Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Old Fig Garden
Most gate installation in Old Fig Garden starts underground, not at the gate panel. The neighborhood’s mature fig and valley oak trees have spent decades pushing roots under brick pilasters and concrete pads, which means a gate that looks perfectly level can still drag, bind, or refuse to latch. We start every Old Fig Garden job by checking what’s happening beneath the post before we quote a single dollar. Call (626) 649-4572 and we’ll come look.
Old Fig Garden isn’t a typical Fresno subdivision. The homes here were built between the 1920s and 1950s, and many still carry their original ornamental ironwork. That changes how installation should be done. A gate that gets bolted to a heaved footing will be crooked again within a year. Matching the period hardware matters just as much as setting the post. We’ve learned that over hundreds of visits to this neighborhood, and it shapes everything about how we approach a new gate here.
Why Latch & Post Gate Repair Is Old Fig Garden’s Preferred Gate Installation Company
We’re a Cedarwell-family gate specialist, not a general contractor who happens to hang gates. Gate installation is one of the three things we do, and that focus shows up in the details Old Fig Garden homeowners notice: written pricing before work begins, shoe covers and drop cloths on every visit, and a photo of the cleanup before our technician leaves. The Cedarwell C.A.R.E. values aren’t a poster on a wall. They’re how our crews operate on your driveway, in your yard, and at your front entry.
Cody Beckman leads our team, and he’s built the company around a simple rule: every gate comes down to two parts, the latch that holds it and the post that carries it. Get those right and everything else follows. Our background-checked, uniformed technicians are factory-trained on the brands families in this neighborhood actually own: Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, and the others you’ll find on original estate gates across Old Fig Garden. When you call (626) 649-4572, a live person answers. That’s true at 2 p.m. and at 2 a.m., weekends and holidays included.
Every installation carries the 365-Day Done Right Promise. If something isn’t right, we make it right. No argument, no fine print. That promise means more on a 90-year-old wrought-iron driveway gate than it does on a new build, because period hardware doesn’t always cooperate on day one. We stand behind the work for a full year.
Gate Fabrication in Old Fig Garden
Gate Fabrication in Old Fig Garden usually means one of two things: building a new gate from scratch that matches a 1920s or 1930s architectural style, or rebuilding and extending an original iron or wood gate that’s too far gone for a hardware repair. Most Old Fig Garden jobs involve replacing rotted bottom rails on wooden gates, sourcing period-appropriate strap hinges and pintles, or fabricating custom iron panels that echo the original scrollwork and proportions. The work is measured, not rushed, and you’ll receive a written price before anything is cut or welded.
Period Iron and Wood Matching
We’ve fabricated gates for Mediterranean Revival homes off Van Ness Boulevard where the original iron had rotted through at the welds. Matching that work means more than painting something black. The scroll dimensions, the bar thickness, the way the pickets taper at the top, the patina: these details are part of what makes Old Fig Garden look like Old Fig Garden. Our fabricators source and shape material to match the surviving original sections, and we can refinish vintage pivot sockets rather than replacing them with modern equivalents that look wrong.
Setting Posts That Stay Put
Every fabricated gate needs a footing that can handle what the old fig trees will do to it. Where roots have already heaved brick pilasters, we typically re-cast the post footing with a root barrier before hanging anything new. That costs more than a simple post set, but it’s the difference between a gate that works for 10 years and one that starts sagging in two. A typical custom pedestrian gate in Old Fig Garden runs $1,600 to $4,200 depending on size, ironwork detail, and what the footing needs. Driveway gates run $4,500 to $12,000 or more for double-leaf ironwork matched to the home’s original style.
Automatic Gate Installation in Old Fig Garden
Automatic Gate Installation in Old Fig Garden means pairing modern operators with gates that were never designed for them. Many of the neighborhood’s original swing gates are heavy, single-panel wrought iron on vintage pintles. Our job is to figure out whether the existing hinges can handle motorized operation, whether the post needs reinforcement, and which operator will move the gate smoothly without fighting the thermal expansion of Fresno’s 105-degree summers. We quote the full job, including power, safety, and the operator itself, before any work starts.
Operators for Vintage Swing Gates
A modern automatic gate operator can absolutely work on a heavy vintage swing gate. It requires a post that’s solid and true, hinges that can take the repeated load, and an operator sized correctly for the gate’s weight and leaf length. We stock and install operators from LiftMaster, Viking, DoorKing, Elite, and FAAC, and we’ve paired them with 60-year-old iron panels on multiple Old Fig Garden estates. The goal is an operator that’s strong enough to move the gate but tuned so it doesn’t slam or strain the old hardware. Safety photocells and proper travel limits are standard on every automatic installation.
