Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pacifica
A new gate installation in Pacifica typically runs $1,800 to $6,500, with most driveway gates falling between $2,400 and $4,200, and the oceanfront neighborhoods of Sharp Park and Rockaway Beach pushing materials toward the higher end because salt fog eats standard hardware. If you’re reading this because an old gate has finally sagged past saving, or you’re building out a property in Linda Mar and want something that won’t rust shut in three winters, we can measure it, quote it in writing, and get it installed without turning your yard into a construction site. Call (626) 649-4572 and you’ll talk to a live person, not voicemail. Our Gate Installation team handles everything from single pedestrian gates to double driveway swing gates and electric operators.
Why Latch & Post Gate Repair Is Pacifica’s Preferred Gate Installation Company
Pacifica isn’t like the rest of the Bay Area when it comes to gates. The marine layer sits on this city most mornings, and the salt off the Pacific gets into every hinge, roller, and control board with a persistence you just don’t see in San Bruno or Millbrae. That’s why homeowners here tend to call us after another company installed something that worked fine for a year and then started failing. We’ve been part of the Cedarwell family since 2009, focused only on gates: Gate Repair - Pacifica, installation, and electric operator work, nothing else. Our technicians are background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values on every job: clean up like it’s our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work.
Every Gate Installation in Pacifica job gets a written price before we start, shoe covers and drop cloths inside your home, and a photo of the clean-up before we leave. That’s not an upsell; it’s the standard. If the work isn’t done right, the 365-Day Done Right Promise means we make it right, no argument, no fine print. Led by Cody Beckman, the team works to the Cedarwell Care Promise on every visit. Dispatch and scheduling are coordinated from the brand’s San Francisco Bay Area office, with crews serving Pacifica locally.
Electric Gate Installation in Pacifica
Electric Gate Installation in Pacifica almost always means a swing or slide operator mounted on a gate that’s fighting two enemies at once: salt air and wet ground. The oceanfront-facing streets in Sharp Park and Rockaway Beach see automatic gate motors and control boards fail within three to five years when they’re housed in standard aluminum enclosures. Salt fog infiltrates what’s supposed to be a weatherproof housing, oxidizes the board, and kills the unit. A proper installation here starts with a fully sealed NEMA 4X-rated operator, stainless fasteners, and safety photocells wired to the current standard. Expect to pay $2,800 to $5,400 for a single swing gate with automation in these neighborhoods.
Marine-grade operator retrofits
On a Sharp Park job facing the ocean, we pulled a rust-locked LiftMaster operator off a 1960s wrought-iron swing gate whose hinge post had heaved in moisture-saturated concrete. We set a new post footing, stainless-packed the hinges, and upsized to a NEMA 4X-sealed operator with fresh safety photocells. Six months later the gate still opened clean in the fog; the old board had shorted within a year of its last replacement.
Safety sensors and edge protection
Automatic gates installed under California code require monitored safety entrapment protection: photocells across the gate path and contact edges on the gate itself. If you’re retrofitting an operator onto an existing Pacifica gate, we’ll wire in the sensors and set the force limits so the gate reverses on obstruction. This is not optional; it’s part of a code-compliant installation, and we wouldn’t install less.
Driveway Gate Installation in Pacifica
Driveway Gate Installation in Pacifica covers both swing and slide gates, and the choice here usually comes down to your driveway’s slope. Plenty of streets in Linda Mar and the hills above Sharp Park have driveways that pitch uphill from the road. A slide gate needs a relatively level track run, so on steeper lots we’ll recommend a swing gate, often a double gate if the driveway opening is wide enough for two cars to pass. A double swing driveway gate in Pacifica runs $4,200 to $7,800 installed, depending on steel gauge, infill style, and operator choice. A single swing driveway gate starts around $2,400.
Post footings built for wet ground
The tract homes built in the 1950s through 1970s poured gate post footings into whatever concrete and soil was convenient at the time. Decades of Pacifica rain and fog have saturated those footings. We see posts heave in winter and settle in summer, which throws the gate out of alignment. For a new installation, we dig deeper footings and use galvanized post bases with drainage consideration. The post carries the gate; get the post right and the rest holds.
Wrought iron and steel options
Most Pacifica homeowners want steel for longevity, but the finish matters more than the material. We specify marine-grade powder coating or a zinc-rich primer with a topcoat rated for coastal exposure. Standard hardware-store gate kits don’t survive here. We’ll quote brand-new steel panels, hinges, and structurally reinforced posts in writing before we order anything.
