Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Malibu
Gate installation in Malibu costs between $2,800 and $12,500 for most residential projects, with electric driveway gates starting around $5,400 and bespoke estate gates running $10,000 to $25,000 or more depending on size, material, and access-control integration. We quote every job in writing before any work begins, so you know the exact number the day we walk your property. Latch & Post Gate Repair has been part of the Cedarwell family since 2009, and our crews know Malibu’s specific demands: salt air, canyon winds, Coastal Commission permits, and gates heavy enough to need real structural work. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Malibu’s Preferred Gate Installation Company
Malibu homeowners call us because we treat a gate installation as structural work, not a bolt-on. Every job gets a written price before we start, shoe covers and drop cloths when we step inside, and a photo of the cleanup before we leave. Those aren’t add-ons. They’re the Cedarwell Care Promise, and Cody Beckman holds every technician to it.
What builds trust here is specificity. We know that a gate on Carbon Beach lives in a different environment than one on Latigo Canyon. We know which control boards survive salt air and which don’t. We know Malibu’s Coastal Commission process well enough to set realistic expectations before you commit. Our Gate Installation team carries marine-grade stainless and powder-coated aluminum hardware on the truck because standard zinc-plated hardware fails within two years this close to the Pacific. That’s local knowledge you can’t fake from a call center.
Electric Gate Installation in Malibu
Electric gate installation in Malibu means pairing a heavy, often custom-fabricated gate with an operator that will run quietly for years despite salt air, Santa Ana winds, and daily use by family, staff, and delivery vehicles. Whether you’re automating a new pedestrian gate off PCH or building a full driveway entry system in a canyon estate, the job includes the operator, safety edges, receiver, and the wiring or solar power to run it. A standard single-swing electric gate installation in Malibu typically runs $4,200 to $8,800; a double-swing or sliding electric driveway gate starts around $6,500 and goes up with custom fabrication, stone-clad columns, and intercom or CCTV integration.
Marine-Grade Hardware Choices
Within a half-mile of the shoreline, we specify 316 stainless hinges, powder-coated aluminum frames, and sealed control boards. That combination adds roughly 15 to 20 percent to material cost over inland hardware, but it’s the difference between a gate that lasts fifteen years and one that seizes in three.
Solar and Low-Voltage Power Runs
Many Malibu properties, especially those along the canyon roads, have long driveway runs where trenching for power is disruptive and expensive. Solar operators from Ghost Controls and Viking handle those sites cleanly. We’ll walk you through the trade-off: solar saves the trench but gives you fewer cycles per day, which matters on a gate that opens twenty times daily.
Driveway Gate Installation in Malibu
Driveway gate installation in Malibu is rarely a stock-unit job. Most homes here, whether beachfront compounds along PCH or custom canyon retreats off Decker Canyon and Kanan Dume, demand a gate sized to the property and weighted to hold up under wind loads that would fold a box-store panel. A standard steel driveway gate with a Linear or DoorKing operator runs $6,000 to $11,000 installed here. Custom ornamental steel or aluminum work, stone-clad piers, and integrated access control regularly push that to $15,000 to $30,000.
Sliding Gates for Steep and Narrow Driveways
On canyon lots where the driveway climbs steeply or bends around a corner, a sliding gate usually beats a swing gate. It needs no arc clearance, handles lateral wind better, and can be built heavier without stressing the hinge posts. We fabricate to the property’s grade, not the other way around.
Security and Privacy Integration
Most Malibu driveway gates we install tie into a keypad, intercom, or full camera-entry system. We coordinate the gate operator with your existing access control so one system, not three, governs who enters. That’s quieter to live with and easier to service later.
Trusted Brands We Service in Malibu
Our technicians are factory-trained on the operators Malibu homeowners actually run: Linear, Viking, Ghost Controls, DoorKing, and more. We stock common replacement boards, safety edges, and remotes for these brands locally, which means a failed operator on a Tuesday doesn’t mean waiting a week for a part from out of state. Brand familiarity matters when the gate is custom and the operator is the only moving part you’ll interact with daily.
Common Gate Installation Problems We See in Malibu Homes
- Salt-corroded hinge pins and motor housings. Within a half-mile of the Pacific, standard zinc or powder-coated steel begins to pit within two years. We replace with 316 stainless and sealed marine housings on nearly every oceanfront job we touch.
