Hinge replacement (per pair) | $220 - $510 |
| Gate realignment and leveling | $240 - $560 |
| Welded frame repair | $310 - $730 |
| Roller and track replacement (slide gates) | $360 - $820 |
| Gate opener motor replacement | $520 - $1,140 |
| Control board replacement | $430 - $960 |
| Safety sensor or photo eye replacement | $240 - $590 |
| Full gate installation (standard steel or aluminum) | $2,600 - $6,800 |
| Electric operator installation | $1,700 - $4,300 |
Salt-corrosion and flood-damaged components tend to push Texas City jobs toward the upper end of these ranges, because adjacent parts often need replacement at the same time. We give you the exact number in writing before any work starts, and that number doesn’t change unless you approve additional work in advance.
Neighborhoods We Serve in Texas City
We work across the full residential side of Texas City. Our crews typically respond within 24 to 48 hours for scheduled repairs, and we keep a same-week window for installation estimates.
- Skyline
- Highland Terrace
- Westover Park
- Highland Creek
- Bay Ridge
Service Area – Cities Near Texas City
We serve Texas City and the surrounding Galveston Bay communities, including La Marque, TX, Hitchcock, TX, Dickinson, TX, and Bacliff, TX. If you’re nearby and your gate or operator needs attention, call us and we’ll let you know the soonest available window.
Serving Texas City, TX - Our Local Coverage Area
We’re based in the Texas City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Texas City
For most repairs, we schedule within 24 to 48 hours of your call. If the gate is stuck open or won’t close at all, tell us when you call and we’ll treat it as a safety priority and get a technician out faster. A live person answers the phone around the clock.
Permit requirements vary by project and by neighborhood or HOA. For most residential gate repairs and like-for-like replacements, no permit is involved. If a new installation triggers a permit, we’ll flag it in the written quote before any work starts, and we can coordinate the details.
Yes. We replace hinges, rollers, and operator boards in Texas City far more often than in inland communities, because the bay air and the refinery corridor accelerate oxidation. Choosing sealed hardware and corrosion-resistant finishes at the time of repair or installation makes a measurable difference over the next five to ten years.
For a straight answer and a written price, call Latch & Post Gate Repair at (626) 649-4572. We’ll talk through what’s happening at your gate, give you a clear number, and schedule a time that works for your household.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Texas City Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco