Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lantana
Gate installation in Lantana means building for salt air, high water tables, and hurricane season – not just hanging a panel between two posts. We’ve been installing driveway gates, pedestrian gates, sliding gates, swing gates, and security gates in Lantana since our founding in 2009, and the failures we see here are predictable: seized hinges, corroded operator boards, and posts that heave with the water table. A new gate in Lantana typically runs $2,400 to $9,500 depending on size, material, and whether automation is included. Call (626) 649-4572 and we’ll give you a written price before any work begins.
Why Latch & Post Gate Repair Is Lantana’s Preferred Gate Installation Company
Our Gate Installation team works exclusively on gates. That’s not a marketing line – it’s the entire job. We don’t paint fences, fix sprinklers, or patch drywall. Every technician who shows up at your door in Lantana is background-checked, uniformed, and factory-trained on the operators Lantana homeowners actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
We follow the Cedarwell C.A.R.E. standard on every visit. That means we clean up like it’s our own home, ask before we move or touch anything, respect your family’s time and quiet hours, and explain the price before the work. Shoe covers and drop cloths go down before we step inside. A photo of the clean-up is taken before we leave. Those aren’t add-ons – they’re the routine, and they’re included on every job, no matter how small.
Cody Beckman leads our team, and he’s built the Lantana service around a simple rule: name what will be protected in your home before the work starts. That means your floors stay clean, your pets stay safe, and your sleeping kids don’t get woken up by loud tools. A live person answers our phone 24 hours a day, seven days a week – no voicemail, no callback queue.
Gate Fabrication in Lantana
Gate Fabrication in Lantana almost always starts with one question: will this gate survive the Intracoastal? Because the Lake Worth Lagoon forms Lantana’s entire eastern boundary and saltwater canals thread through residential neighborhoods, gate hardware here is bathed in corrosive salt air from multiple directions year-round – not just a prevailing ocean breeze. Mild-steel frames, standard hinges, and operator control boards oxidize and seize years faster than on the same gate five miles west in inland Palm Beach County. So when we fabricate for Lantana, we specify differently from day one.
Marine-Grade Material Choices
For framed driveway gates within sight of the water, we recommend galvanized steel with a marine-grade powder coat, or aluminum frames where weight matters. Stainless fixings throughout – hinges, bolts, brackets – because a painted mild-steel hinge on a canal-front lot in Lantana can seize solid inside two years. A custom-fabricated single driveway gate in Lantana typically runs $2,800 to $6,500, and a double swing gate setup starts around $5,000 and goes up from there, depending on width and whether you’re adding automation.
Post Footing and Anchor Work
Lantana’s canal-front lots sit at or near sea level with high water tables, and concrete gate posts shift and heave seasonally. A gate fabricated perfectly will still bind if the post it hangs from has moved. We pour footings deeper than standard, use stainless anchor bolts, and set posts so they’re plumb and true before the gate panels ever go on. That’s the difference between a gate that runs right for a decade and one that needs realignment every spring.
Automatic Gate Installation in Lantana
Automatic Gate Installation in Lantana requires more than bolting on an operator. Salt-laden air kills control boards, racks, and pinions years ahead of inland duty, so we choose components rated for what Lantana actually throws at them. A full automatic gate installation – gate panel, operator, safety edges, and control board – typically runs $3,800 to $9,500 in Lantana, with the range driven by gate size, whether the operator is solar or line-voltage, and how much fabrication is involved.
Operator Selection for Coastal Air
We factory-train on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock the parts Lantana customers need most. For canal-front properties, we lean toward operators with sealed control boards and corrosion-resistant housings. A quality line-voltage operator for a single swing gate typically runs $1,200 to $2,800 installed, installed price included in the full gate figure above. Solar operators cost about $400 to $900 more but avoid the need for a power run across the driveway.
Entrapment Protection and Compliance
Florida code requires entrapment protection on automated gates: photo eyes, safety edges, and, where applicable, pressure-reversing functions. We install these as standard on every automatic gate in Lantana – not as an upsell. It’s a legal requirement and it’s the right thing to do when kids and pets live on the property. Written confirmation of compliance comes with the job.
Trusted Brands We Service in Lantana
We carry parts and service equipment from Linear, Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, and the rest of our factory-trained lineup. That matters in Lantana because salt-air corrosion means you don’t want to wait a week for a part to ship from somewhere else while your gate sits open. We stock the boards, hinges, racks, and safety edges that Lantana homes actually need, so the right fix happens on the first visit – and if something isn’t done right, our 365-Day Done Right Promise means we make it right, no argument, no fine print.