Trusted Brands We Service in Pacifica
We install and service equipment from the brands Pacifica families actually own: Viking, Ghost Controls, and DoorKing are the ones we see most often on local driveways. We also work on FAAC, BFT, Linear, Elite, and Mighty Mule. Our techs are factory-trained on these systems, which matters when a board fails in the fog at Rockaway Beach and the manufacturer’s wiring diagram doesn’t match what’s in front of you. We carry common parts on our trucks so a Pacifica service call is usually one visit, not three.
Common Gate Installation Problems We See in Pacifica Homes
- Salt-fogged operator enclosures. Standard aluminum housings on ocean-facing gates in Sharp Park and Rockaway Beach corrode inside and out within a few seasons. By year three, the control board looks like it was pulled from a tide pool. This is a year-round failure mode here, not a winter-only problem.
- Heaved and sunken post footings. Concrete poured in the 1960s in Linda Mar and Sharp Park has spent fifty years absorbing coastal moisture. The soil shifts, the footing moves, and the gate starts dragging or binding. Misalignment fixes won’t hold until the footing is rebuilt.
- Corroded hinge and roller hardware. Tract-era chain-link and wrought-iron gates were never specced for salt air. Hinges seize, rollers grow rust blooms, and pivot points grind. The gate itself may be solid, but the hardware around it is the failure point.
- Obsolete operator boards. We regularly find old circuit boards that were discontinued years ago. When a board fails on a fifteen-year-old operator, replacement parts often don’t exist, and the honest answer is a new operator rather than a patch job.
Pricing for Gate Installation in Pacifica, CA
Here are the ranges we quote in Pacifica for new gate work. The exact number depends on gate width, steel gauge, automation, and whether the post footings need rebuilding:
| Service | Typical Pacifica Range |
|---|---|
| Pedestrian gate installation | $850 - $1,900 |
| Single driveway swing gate (manual) | $2,400 - $3,800 |
| Single driveway swing gate (automated) | $2,800 - $5,400 |
| Double swing gate (automated) | $4,200 - $7,800 |
| Sliding gate (automated) | $3,200 - $6,200 |
| Post footing rebuild | $400 - $900 per post |
Every bid is a written price agreed before we start. No open-ended hourly billing on installations. Call (626) 649-4572 for a free estimate. You’ll get the number in writing and time to think about it.
We Also Serve Cities Near Pacifica
In addition to Pacifica, our gate installation crews serve San Bruno, South San Francisco, Millbrae, and Daly City. Each of those cities has its own microclimate and housing stock, but the same rule applies: written prices, sealed hardware where salt is in the air, and post footings built to last. If you’re just over the hill in San Bruno or down toward Daly City, we’ll come out and measure.
Serving Pacifica, CA - Our Local Coverage Area
We’re based in the Pacifica area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Pacifica
They fail fast because the salt-laden marine layer off the Pacific infiltrates standard aluminum operator housings and corrodes the control boards and motors. In Sharp Park and Rockaway Beach, many builders’ grade operators die within three to five years. The fix is a NEMA 4X-sealed enclosure and stainless hardware; if you already have an operator in these neighborhoods and it’s been in place more than four years, it’s likely living on borrowed time. Call (626) 649-4572 and we’ll tell you honestly if your unit is worth saving.
Usually the post. A dragging gate on a 1960s Linda Mar property often means the concrete footing has heaved or sunk after decades of coastal moisture. Realigning the gate helps temporarily, but if the post moves again next rainy season, the sag returns. We’ll assess the footing before quoting any realignment, and we’ll tell you if a post rebuild is the cheaper long-term answer.
For Pacifica’s salt-fog environment, we most often install Viking, Ghost Controls, and DoorKing models rated for marine exposure. The key spec is the enclosure rating, not just the brand name. We pair these with stainless fasteners and sealed junction boxes. Call us and we’ll recommend the operator that matches your gate weight and your street’s fog load.
Yes. Automatic gate operators installed or substantially modified in California must have monitored entrapment protection: photocells and contact edges meeting current standards. An old operator that predates the requirement is still a liability and should be upgraded when we install or rebuild the gate. We will not wire an operator without the proper safety devices.
If the board is discontinued and the enclosure is visibly oxidized, replacement is usually the cheaper answer, especially in fog-soaked neighborhoods like Rockaway Beach. Repairing a board that’s already pitted from salt exposure means repeating the same repair in a year or two. We’ll tell you the board part number, whether it’s still available, and what the honest comparison looks like. Call (626) 649-4572 and we’ll walk you through it over the phone.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Pacifica since 2009.