Gate Installation in Palm Beach - Free On-Site Survey, Written Price

Fast, Reliable Gate Installation Across Palm Beach

Gate Repair - Palm Beach carries a set of conditions most mainland contractors never plan for: salt-laden air attacking from both the Atlantic and the Intracoastal, ARCOM design-review requirements on many estates, and hardware that corrodes years faster than anything inland. We plan for all of it before the first post hole is dug. Our crews know the difference between what survives on Ocean Boulevard and what fails on North County Road, and we spec materials accordingly. Call (626) 649-4572 for a written price before any work begins.

Call (626) 649-4572

You want a gate that opens smoothly, holds its line, and doesn’t sag after two seasons of salt air. That’s the job we focus on. Gate Installation is one of three services Latch & Post handles exclusively, alongside gate repair and electric gate repair. We’re not a general handyman service stretching into gates on the side. Every gate comes down to two parts: the latch that holds it and the post that carries it. In Palm Beach, the post is usually the first thing to fail.

Key Takeaways

• Palm Beach’s barrier-island location means salt air attacks gate hardware from two directions at once, so material specification matters more here than almost anywhere else in South Florida.
• Many Palm Beach estates require ARCOM approval before a gate replacement or alteration, which adds a regulatory step that doesn’t exist in West Palm Beach.
• Every job includes a written price before work starts, shoe covers and drop cloths inside the home, and a cleanup photo before we leave.
• A live person answers our phone 24/7, including nights, weekends, and holidays.

Why Latch & Post Gate Repair Is Palm Beach’s Preferred Gate Installation Company

We’ve been installing and repairing gates since 2009, first through the Cedarwell family of gate specialists and now as Latch & Post Gate Repair. The work here is different from mainland work. Palm Beach estates sit on a barrier island roughly a mile wide, which means every gate gets hit by salt-laden moisture from both the ocean side and the Intracoastal side. A standard galvanized hinge that lasts 15 years in Greenacres might seize in 5 years on South Ocean Boulevard. We spec for that reality from day one.

Our technicians are background-checked and uniformed, and they work to the Cedarwell C.A.R.E. values on every job: clean up like it’s our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work. If you have kids asleep or a dog that startles easily, we can schedule around it. We carry pet-safe lubricants where there’s a choice. And before we step inside any home, we put on shoe covers and lay drop cloths on the floor. You’ll get a photo of the cleanup before the crew leaves.

Cody Beckman leads our team, and he’s built the company around a simple promise: every repair and installation carries the 365-Day Done Right Promise. If something isn’t right, Latch & Post makes it right. No argument, no fine print. That matters on an island where a spec’d-wrong hinge can seize within two years. Scheduling for Palm Beach is coordinated from our Miami office, and our crews regularly work the estates along Ocean Boulevard, North County Road, and the streets around Phipps Plaza.

Driveway Gate Installation in Palm Beach

Driveway Gate Installation in Palm Beach usually means one of two things: replacing a corroded or storm-damaged gate on an older estate, or installing a new automated system on a freshly built property along Ocean Boulevard or North County Road. Most standard single driveway gate installations in Palm Beach run between $4,800 and $11,000, depending on width, material, and whether the existing posts can be reused. Larger double gates and custom wrought-iron designs start around $9,000 and go up from there. You’ll see the exact number in writing before we touch anything.

The salt-air environment changes the material conversation. A painted steel gate that looks fine for the first year will start showing rust at the welds and hinge points by year three if the frame wasn’t hot-dip galvanized first. We recommend aluminum or hot-dip galvanized frames with 316 marine-grade stainless hinges and fasteners for any driveway gate within sight of the water. That’s not upsell; it’s the difference between a gate that lasts and one that needs major work before the paint warranty expires.

Material Selection for Coastal Exposure

Every Palm Beach driveway gate should be thought of as a marine application. 316 stainless is the standard we use for hinges, pins, and fasteners because 304 stainless and standard galvanized hardware will still pit under dual salt exposure. For the frame and panel, powder-coated aluminum or hot-dip galvanized steel both hold up well. We quote both options and walk you through the tradeoffs, including weight, appearance, and how the gate behaves in a storm.

