Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Rendon
Gate repair in Rendon comes down to two things: knowing how black-gumbo clay moves posts out of plumb, and knowing which older operators are worth saving. Most repairs we handle in Rendon run between $180 and $480 when we can address the hinge, post, or control board on the first visit. If you’re off Rendon Road or Blue Mound Road with a gate that binds or an opener that faults mid-travel, call us at (626) 649-4572 and a live person will answer, day or night. We’ll give you a written price before any work starts, and that price won’t change unless you approve it first.
Why Latch & Post Gate Repair Is Rendon’s Preferred Gate Repair Company
Cody Beckman leads our team, and he’s built it around one idea: a gate company should leave your property the way it found it, only with a gate that works. That’s why every tech who drives out to Rendon carries shoe covers and drop cloths as standard equipment, not as an upsell. Before anyone steps inside your home to access a control panel or keypad, floors get covered and boots get covered. After the work’s done, we send you a photo of the clean-up. It’s a small thing that most gate companies never think to do.
The other thing Rendon homeowners tell us they appreciate is the straight answer on price. You get a written quote before any work begins, every single visit. No pressure, no “while we’re here” add-ons. And because we’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, the right fix usually happens on the first trip. When it doesn’t, the 365-Day Done Right Promise means we come back and make it right. No argument, no fine print.
We also know Rendon’s gates better than most. This isn’t a suburb where every house has the same package gate. One street may have a 25-year-old pipe swing gate on an equestrian spread, and the next property over has a custom iron sliding entry installed five years ago. Our dispatch is coordinated from the Dallas-Fort Worth office, and crews serve Rendon directly, so the tech who arrives has already dealt with both worlds.
Iron Gate Repair in Rendon
Iron gate repair in Rendon usually means one of three things: a weld that’s cracked, a hinge that’s sagged, or a post that’s moved in the clay. Ornamental iron gates on the larger estate lots off Rendon Road are heavy, and when a post shifts even half an inch, the gate panel starts dragging on the latch side or binding against the opener. We repair what’s serviceable: grind and re-weld cracked joints, replace worn hinge barrels, and re-set posts when the footing’s failed. A typical hinge or realignment repair runs $220 to $390. Full post re-setting with a deeper footing starts around $450 and goes up depending on gate weight and access.
Weld and Rust Repair
Older iron gates in Rendon take a beating from humidity and occasional ice storms. Rust starts where the finish has worn thin, and welds crack under repeated thermal cycling. We grind out the bad material, re-weld, and treat the area so the repair doesn’t rust out again in two years. On ornate panels, we take care to match the surrounding work so the repair doesn’t scream at you from the driveway.
Gate Realignment
A gate that drags or won’t latch isn’t always broken. Often the panel is fine and the post has simply leaned. That’s the black-gumbo story: clay swells in spring, shrinks in summer, and posts set shallow slowly walk out of true. We re-plumb the post or adjust the hinge shims, then reset opener travel limits so the system stops fighting itself. Most realignments run $180 to $320, assuming the post itself is still sound.
Sliding Gate Repair in Rendon
Sliding gate repair in Rendon often starts with a wheel or track problem on older pipe gates, or a gear-rack issue on newer cantilever and V-track systems. When a wheel bearing goes flat, the gate drags and the opener pulls harder until something faults. We replace wheels, rollers, and V-track sections, and we check the rack-and-pinion alignment on automated sliders. Typical repairs run $250 to $450 for wheel or roller work; replacing a damaged rack section or a badly worn track can run $500 to $800, and you’ll see the exact figure in writing before we start.
Track and Roller Service for Ranch Gates
The heavy pipe sliders on Rendon’s older equestrian parcels are workhorses, and their moving parts wear. Flat spots on wheels chew up track, and once the gate starts bouncing, the posts take lateral loads they were never built for. We carry the common wheel and bearing sizes for ranch and pipe gates, so we can often finish the job in one visit.
Cantilever and V-Track Repair
Newer estate sliders off Blue Mound Road often use cantilever or V-track designs that keep the track clear of mud and grass. When they bind, it’s usually a roller bearing or an alignment issue in the panel itself. We square the panel, replace seized rollers, and set the opener limits so the gate doesn’t slam at either end of travel.