Common Gate Installation Problems We See in Lantana Homes
- Steel hinges seized solid from salt air. Corrosion welds the pin to the strap, so the gate stops swinging long before the panel itself fails. On canal-front Lantana lots, this can happen in two years or less with painted mild-steel hardware.
- Operator housings and control boards corroded from omnidirectional salt. LiftMaster, FAAC, and Linear boards that would last eight years inland often fail in three or four here, especially where the board sits inside a housing that gets salt-laden air pulled through it by the operator’s own fan.
- Concrete gate posts heaving and shifting on the high water table. Lantana’s sea-level lots move, and the posts move with them. That throws sliding-gate track alignment out of tolerance and causes the rack to bind against the pinion – the single most common repeat-service call we see in Lantana that isn’t storm-related.
- Hurricane-season hinge and track failures. Sustained gusts above 60 mph regularly knock gates off hinges that corrosion has already weakened. From June through October, we get a concentrated surge of calls from Lantana homeowners whose gates were fine – until they weren’t.
Pricing for Gate Installation in Lantana, FL
Here are real numbers for the Lantana market. A basic pedestrian gate runs $900 to $2,200. A single driveway swing gate in aluminum or galvanized steel runs $2,400 to $5,500. A double driveway gate runs $5,000 to $9,500. Adding a line-voltage automatic operator adds roughly $1,200 to $2,800, and a solar setup adds $1,500 to $3,000. Custom fabrication, longer posts for canal-front footings, and marine-grade stainless hardware all push the price toward the higher end of those ranges. You’ll see the exact number in writing before we touch anything, and the price is quoted and agreed before any work starts. Estimates are free – call (626) 649-4572 and we’ll schedule a measure.
We Also Serve Cities Near Lantana
While this page is written for Gate Installation in Lantana, our technicians also serve the surrounding South Florida communities. We take installation calls from Jacksonville, Miami, Tampa, and Orlando, with scheduling coordinated from our Miami (South FL) office. If you’re just outside the Lantana service area, call and we’ll confirm coverage and timing for your street.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Lantana
Lantana sits directly on the Lake Worth Lagoon, so salt air reaches your gate from the east, south, and – via the canals – from directions you’d never expect inland. The salt settles on hinges, bolt heads, operator housings, and control boards, and it works into the metal year-round. Steel hinges seize, boards corrode, and posts rust at the base. The same gate five miles west in inland Palm Beach County would last years longer. For Lantana, we specify galvanized or aluminum frames, marine-grade stainless fasteners, and sealed operator housings. Call (626) 649-4572 for an exact quote – estimates are free.
The track may look straight, but on Lantana’s sea-level lots the concrete post that carries the track has usually moved. High water tables make posts heave seasonally, and the rack then sits a few millimeters out of alignment with the pinion. Under load, the gate walks off the track. A canal-front homeowner off Hypoluxo Road had a LiftMaster slide gate that jumped its track twice in one season; what we found was a heaving sea-level post footing and a rack and pinion rusted tight from omnidirectional salt air off the Intracoastal. We reset the footing, swapped the mild-steel rack for a stainless-fastened assembly and upgraded the hinges to marine-grade stainless, then realigned the track. The gate has run true through two hurricane seasons since. If yours keeps jumping, call (626) 649-4572 and we’ll diagnose the post, not just the track.
Yes. Florida requires entrapment protection on automated gates, including photo eyes, safety edges, and, where relevant, pressure-reversing functions. We install these on every automatic gate in Lantana as standard, not as an option. It protects kids, pets, and anyone walking near the gate. If you’re not sure whether your existing gate is compliant, we’ll check it and give you a written price for any upgrades before work starts. Call (626) 649-4572 to schedule a check.
Usually both. Wind is the force, but corrosion is what made the gate weak enough to fail. Lantana’s salt air eats hinge barrels, pin bolts, and the post anchors long before a storm arrives. When sustained gusts hit above 60 mph, a hinge that’s lost 30 percent of its steel gives way. We see this every season: gates that looked fine in May, but underneath, the hardware was already on borrowed time. After a storm, we inspect the frame, the hinges, the rack, and the operator board – and we replace with marine-grade stainless where the failure started. Call (626) 649-4572 and we’ll get your gate upright and rebuilt properly.
Solar openers can work in Lantana, but the salt air is the harder test than the sun. The battery and control board sit inside a housing that takes salt-laden air every day, and a poorly sealed housing will fail early. We install solar operators with sealed enclosures and corrosion-resistant hardware, and we size the panel for Lantana’s sun exposure, which is good but occasionally shaded by palms and canal-side vegetation. A solar setup typically adds $1,500 to $3,000 to the full installation. Call (626) 649-4572 for a written price on your specific opening.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Lantana since 2009.