Automation and Access Control

Most driveway gates in Palm Beach are automated, and the operator’s control board is the component most likely to fail from airborne salt. We install operators in sealed or vented enclosures where possible and recommend boards rated for coastal exposure. For estates with staff, we also integrate keypads, phone-based access, and intercom systems so deliveries and visitors can be managed without someone walking to the gate. Every automated installation includes a UL 325 entrapment protection test before we leave.

Sliding Gate Installation in Palm Beach

Sliding Gate Installation in Palm Beach tends to show up on narrower lots or estates where a swing gate would block the driveway or encroach on landscaping. A sliding gate rides on a track or cantilever system instead of hinging from a post, and that changes the failure points: track debris, roller wear, and motor strain. Typical sliding gate installations in Palm Beach run from $5,500 to $13,000, with the higher end reflecting custom panels, longer spans, or integrated access control. The written quote covers every part of the job before work begins.

Salt air still finds its way into the operator and the track hardware. We’ve replaced rusted track sections on gates less than five years old because the installer used galvanized bolts that couldn’t handle the Intracoastal side’s constant moisture. Details like that are why we spec 316 stainless hardware on every sliding gate we install in Palm Beach, even when the gate sits well back from the waterline. The air carries salt further than people expect.

Cantilever vs. Track Systems

Cantilever sliding gates don’t need a track across the driveway, which means less debris collection and fewer corrosion points at ground level. They cost more upfront but require less maintenance in Palm Beach’s sandy, salty environment. Track systems are less expensive and work well on shorter spans, but the track needs regular cleaning and the rollers should be stainless. We’ll recommend the better fit for your driveway width and drainage rather than defaulting to whichever is easier to sell.

Drainage and Post Footings

Palm Beach’s sandy soil drains fast, which is good for post longevity, but it also means footings need proper depth and anchorage. We dig footings below the local scour line and anchor posts into concrete that’s rated for the wind loads on this side of the county. A storm-surge or hurricane-rated anchor detail can be the difference between a gate that’s still standing after a storm and one that’s leaning across the driveway.

Trusted Brands We Service in Palm Beach

Our technicians are factory-trained on the brands Palm Beach homeowners actually have, including Viking, Ghost Controls, and DoorKing. That means when a board goes out or an operator loses its limits, we can diagnose and often fix it on the first visit rather than ordering parts and coming back a week later. We stock common boards, remotes, photo-eyes, and hinge kits for these brands locally, which shortens downtime for Palm Beach customers. Elite and other brands are covered too, but Viking, Ghost Controls, and DoorKing show up most often in the estates we service around the island.

Common Gate Installation Problems We See in Palm Beach Homes

• Hinge posts rotted at grade. Sand and salt-laden moisture collect around the base of the post, and the steel corrodes inside the concrete footing. The gate starts sagging even when the panel itself is straight. The fix has to address the post and footing, not just the hinge.
• Operator control boards oxidized from two-sided salt air. The low-voltage circuits inside the board short out after a few seasons, leaving an automated driveway gate dead. A sealed enclosure buys time, but the board has to be coastal-rated from the start.
• Storm-damaged gates that need ARCOM approval before replacement. If your gate is on a prominently visible or landmarked estate, the Town of Palm Beach may require architectural review. Out-of-town contractors don’t know to check, and the job stalls for weeks.
• Wrong fasteners causing premature rust. Standard galvanized bolts look fine for a year and then bleed rust streaks down the gate face. On a block with eighteen other estates, that’s the kind of detail neighbors notice. We use 316 stainless so it doesn’t happen.

Pricing for Gate Installation in Palm Beach, FL

We Also Serve Cities Near Palm Beach

If you’re across the bridge in West Palm Beach, up the coast in North Palm Beach or Palm Beach Gardens, or inland in Greenacres, we handle gate installation there too. The salt-air exposure on the island is unique, but the same care routine goes with us: written pricing, shoe covers, drop cloths, and a cleanup photo on every visit. Gate Installation in Palm Beach is our main island service area, and we’ve been working these streets long enough to know what holds up.

FAQs About Gate Installation in Palm Beach