Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fulshear
Gate installation in Fulshear costs between $2,400 and $8,500 for most residential driveway gates, with automatic operators adding $1,800 to $4,500 depending on the motor and access controls. We’re Latch & Post Gate Repair, part of the Cedarwell family of gate specialists, and we’ve worked on gates throughout Cross Creek Ranch, Polo Ranch, and Fulshear Lakes since these neighborhoods first went up. Our crews come from the brand’s Houston office and serve Fulshear locally. If you’re thinking about a new driveway gate, a pedestrian gate, or replacing an operator that’s reached the end of its run, call (626) 649-4572 for a free estimate and a written price before anything starts.
Why Latch & Post Gate Repair Is Fulshear’s Preferred Gate Installation Company
Fulshear homeowners call us because we show up on time, tell you the price before we touch a single bolt, and clean up like it’s our own home. Our technicians are background-checked, uniformed, and trained on the exact brands families in Fulshear actually own: LiftMaster, Viking, Ghost Controls, DoorKing, and Elite, among others. When we step inside your home to run wiring or check a control panel, we put on shoe covers and lay drop cloths. Your floors stay clean. Before we leave, we take a photo of the cleanup. That’s the Cedarwell C.A.R.E. routine, and it’s baked into every visit, not an upgrade.
The 365-Day Done Right Promise covers every installation we do in Fulshear. If something isn’t right within a year, we make it right. No argument, no fine print. Cody Beckman, who leads our team, set that standard because a gate installation should be a one-time decision, not a recurring headache. Our team has also handled post-Harvey operator replacements on Brazos-adjacent streets, so we know what Fulshear’s clay soil and humidity do to gate hardware. We stock corrosion-resistant fasteners and galvanised hinges for this exact market because we’ve seen what painted steel looks like after five wet seasons here.
Automatic Gate Installation in Fulshear
Automatic Gate Installation in Fulshear means pairing a new driveway or pedestrian gate with a motor, control board, and safety system built for the Texas Gulf Coast. We install swing and sliding operators from Viking, Ghost Controls, DoorKing, and Elite, sized to the gate’s weight and the number of cycles your family runs each day. A typical automatic gate installation in Fulshear runs $4,200 to $8,500 for a full setup, including the gate, operator, safety photocells, and keypad or remote entry.
Driveway Swing Gates
Most Fulshear homes use ornamental iron or aluminum swing gates across the driveway. These work with an articulated-arm or underground operator, and we set the post footings deep enough to hold against the clay soil’s wet-dry cycle.
Sliding and Security Gates
For wider driveways or tighter setback lines, a sliding gate on a steel track saves space and pairs well with higher-security access needs. We run the power conduit below grade in a way that drains rather than holds standing water, which matters on lots near the Brazos floodplain.
Gate Installation Services in Fulshear
Gate Installation Services in Fulshear cover the full build: post setting, gate hang, operator mounting, wiring, and access controls. Homeowners in master-planned communities like Cross Creek Ranch and Fulshear Lakes typically need us when their builder-grade gate has sagged beyond adjustment, or when they want to move from a manual gate to an automated one with keypad and remote entry. A manual ornamental gate installation runs $2,400 to $5,200. Pedestrian gates run $1,200 to $3,400 including the frame and hardware.
Post Setting and Alignment
Black-clay soil in Fort Bend County moves. Posts set shallow will lean within a few years. We dig and pour deeper concrete piers, and on gates over 14 feet wide we’ll often use a steel core post for extra rigidity.
Operator and Access Control
We mount the operator to the gate or post, run the power, and set up remotes, keypads, and optional smartphone controls. Every install includes a functioning safety photocell and entrapment protection, tested before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fulshear
We’re factory-trained on Viking, Ghost Controls, and DoorKing operators, and we keep their common control boards and brushed motor components in stock for Fulshear jobs. That matters because the post-Harvey wave of replacements from 2017 and 2018 are now hitting seven to eight years old. When a Ghost Controls board fails on a Brazos-adjacent street, we usually have the part on the truck instead of ordering it and making you wait. We also work with Elite operators and the other brands Fulshear families already own.