Trusted Brands We Service in Rendon
Most Rendon gates are controlled by a handful of brands, and we’re factory-trained on the ones families actually own. Viking and Ghost Controls show up frequently on swing gates; DoorKing and Elite are common on the larger sliding entries. When a control board fails, we don’t have to order from a catalog and make you wait a week. We stock common boards and safety components for these brands, which means faster turnaround for Rendon customers. If your opener is from a brand outside that short list, ask us anyway, chances are we’ve serviced it.
Common Gate Repair Problems We See in Rendon Homes
- Posts heaved out of plumb. The expansive clay under Rendon swells with spring rain and shrinks in summer heat. Posts set without deep footings twist or lean within two to three years, which throws swing panels out of alignment and strains automatic openers. Re-setting the post on a proper footing is the long-term fix.
- Legacy control boards going obsolete. Many 1990s and 2000s estate gates around Rendon still run original operators whose control boards are no longer made. The gate panel and hinges may be perfectly fine, but the board faults and the opener quits. Sometimes a retrofit board works; other times a new operator is the cheaper decision.
- Ice storm damage to welds. North Texas ice storms hit the Rendon corridor roughly every other year. Freeze-thaw cycles crack weld joints on older pipe and ranch gates, and the extra weight of ice stresses automatic openers. We see a spike in weld breaks and stripped gears every February and March.
- Hinge and latch wear on ranch gates. The heavy pipe gates on Rendon’s equestrian spreads wear hinge posts and latches hard. A gate that’s been swinging for 25 years has slop in every joint, and the latch side often drags. We re-bush hinges and replace latch assemblies so the gate closes like it should.
Pricing for Gate Repair in Rendon, TX
Most standard gate repairs in Rendon run between $180 and $480. A hinge replacement or minor realignment starts around $180. Weld repairs on cracked iron panels range from $220 to $390 depending on how much material needs to be replaced. Post re-setting, which is the most common major repair on Rendon’s clay soils, starts around $450 and can reach $900 for heavy automated gates that require equipment to lift. A full operator replacement, including the unit and labor, typically runs $800 to $1,500 for residential gates. You’ll get a written price before any work begins, and we’ll explain exactly what’s included. Estimates are free, and the price is agreed before we touch anything.
We Also Serve Cities Near Rendon
Our Gate Repair team works throughout the Dallas-Fort Worth area, and we regularly take calls from homeowners in Houston, San Antonio, Dallas, and Fort Worth. If you’re outside Rendon but need the same straight pricing and clean-work routine, call (626) 649-4572 and we’ll get you scheduled.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Rendon
It depends on the fault. If the control board has failed on a 1990s or 2000s unit, the board may be obsolete and a new opener is often the cheaper answer. If the fault is from a binding gate, a misaligned limit, or a weak battery, repair makes sense and typically runs $180 to $350. We’ll diagnose it and tell you straight whether a repair is worth it or if replacement is the smarter spend. Call (626) 649-4572 and we’ll walk through what you’re seeing.
No municipal gate permit is required for gate repair in Rendon because it’s unincorporated Tarrant County, not a city like Mansfield or Burleson. But post footings and electrical work still need to meet county regulations, and that distinction trips up contractors who only know city codes. If we re-set a post or run new power to an opener, we do it to county standard so you don’t get a surprise later. Call (626) 649-4572 with questions – estimates are free.
In Rendon, the usual culprit is the black-gumbo clay. It swells with spring rain and shrinks in summer drought, and that repeated movement slowly pushes shallow-set posts out of plumb. Each season the gate drags a little more or binds a little harder. The permanent fix is to re-set the post on a deeper footing, which runs from $450 to $900 depending on the gate’s weight and access. Call (626) 649-4572 for a written quote.
Yes, and on older Rendon gates it’s a smart move. We can add photo-eyes, edge sensors, and auto-reverse to gates that predate current safety standards, so long as the operator can support them. On an acreage property off Blue Mound Road, we recently repaired a 1990s swing gate by re-setting the heaved hinge post and resetting the travel limits, then verified the safety photocells. The original LiftMaster operator ran clean again, no replacement needed. Call (626) 649-4572 to find out what your gate can take.
Usually not. A sagging gate in Rendon is most often a hinge-post problem, not a panel problem. The post leans or the hinge barrels wear, and the gate panel drops on the latch side. We fix the underlying post or hinge issue rather than band-aiding the panel, and most corrective work runs $220 to $450. Call (626) 649-4572 and we’ll tell you what’s actually wrong.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Rendon since 2009.