- Operator failures on post-Woolsey rebuilds. Homes rebuilt after 2019 often got residential-grade operators installed under construction deadlines. Salt air penetrates inland through canyon drainages, and those units are failing at three to five years, half their rated life.
- Wind-bent frames and stripped gear teeth. Santa Ana winds funneling through the Santa Monica Mountain canyons push lightweight gates sideways until frames bow and opener gears slip. Gates here need lateral-load ratings that most catalog units don’t carry.
- Coastal Commission permit delays. If your property falls under the California Coastal Commission’s jurisdiction, replacement can’t start until a Coastal Development Permit is secured. That can add six to twelve weeks, so planning ahead matters.
Pricing for Gate Installation in Malibu, CA
A single swing driveway gate with a standard operator runs $6,000 to $9,500 in Malibu. A custom double-swing or sliding gate with marine-grade hardware, stone columns, and keypad entry typically lands between $10,000 and $18,000. Bespoke ornamental work on estate properties can exceed $25,000 when fabrication, automation, and surveillance integration are all in scope. What moves the number: gate width and weight, whether you need 316 stainless or coated aluminum, solar versus trench power, and access-control integration. We provide a written quote before any work begins, and that’s the number you pay. Call (626) 649-4572 for a free estimate at your property.
One thing specific to Malibu: salt air is not a maybe. It’s the primary driver of every material choice we make here. Gates that would last twenty years in Calabasas need marine-grade components to reach ten on Carbon Beach. We quote accordingly, and we’ll show you the exact line items so you see where the money goes.
We Also Serve Cities Near Malibu
Our crews serve Malibu and the surrounding communities, including Agoura Hills, Westlake Village, Thousand Oaks, and Calabasas. If your property sits just over the county line or up in the canyon corridors, we can reach you as easily as we reach Point Dume.
Serving Malibu, CA - Our Local Coverage Area
We’re based in the Malibu area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Malibu
Because Malibu’s topography holds the salt air longer. The ocean-facing slopes, canyon mouths, and beachfront flats west of Topanga get direct, uninterrupted marine exposure, while Santa Monica and Pacific Palisades sit partly behind the Palisades bluffs. Within a half-mile of the shoreline, standard steel hardware fails noticeably in two to three years. We specify 316 stainless and powder-coated aluminum for those zones. Call (626) 649-4572 and we’ll tell you exactly what your gate needs.
A swing gate pivots on hinge posts and needs flat ground or a graded arc to open; a slide gate rolls on a track and works better on steep or curving driveways. Canyon lots off Latigo Canyon or Kanan Dume often favor slides because the grade makes a swinging panel impractical. We’ll measure your specific driveway before recommending either.
It can add six to twelve weeks if your property falls under Coastal Commission jurisdiction and the gate qualifies as new development. We don’t handle the permit filing ourselves, but we work with your contractor or permit expediter and build the schedule around the approval timeline, not ahead of it. Planning the install early avoids a failing gate situation with no legal path to replace it.
Not always, but many do. Long driveway runs on canyon properties make trenching expensive, and solar operators from Viking or Ghost Controls eliminate the trench entirely. The trade-off is fewer open cycles per day. We’ll calculate your expected daily cycles and recommend solar or line power based on the actual number, not a guess.
Keypads, telephone-entry intercoms, and full CCTV entry systems are standard on the Malibu properties we serve. Most jobs tie the gate operator into an existing system rather than bolting on a standalone keypad. We coordinate with your security integrator where one exists, and we’ll match the operator’s control board to the system’s protocol so everything speaks the same language from day one. For a precise quote on your property, call (626) 649-4572.
On a Carbon Beach compound off PCH, we replaced a seized LiftMaster swing gate operator and rebuilt the hinge post with 316 stainless hardware after salt air had frozen the original pins and let the panel sag into the driveway. Tying the new operator into the property’s keypad entry and CCTV intercom gave the owners silent, reliable entry again, this time with marine-grade components rated for the coastal exposure. That’s the standard we build to in Malibu.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. If you’re in Malibu and need a gate installed, replaced, or automated, call (626) 649-4572 and a live person will answer, however late it is. We’ll schedule a time that works for you, walk the property, and hand you a written price before we touch anything.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Malibu with the Cedarwell Care Promise.