Underground and Overhead Choices
Some Old Fig Garden driveways call for an underground operator, particularly where an overhead arm or swing ram would interrupt the sightlines of a formal entry or where a masonry pier has no room for surface mounting. Underground operators cost more, typically $2,800 to $6,500 for the operator and installation alone on top of gate and post work. They hide the mechanism entirely and are a good match for estate entries. Where budget or driveway slope makes underground less practical, we recommend a ram or worm-drive operator, which starts around $1,800 installed.
Trusted Brands We Service in Old Fig Garden
We’re factory-trained on the brands Old Fig Garden homes actually use. Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule all appear on gates in this neighborhood, from original 1930s ironwork retrofitted with a modern Viking operator to newer estates running Ghost Controls on side-yard pedestrian gates. We keep common parts in stock for these brands, which means a failed DoorKing control board or a seized Elite hinge often gets repaired on the first visit, not after a week waiting on a freight shipment. That matters when your driveway gate is your only way in and out.
Common Gate Installation Problems We See in Old Fig Garden Homes
- Root heave at the post footing. Mature fig and valley oak roots lift the concrete pad or brick pilaster under the hinge post, which makes a gate that looks fine up top drag at the latch side. We probe footing stability before touching any hinge or latch hardware.
- Rust-cycled welds and frozen pivot sockets. Original wrought-iron gates from the 1920s through the 1950s absorb decades of tule fog moisture, and the welds and hinges quietly rot from the inside. A gate that’s “suddenly” hard to open usually failed slowly over years.
- Heat-cracked rollers and seals. Fresno summers over 105 degrees cause thermal expansion stress on nylon rollers and rubber seals in gate operators. We see operators on otherwise sound gates fail in August because a $12 roller finally gave out.
- Rotted wood bottom rails. Wooden pedestrian gates from the neighborhood’s original construction era often sit close to irrigated lawns. The bottom rail soaks up moisture, rots, and the gate drops on its hinges. This is a fabrication and replacement job, not a hinge adjustment.
Pricing for Gate Installation in Old Fig Garden, CA
We Also Serve Cities Near Old Fig Garden
Our Old Fig Garden customers often ask us to help family and colleagues nearby. We serve Los Angeles, San Diego, San Jose, and San Francisco with the same care standards, and our Gate Installation team handles every job the same way: written pricing, clean work, and a full-year promise. If you’re in Gate Installation in Old Fig Garden or anywhere nearby, we’re the crew to call.
Serving Old Fig Garden, CA - Our Local Coverage Area
We’re based in the Old Fig Garden area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Old Fig Garden
Root heave is the most common cause in Old Fig Garden. A mature oak or fig root pushes up the footing under the hinge post, and the whole gate settles out of alignment so the latch no longer lines up. You won’t see the problem by looking at the gate itself. We check the post footing first, and the fix is often concrete and root-barrier work rather than a latch adjustment. Call (626) 649-4572 and we’ll diagnose it properly.
Yes. We fabricate pedestrian and driveway gates that match the period ironwork or wood detailing already on your property or on neighbors’ homes along Van Ness Boulevard and the surrounding streets. That includes matching scroll dimensions, bar thickness, picket spacing, and patina. We’ll show you a written quote before fabrication begins, and the work is covered by the 365-Day Done Right Promise.
Usually yes, provided the post is sound and the hinges are rated for repeated motorized load. We’ve paired LiftMaster, Viking, and DoorKing operators with 60-year-old iron gates throughout Old Fig Garden. The installation includes safety photocells and a tuned speed so the old panel doesn’t slam. A free site visit tells us what your hinges and footing can handle.
Fresno summers over 105 degrees crack nylon rollers and rubber seals, and tule fog winters drive moisture into unprotected welds. In Old Fig Garden specifically, decades of rust cycling on original iron hinges leaves the metal brittle and prone to snapping at the weld. We replace worn parts with components matched to the gate’s weight and your property’s exposure, which extends the time between failures substantially.
Yes, more than in any other Fresno neighborhood we serve. The fig and valley oak roots push against post footings, and a new gate installed without addressing that heave will sag within a few years. We build root barriers into new footings where needed, and we check for heave before quoting any installation. It’s a step many gate companies skip, and in Old Fig Garden it’s the difference between a gate that lasts and one that binds.
If your gate is sagging, refusing to latch, or ready for replacement, call us at (626) 649-4572. A live person answers every time, and we’ll schedule a free on-site estimate at your Old Fig Garden home.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Old Fig Garden with the Cedarwell Care Promise since 2009.