Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fulshear, TX
Gate repair in Fulshear comes down to what this city is made of: newer master-planned communities, automated driveway gates on nearly every street, and Fort Bend County clay soil that never quite sits still. When a post shifts or a motor quits, it’s rarely a simple swap. The gate, the operator, the wiring, and the ground under all of it have to work together. Latch & Post Gate Repair focuses on exactly that, with a written price before any work starts and a live person answering at (626) 649-4572, day or night.
Why Fulshear Homes Are Different
Fulshear’s build-out happened fast. Subdivisions like Cross Creek Ranch, Polo Ranch, and Fulshear Lakes compressed thousands of automated residential driveway gates into roughly a ten-year window, between 2013 and 2023. That means a large share of the city’s gate operators are now aging out of warranty at roughly the same time. We see the same few gate hardware specs repeated across whole neighborhoods, because a small number of regional builders used similar equipment. When something fails here, it tends to fail in clusters.
Then there’s the soil. Fort Bend County’s black clay expands when wet and contracts when dry, which pushes gate posts out of plumb over time. A gate that swung cleanly in 2019 may drag or jam by 2025, not because the hinges wore out, but because the post moved a half-inch. Fulshear also sits in the Brazos River floodplain. Homes near the river saw significant flooding during Hurricane Harvey in 2017, and motors, control boards, and underground wiring that went under water are only now showing the long-term corrosion that follows. The humidity alone is enough to shorten the life of circuit boards and fasteners, even in homes that never flooded.
Our Main Fulshear Services
The two calls we get most from Fulshear homeowners are for gates that won’t open or close properly, and for new installations where the old gate has finally reached the end of its life. Each has its own page with the local details that matter here.
Gate Repair in Fulshear
A sagging gate or a latch that won’t catch is the most common repair call in Fulshear, and it’s almost never just one problem. We check the post alignment first, because clay soil movement is the usual culprit, then move to hinges, the latch itself, and any bent or worn hardware. On ornamental iron and aluminum gates, we can often straighten and reinforce rather than replace. You’ll get a written price before we touch anything, and we’ll tell you if a simple adjustment will buy you years. Gate Repair in Fulshear covers the full repair process.
Gate Installation in Fulshear
Installing a driveway gate in Fulshear means starting with the post. In this soil, a post set without proper depth and concrete footing will lean within a few seasons. We dig to the right depth, set the post plumb, and build the gate to hold its line through wet and dry cycles. Whether you’re replacing a Harvey-damaged gate or adding a first gate to a new build, we measure on site, quote in writing, and schedule the work around your HOA’s requirements. Gate Installation in Fulshear explains what a full installation includes.
Electric Gate Repair in Fulshear
Electric gate failures in Fulshear often trace back to the operator, the control board, or the underground wiring. A post-Harvey replacement installed in late 2017 or 2018 is now at the 7 to 8 year mark where brushed DC motor components and boards commonly fail. We carry parts for the brands most common here and diagnose the whole system, not just the symptom. If the issue is a safety sensor or an edge, we fix that. If the board is done, we say so plainly. Electric Gate Repair in Fulshear has the full detail on operators, wiring, and common failure points.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fulshear
We’re factory-trained on the equipment Fulshear homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common FAAC, BFT, Linear, and Viking parts for same-day repairs where possible. For less common boards or motors, we order and schedule the follow-up before we leave. See our brands for the full list.
Pricing for Gate Company in Fulshear, TX
| Service | Typical range in Fulshear |
|---|---|
| Gate latch replacement | $125 - $275 |
| Hinge replacement (per hinge) | $65 - $150 |
| Gate post straightening or reset | $225 - $600 |
| Gate frame repair and realignment | $180 - $450 |
| Driveway gate opener installation | $1,400 - $3,200 |
| Control board replacement | $250 - $700 |
| Safety sensor replacement | $150 - $350 |
| Complete gate and operator installation | $2,800 - $7,500 |
What pushes a job toward the top of these ranges in Fulshear is usually the ground, not the gate. A post that needs to be excavated and reset in clay costs more than a simple latch swap, and a Harvey-era operator with corrosion inside the housing takes longer to diagnose and repair. Whatever the number, you’ll see it in writing and agree to it before any work begins.
Neighborhoods We Serve in Fulshear
We work throughout Fulshear and the surrounding master-planned communities. Our scheduling is coordinated from the brand’s Houston office, and crews serve Fulshear locally, so we can usually reach most neighborhoods the same day for urgent repairs:
- Cross Creek Ranch
- Polo Ranch
- Fulshear Lakes
- Fulshear Run
- Brazos Crossing
Service Area – Cities Near Fulshear
Beyond Fulshear, we also serve homeowners in nearby Fort Bend County communities. If you’re just outside the city limits, we can help in Richmond, TX, Katy, TX, Rosenberg, TX, and Sugar Land, TX. Call and we’ll tell you straight whether we can reach your address.
Serving Fulshear, TX - Our Local Coverage Area
We’re based in the Fulshear area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fulshear
For urgent repairs like a gate stuck open or an operator that won’t respond, we typically reach most Fulshear neighborhoods the same day. Non-urgent work is scheduled at your convenience. Call (626) 649-4572 and a live person will give you a real answer, not a voicemail.
Most Fulshear HOAs have rules about gate style, height, and materials, especially in communities like Cross Creek Ranch. We’ll work with your HOA’s requirements and can provide the specs they need. If approval is required before installation, we’ll factor that into the timeline.
The written price covers the full job: labor, parts, and any cleanup. Shoe covers and drop cloths are included on every visit at no extra charge, and we take a photo of the cleanup before leaving. If something changes during the job, we talk to you first, never after.
If your Fulshear gate is sticking, sagging, or not responding, call Latch & Post Gate Repair at (626) 649-4572 for a free estimate. A live person answers, and the price is in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fulshear Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco