Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across West Palm Beach
Gate installation in West Palm Beach means building for salt air, saturated ground, and wind. A new gate here has to hold up against corrosion from the Intracoastal Waterway, footings that shift after tropical rains, and panels that catch a lot of force in a storm. Our crews serve West Palm Beach homes and HOAs directly, with a written price before any work starts and a live person answering calls around the clock at (626) 649-4572.
Why Latch & Post Gate Repair Is West Palm Beach’s Preferred Gate Installation Company
West Palm Beach is dense with gated communities, from the older estate neighborhoods like Flamingo Park and El Cid to the sprawling HOA subdivisions off Okeechobee Boulevard and Forest Hill Boulevard. We work across all of it, and our Gate Repair in West Palm Beach team knows what fails here. The dual salt-air exposure, from the Intracoastal on one side and Atlantic breezes over Palm Beach island on the other, corrodes gate hardware faster than almost anywhere else in Florida. That changes what we install and how we install it.
As part of the Cedarwell family and operating since 2009, Latch & Post Gate Repair focuses only on gates: gate repair, gate installation, and electric gate repair. We are not a general handyman service. Our technicians are background-checked and uniformed, trained on the brands Florida homes actually run: Viking, Ghost Controls, DoorKing, Elite, and others. Every installation is covered by the 365-Day Done Right Promise. If it is not right, we make it right. No fine print.
For West Palm Beach residents, the process is specific and simple. You call, a live person answers, we schedule a measure, and you receive a written price before any work begins. Clean floors matter to you, so we put down drop cloths and wear shoe covers inside your home, and we send you a photo of the cleanup before we leave. That is the Cedarwell Care Promise, and it is included on every visit.
West Palm Beach residents keep coming back because the work holds up, the price is quoted before the work begins, and the crew leaves the property clean. Gate Installation work here never starts with a vague estimate. It starts with a number on paper.
Driveway Gate Installation in West Palm Beach
Driveway Gate Installation in West Palm Beach usually means either a swing gate on a masonry pillar, common in Flamingo Park and El Cid, or a slide gate on a track, common in the HOA communities off Southern Boulevard and Jog Road. A typical driveway gate installation in West Palm Beach runs $2,400 to $6,800 depending on gate length, weight, and whether you need a new operator, keypad, and safety sensors. A double gate adds $800 to $1,600 over a single of the same style because of the extra hardware and bracing.
Wind Load and Panel Choice
Solid infill panels catch a surprising amount of wind. A 12-foot solid driveway gate can act like a sail in a tropical storm, and if the post footings are shallow or already saturated, the whole assembly can lean or fail. We size the posts and footings to the wind exposure, not just the gate weight.
Operators and Access
Most West Palm Beach driveways get a swing or slide operator from LiftMaster, Viking, or DoorKing, plus a keypad or vehicle sensor. Where kids and pets are present, we set the safety photo eyes and reverse sensitivity carefully, then walk you through the release procedure so you can open the gate by hand if the power drops.
Sliding Gate Installation in West Palm Beach
Sliding Gate Installation in West Palm Beach is the most common choice for HOA entrances and longer driveways where a swing gate would need too much clearance. The gate rolls on a track or cantilever system, which saves space and handles longer spans better. A typical sliding gate installation in West Palm Beach runs $3,000 to $8,500. The range depends on whether it is a chain-driven track system or a cantilever, plus the operator brand and access controls.
Track Prep in Sandy, Waterlogged Soil
Sliding gates need a level, well-drained track bed. West Palm Beach soil can hold a lot of water after heavy rain, and a track set on shifting or saturated ground will bind and burn out the operator motor. We excavate and compact a proper base before setting the track, and we check drainage so the wheels are not sitting in standing water.
Corrosion-Resistant Hardware
Because salt air attacks steel quickly near the coast, we specify galvanized or stainless rollers, hinges, and fasteners on slide gate installs here. That is standard for our West Palm Beach work; we do not install raw steel hardware knowing it will be rusted in three years.
Trusted Brands We Service in West Palm Beach
We install and service the gate brands already common across Palm Beach County. Viking and DoorKing operators show up constantly on HOA entrances along Southern Boulevard and Jog Road, and we are factory-trained on both. Ghost Controls and Elite appear frequently on residential driveway gates in neighborhoods like Flamingo Park and El Cid. We carry common boards, remotes, and safety sensors for these brands, so West Palm Beach customers get faster turnaround without waiting a week on a part. If your existing gate is LiftMaster, FAAC, BFT, or Linear, our Gate Installation team can integrate the new gate with your current operator where it makes sense.
