Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across San Bruno
Gate installation in San Bruno usually costs between $1,400 and $6,500 depending on whether we’re hanging a new pedestrian gate, building a double driveway gate, or retrofitting a motorized opener onto an existing mid-century frame. Most San Bruno jobs take one to two days once materials are on hand, and we give you a written price before any work starts. We know the wind patterns off the San Bruno Gap and how they punish gate hardware, and we know the older flat streets east of El Camino Real where 1950s posts have heaved out of their concrete pads. Call (626) 649-4572 and a live person will answer, day or night.
Why Latch & Post Gate Repair Is San Bruno’s Preferred Gate Installation Company
Latch & Post Gate Repair has worked on gates throughout San Bruno for years as part of the Cedarwell family, and we’ve built a reputation on one thing: showing up on time, quoting honestly, and leaving the property cleaner than we found it. We’re not a general handyman service. We’re a dedicated Gate Installation team that works on latch hardware, posts, hinges, operators, and full gate systems every single day.
San Bruno homeowners call us because we understand what the San Bruno Gap does to a gate. Salt air from the Pacific marine layer and bay-side humidity from the east corrode hinges and steel post bases faster here than in Millbrae or South San Francisco. Wind gusts through the Gap rack frames and trip obstruction sensors on automatic operators. Our background-checked, uniformed technicians show up with shoe covers and drop cloths for every job, and before we leave you’ll see a photo of the clean-up. That’s the Cedarwell Care Promise: Clean up like it is our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work. Every installation is covered by our 365-Day Done Right Promise. If it isn’t right, we make it right. No argument.
Gate Opener Installation in San Bruno
Gate Opener Installation in San Bruno means mounting a motorized operator, setting the safety photo eyes, running or connecting low-voltage wiring, and calibrating the open and close limits so the gate doesn’t bind or slam. On a typical San Bruno driveway gate, an opener installation runs $800 to $2,200 depending on operator brand and whether we’re adding a new keypad, push-button station, or vehicle exit loop. If the gate has been hanging for decades on the original hinges, we’ll often recommend new hinges and a reinforced post bracket at the same time, because a fresh operator on a sagging gate will burn out early.
Retrofitting an Operator to a Mid-Century Gate
Most San Bruno homes east of El Camino Real have swing gates hung in the 1950s or 1960s, before anyone planned for a LiftMaster arm bolted to the brick column. We can retrofit a modern operator to most of these gates, but the post has to be sound. If the post has heaved or the wood core is spongy, we’ll say so in the written quote before we touch anything.
Operator Brands We Trust
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For San Bruno’s wind, we tend to recommend FAAC and LiftMaster swing arm operators for their obstruction sensitivity controls, but the right unit depends on gate weight, panel height, and how exposed your driveway is to the Gap.
Gate Fabrication in San Bruno
Gate Fabrication in San Bruno means building a new gate frame and panel to fit your exact opening, using steel or aluminum, and then hanging it on new posts or reinforced existing ones. A standard single pedestrian gate in San Bruno runs $1,400 to $2,800, while a double driveway swing gate with steel frame and wood or composite infill typically runs $3,800 to $6,500. We measure on-site, quote the full job in writing, and never start cutting or welding until you’ve approved the number.
Custom Steel and Aluminum Gates
We build gates to match the house. On the mid-century streets around San Bruno Avenue and Huntington Avenue, that often means a simple steel frame with vertical pickets or a wood-composite panel that matches a 1950s ranch facade. Aluminum holds up better to the Gap’s salt air, but steel is stiffer on wide driveway spans. We’ll tell you which makes sense for your opening and your exposure.
When Replacement Beats Another Repair
We’re honest about this. If a gate frame has been welded three times and the bottom rail is rusted through with daylight showing, a new gate is the cheaper answer over five years. We’ll show you the numbers both ways and let you decide.
Trusted Brands We Service in San Bruno
We service and install operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we work on these brands every day, we stock the common control boards, arms, photo eyes, and safety edges our San Bruno customers need, which means fewer return visits and faster turnarounds. If your existing operator is a BFT or a Viking and you want to stay with what you know, we can match it. If it’s time to switch to something more wind-tolerant, we’ll walk you through the options and the honest trade-offs.
