Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Rendon
A new driveway gate in Rendon typically runs between $4,800 and $18,000 installed for Gate Repair - Rendon, depending on whether you’re after a heavy ornamental iron swing gate or a sliding ranch-style gate on an acreage lot. We schedule a free on-site measure within a few days, and you’ll get a written price before any work begins. Call us at (626) 649-4572 and a live person picks up, day or night.
Rendon is our kind of territory. We know the roads off Rendon Road and Blue Mound Road, the half-acre estates, the horse properties, the long gravel drives. A gate out here isn’t a suburban afterthought. It’s what keeps a toddler away from the county road and keeps a curious mare from wandering toward the fence line. When we quote a gate in Rendon, we’re quoting it for your soil, your frost line, your gate weight, and the way your family actually uses the entrance. Not a template.
Every project starts with the same routine: a technician walks the site with you, checks the post depth, measures the opening, and asks how many times a day that gate will cycle. Then we hand you a written number. No pressure. No surprises.
Why Latch & Post Gate Repair Is Rendon’s Preferred Gate Installation Company
We’ve been part of the Cedarwell family of gate specialists since 2009, and the work in Rendon leans specific: heavy custom gates on acreage lots, ornamental iron on new estates, and plenty of sliding gates on properties where the driveway curves or slopes. We carry parts for both worlds because the same street here can have a 2015 custom estate gate on one side and a 30-year-old pipe gate on the other.
Homeowners around Rendon tell us the same things after the job: the crew put down drop cloths where the work crossed into the garage, someone asked before moving a planter near the post, and the cleanup photo arrived before the truck pulled out. Those aren’t extras we offer. They’re the Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we touch anything, respect your quiet hours, and explain the price before the work. Cody Beckman leads our technicians, and he still reviews install photos from Rendon jobs personally.
We don’t route Rendon calls through a call center. A live person answers, every time, and we keep our schedule honest about when we can be on your property. For installations, we book a measure first, then the build, then the install date. That’s the only way to get a heavy gate right the first visit.
For a closer look at how we approach this work, see our Gate Installation team’s full process. And for everything specific to this area, our Gate Installation in Rendon page covers local conditions in detail.
Gate Opener Installation in Rendon
Gate opener installation in Rendon usually means matching a new operator to a heavy custom gate, and the work runs from $2,200 to $6,500 including the operator, mounting, safety photocells, and setup. On the acreage lots along Blue Mound Road and Rendon Road, we commonly install underground or ram-mounted operators because the gates are heavier than what a standard suburban arm can handle without strain.
The soil here is the reason we won’t quote an opener without looking at the posts. Black-gumbo clay swells in spring and shrinks in a drought. If the hinge post has moved even a quarter inch, a new operator inherits a binding gate and fails early. We check post plumb before we recommend any opener.
Heavy-Duty Operators for Custom Gates
A wrought-iron swing gate with 400 or 500 pounds of steel needs an operator built for that load. We size the motor to the gate weight and cycle count, then set the travel limits, the force sensitivity, and the slow-down zones so the leaf doesn’t slam into the stop or creep open in a north wind.
Underground Operator Systems
For homeowners who don’t want a visible arm or ram on a bespoke gate, we install underground operators that sit below grade in a sealed box. The tradeoff is excavation and drainage; the benefit is a clean look where the gate seems to move on its own. We quote these honestly, with the trenching and drainage work spelled out line by line.
Gate Fabrication in Rendon
Gate fabrication in Rendon is where custom work starts, and a custom-welded ornamental gate here typically runs $3,500 to $12,000 before automation, depending on steel weight, panel height, finial detail, and whether we’re matching an existing fence or designing from scratch. The job involves measuring the opening, drawing the panel, fabricating the frame and pickets, then finishing with primer and paint or a powder coat.
Most Rendon fabrication jobs are matched to the house. A 2010s estate on a two-acre lot off County Road 528 wants an iron gate that echoes the roof line or the fence spears. A ranch property wants a pipe gate that a horse can’t push through and a truck can’t bend. We build both.
Custom Ornamental Iron Gates
We weld every frame in-house to your opening dimensions, not a modular kit. That means the picket spacing, the arch or straight top rail, the latch plate, and the hinge barrel all fit your existing posts exactly. For high-end Rendon properties, this is the difference between a gate that looks like it belongs and one that looks bolted on.
Heavy Pipe and Ranch-Style Gates
On working acreage, we build gates from schedule-40 steel pipe with welded cross-bracing and pinned hinges that let the gate swing without dragging. We set the posts deeper than a handyman would and bell the concrete at the bottom so the gate holds its line through a wet spring.