Common Gate Installation Problems We See in Fulshear Homes
- Posts knocked out of plumb by clay soil. The soil swells when wet and shrinks when dry, and over a few seasons a hinge post can shift enough to make the gate drag or the latch miss the strike.
- Corrosion from humidity and salt air. Painted steel hinges and fasteners rust quickly in Fulshear. We specify galvanised hinges and stainless fixings on every outdoor install because inland hardware just doesn’t last here.
- Post-Harvey operators aging out. Gate motors replaced after the 2017 flood are now at the point where brushed DC motors and control boards commonly fail. Streets near the Brazos are seeing this replacement cycle first.
- Safety sensors going bad in damp conditions. Photocells and loop detectors exposed to standing water or high humidity fail intermittently. We install gasketed, sealed units wherever water can pool.
Pricing for Gate Installation in Fulshear, TX
Here’s what gate installation costs in Fulshear right now. A manual ornamental driveway gate with two posts and hardware runs $2,400 to $5,200. A full automatic swing gate with operator, safety edge, photocells, and a keypad runs $4,200 to $8,500. Sliding gates add $800 to $1,800 for the track and steel fabrication. Pedestrian gates run $1,200 to $3,400. The variables are gate width, the operator you choose, the condition of your existing posts, and how far we need to run power from the house. You’ll see the exact number in writing before any work begins, and the price we quote is the price you pay. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Fulshear
Beyond Fulshear, our Gate Installation crews work in Richmond, Katy, Rosenberg, and Sugar Land. If you’re in one of those communities and need a gate built or replaced, we bring the same written price, cleanup photo, and 365-Day guarantee. You can read more about what we do across the area on our Gate Installation in Fulshear page, where you’ll find specific pricing and service details for this part of Fort Bend County.
Serving Fulshear, TX - Our Local Coverage Area
We’re based in the Fulshear area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Fulshear
Because Fulshear’s master-planned communities were built out in a compressed window between 2013 and 2023, thousands of gate operators were installed at roughly the same time. A large share are now aging out of warranty simultaneously. Add the post-Harvey replacement cycle from 2017-2018, and you get a surge of brushed DC motor and control board failures concentrated on streets near the Brazos. The clay soil shifting posts doesn’t help either, since a misaligned rack or sagging gate makes the operator work harder. Call (626) 649-4572 if your operator is acting up, and we’ll give you a straight answer on repair versus replacement.
Stainless steel fasteners, galvanised hinges, and aluminum gate frames last the longest in Fulshear. Painted steel corrodes fast here, especially near the Brazos where humidity and salt air sit on the metal. For posts, deeper concrete piers and steel core reinforcement keep the gate in alignment when the clay soil swells and shrinks. We spec all of this on our Fulshear installs by default.
We start by checking the hinge post for plumb. In Fulshear, clay-soil movement is usually the root cause, not the hinges themselves. We’ll reset the post on a deeper pier, replace worn hinges with galvanised units, and realign the gate so the operator isn’t dragging against the ground or pulling at an angle. If the rack-and-pinion has worn from the misalignment, we’ll replace that too. Estimates are free, and you’ll have a written price before we start.
At eight years old, a brushed DC motor or control board failure usually means replacement is the smarter call. You might get another two years out of a repair, but the parts cost on older boards often approaches half the cost of a new operator. We’ll tell you exactly what’s failing, what a repair costs, and what a replacement costs, then let you decide. Call (626) 649-4572 and we’ll come out, diagnose it, and give you both numbers in writing.
Yes. Any automatic gate operator installed in Fulshear needs at least one primary entrapment protection device, usually a safety photocell, and a secondary device like a reversing edge or loop detector. We install and test both on every job. If you have kids or pets in the yard, this is the difference between a gate that stops when something crosses the path and one that doesn’t. Every installation we do includes tested, functioning entrapment protection before we hand you the remote.
Call Latch & Post Gate Repair for Gate Installation in Fulshear
If your driveway gate is sagging, your operator is eight years old and struggling, or you’re ready for a new automatic gate in Fulshear, call (626) 649-4572. We’ll give you a free estimate, a written price before any work starts, and a gate that’s built for Fort Bend County’s soil and humidity. The 365-Day Done Right Promise backs the whole job.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Fulshear with the Cedarwell family since 2009.