Common Gate Installation Problems We See in San Bruno Homes
- Wind-tripped obstruction sensors: San Bruno Gap gusts press against a swing gate panel and fool the operator into thinking something’s in the way, so the gate cycles open or stops mid-travel. We adjust sensitivity and, on exposed driveways, recommend a stiffer hinge post and a wind-rated operator.
- Heaved hinge posts in original 1950s concrete: Decades of wind load cycling loosen the old concrete footing, and the post tilts just enough to drop the gate. What looks like a simple hinge replacement becomes a post reset once we dig down and see the footing.
- Salt-air corrosion on hinges and post bases: The dual exposure from the Pacific marine layer and bay humidity rusts hardware faster in San Bruno than in sheltered Peninsula cities. Hinges that might last 15 years in Burlingame can show significant rust failure in 8 to 10 years here.
- Obsolete operator control boards: A lot of San Bruno gates still run control boards from the 1990s that are no longer made. When the board goes, the fix is either a costly obsolete part or a full operator replacement. We usually recommend replacing the operator and keeping the gate if the frame is still solid.
We were called to a 1950s ranch on a flat street east of El Camino Real in San Bruno where the driveway swing gate had dropped and the LiftMaster operator cycled open for no reason every afternoon. The original hinge post had heaved out of its 1950s concrete pad, so we reset the post footing, replaced the rusted hinges, and recalibrated the operator’s safety photocell and obstruction sensitivity to stop the wind-triggered cycling. The sag correction and post reset took it from a gate that scraped the ground to one that clears and runs smoothly, even on gusty afternoons.
Pricing for Gate Installation in San Bruno, CA
Here’s what you can expect to pay in San Bruno for common gate work. A standard pedestrian gate, hung on existing sound posts, runs $1,400 to $2,800. A double driveway swing gate with steel frame and pickets runs $3,800 to $6,500. Gate opener installation runs $800 to $2,200. If we need to reset a post or pour a new footing, add $600 to $1,400 per post. These are honest ranges, not bait numbers. You’ll see the exact figure in writing before we start, and you’ll never get a surprise invoice at the end. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near San Bruno
Our Gate Installation in San Bruno team also covers Millbrae, South San Francisco, Pacifica, and Brisbane. If you’re a few blocks over the city line, the wind and salt-air issues are often the same. Call and we’ll schedule a free measure.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in San Bruno
That’s almost always the obstruction sensor reacting to wind pressure on the gate panel, a pattern we see constantly in San Bruno because of the Gap. The fix usually involves recalibrating sensitivity, stiffening the hinge post, and sometimes adding a wind-rated operator. Call (626) 649-4572 and we’ll diagnose it on the first visit.
If the post is solid and plumb, we can replace just the hinges and brackets. But on the older streets east of El Camino Real, we often find the post itself has heaved out of the original 1950s concrete pad, and that means a footing reset is required before the gate will hang level again. We’ll show you exactly what we find before any work begins.
Gate hardware that might last 15 years in a sheltered city like Burlingame can show significant rust failure in 8 to 10 years in San Bruno because of the dual salt-air exposure from the Pacific marine layer and bay humidity. Stainless steel or powder-coated hardware and regular lubrication help, but here the environment is simply harder on metal. We specify materials accordingly.
Yes, in most cases. We’ve retrofitted LiftMaster and FAAC operators onto 1950s and 1960s gates throughout San Bruno, including many homes near Crestmoor and the flat streets east of El Camino Real. The gate’s weight, post condition, and wind exposure decide whether it’s practical, and we’ll quote the retrofit honestly against the cost of a new gate if the old one is near the end of its life.
Automatic gates in San Bruno fall under California’s UL 325 standard, which requires photo eyes or a safety edge that reverses the gate on contact, plus warning signage where applicable. Any operator we install in San Bruno includes properly positioned safety sensors, and we test them before we leave. Safety edges and photo eyes are not optional add-ons-they’re part of the job.
If your gate is old, wind-beaten, rusting, or running on a dead control board, call us at (626) 649-4572. We’ll give you a written price before any work starts, show up when we say we will, and leave your floors clean and your gate working. A live person answers every call, 24 hours a day, 7 days a week.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving San Bruno and the surrounding Bay Area as part of the Cedarwell family.