Trusted Brands We Service in Rendon
We’re factory-trained on the openers families around Rendon actually have: LiftMaster, Linear, DoorKing, and Ghost Controls are the ones we see most often on acreage gates. We keep common Linear and DoorKing boards and remotes stocked locally so a failed opener on a Rendon property doesn’t mean waiting a week for a part. If your gate runs on Viking or FAAC, we can source components fast and install them to spec.
Common Gate Installation Problems We See in Rendon Homes
- Post heave from black-gumbo clay. The Vertisol soil along Rendon Road swells so much in spring that posts set in shallow concrete tilt within two or three seasons. A heavy ornamental gate then binds, the opener strains, and the whole system works against itself. Deep, bell-bottomed footings are the fix, and we quote them as standard on this soil.
- Operators sized wrong for the gate weight. A builder installs a light suburban opener on a 500-pound custom iron gate, and the motor burns out or the gear strips within a year. We match the operator to the actual gate weight and cycle count, not a best guess.
- Underground systems that weren’t drained. We see underground operator boxes in Rendon that fill with water after a hard rain because the install skipped drainage gravel or a weep line. Water kills the motor, and the gate stops mid-travel. We build the box with drainage from the start.
- No entrapment protection on an older gate. Many older automatic gates in Rendon lack safety photocells, so a child or animal in the gate’s path won’t stop or reverse the leaf. Every new install we do includes photocells and obstruction sensitivity set to current standards.
Pricing for Gate Installation in Rendon, TX
Here’s what Rendon homeowners can expect, in plain numbers:
- Basic single swing gate, steel or aluminum frame, manual operation: $2,800-$6,000
- Custom ornamental iron swing gate, fabricated and installed: $3,500-$12,000
- Sliding gate, track or cantilever, on an acreage driveway: $5,000-$14,000
- Full automatic system with operator, photocells, keypad and two remotes: $2,200-$6,500 added to the gate cost
- Post re-setting with deep bell-bottom footings (common in Rendon clay): $900-$2,400 per post
The spread comes from gate width, steel weight, finish, and whether we’re building new posts or working with what’s there. You’ll get a written price before we touch anything, with each line item broken out. Estimates are free. Call (626) 649-4572 and we’ll schedule a measure.
We Also Serve Cities Near Rendon
Beyond Rendon, our gate installers cover the north Texas corridor from Rendon out to the larger metro areas: Houston, San Antonio, Dallas, and Fort Worth. The clay and the weather change a little across that range, but the standard of work doesn’t.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Rendon
No city permit is required because Rendon is unincorporated Tarrant County, but your installation still has to meet Tarrant County regulations on setbacks, clearances, and automated gate safety. We handle the county compliance side as part of every install, and we’ll tell you up front if anything on your property needs attention before the gate goes in. Call (626) 649-4572 and we’ll walk the site with you and explain what’s required.
Because Rendon’s black-gumbo clay expands when it’s wet, which pushes shallow gate posts out of plumb. The hinge post tilts, the heavy leaf drops a little, and the gate either drags on the latch side or binds at the hinge. The permanent fix is re-setting the post in a deep, bell-bottom footing, sometimes with helical piers if the soil is particularly expansive. We see this exact problem on Rendon Road and Blue Mound Road every wet spring.
Yes, provided we size the operator to the gate’s actual weight and mounting geometry. A heavy ornamental gate needs either a ram-style articulated arm or an underground operator, not a light residential arm. We measure the leaf, calculate the load, and install the right opener with slow-down settings and proper limit controls so the gate cycles smoothly. Call (626) 649-4572 for a site measure and a written quote.
At minimum, a new automatic gate in Rendon should have monitored safety photocells that reverse the gate if a person, pet, or vehicle breaks the beam, plus adjustable obstruction sensitivity so the motor stops if it meets resistance. We install both on every automated gate, along with an audible alarm if the gate is left in a manual release mode. It’s standard, not an add-on.
Mostly by controlling post movement before it starts. We set hinge posts in deep bell-bottom footings, use heavy-gauge hinges with bronze or sealed bearings, and mount the operator so it isn’t levering against a shifting post. The gate is then balanced and the travel limits dialed in so the leaf doesn’t slap the stop. That combination keeps a heavy ornamental gate silent through the wet-dry cycle of Rendon’s clay.
If you’re ready for a new gate, an opener, or just a straight answer about what your existing gate needs, call us at (626) 649-4572. We’ll schedule a free on-site measure, hand you a written price, and leave your property cleaner than we found it. That’s the Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Rendon since the Cedarwell family began gate work here in 2009.