Common Gate Installation Problems We See in West Palm Beach Homes
- Salt corrosion on hinge posts and weld points. The dual salt-air exposure from the Intracoastal and Atlantic eats through uncoated steel quickly, so we see gates rusting at the bottom hinge and welds failing within a few years.
- Posts shifting in saturated ground. After tropical systems saturate the soil beneath footings, posts lean and gates sag. The panel usually gets blamed, but the footing is the actual problem.
- Fried operator boards after storms. Power surges and water intrusion short out Viking and LiftMaster control boards, leaving HOA entrances locked open or shut for days.
- Undersized footings on solid gates. Older West Palm Beach properties often have shallow footings sized for a light gate. When a heavy solid infill gate goes up without re-pouring the footing, the post moves within a year.
Pricing for Gate Installation in West Palm Beach, FL
A standard single driveway gate in West Palm Beach typically runs $2,400 to $4,900 including the operator and basic access controls. A sliding gate for an HOA entrance runs $3,000 to $8,500. Double gates add $800 to $1,600. The main cost drivers here are gate size, wind exposure, whether the existing posts and footings need to be re-poured, and operator brand. Extra access systems, like card readers or vehicle loops, add $500 to $1,200 per lane. We give you a written price before any work starts, always. If the scope changes during the job, you will approve the number before we proceed. Call (626) 649-4572 for a free measure and quote.
We Also Serve Cities Near West Palm Beach
Our West Palm Beach crews also cover Palm Beach, Greenacres, North Palm Beach, and Palm Beach Gardens. If you are just across the county line or near a neighboring HOA community, we are still local to your gate. Scheduling is coordinated from our Miami (South FL) office, with crews serving West Palm Beach directly.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in West Palm Beach
Every automatic gate has a manual release, usually a keyed or pull-type mechanism on the operator. For slide gates, the release disengages the motor so you can push the gate by hand. For swing gates, the operator arm unlocks from the gate. If you have not found yours, call us at (626) 649-4572 and we will walk you through it over the phone. After any new installation, we show whoever is on site exactly how to release the gate, because in West Palm Beach a power cut after a storm is a real possibility, not a hypothetical.
West Palm Beach sits between the Intracoastal Waterway and the Atlantic, so the air carries salt from both sides. Galvanic corrosion attacks steel hinges, weld points, and motor housings much faster than inland cities, where there is only one coastal influence or none at all. That reality changes our material selection on every install: galvanized or stainless hardware, proper coatings on posts, and sealed motor enclosures where the design allows.
It depends on the footings, the panel design, and the hardware. A gate with deep, properly poured footings and reinforced posts can ride out most storms. A solid infill panel on shallow footings in saturated ground can lean or fail. Before any tropical system, we recommend a visual check of the posts, hinges, and track, plus verifying the manual release works. We can inspect and harden your gate before the season turns, and we are available around the clock when a board fries mid-storm.
Usually the sag is the hinge post moving, not the gate panel failing. In West Palm Beach, salt corrosion at the hinge welds and waterlogged soil under the footing are the two most common causes. We repair the root problem: re-pour the footing, reset the post, or replace the corroded hinges. Replacement only makes sense when the panel itself has rusted through or the frame is structurally compromised. We will give you a written price for either path before we start.
Yes. Any powered gate in Florida needs entrapment protection, which means photo eyes or contact edges that stop and reverse the gate if something is in the path. That protects kids, pets, and vehicles. We install UL 325 compliant sensors on every powered gate, and we test the reverse sensitivity before we leave. It is not an optional add-on; it is part of a safe installation.
Key Takeaways
- Driveway gate installation in West Palm Beach typically costs $2,400 to $6,800.
- Sliding gate installation for HOAs typically costs $3,000 to $8,500.
- Salt air from the Intracoastal and Atlantic corrodes hardware faster here than inland.
- Post footings fail in saturated ground after tropical systems, not just the gate panel.
- Written price before work starts, shoe covers and drop cloths on every visit, and the 365-Day Done Right Promise.
If you have a gate that needs replacing, or you are planning a new installation in West Palm Beach, call us at (626) 649-4572. A live person answers, we schedule a measure at a time that suits your family, and you will have a written price before any work begins. We will protect your floors, respect your quiet hours, and show you the cleanup photo before we leave.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving West Palm Beach since 2009.