Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kirby
Gate installation in Kirby costs between $1,800 and $7,500 for a standard residential swing or sliding gate, and $3,200 to $12,000 for an automated electric gate with operator and safety equipment. That’s the honest range we quote for this small city, where 1950s ranch homes and IH-10 East commercial yards sit within minutes of each other and need very different work. If you’re in Kirby and need a gate hung right, set in black clay that actually holds a post, and finished with a written price before we start, call (626) 649-4572. We service every street inside the Kirby city limits, from Ackerman Road down to the warehouse frontage along IH-10 East.
We’re Latch & Post Gate Repair - Kirby, part of the Cedarwell family. We’ve been hanging and fixing gates since 2009, and we approach Kirby jobs with one rule: the gate has to open and close like it was always there, and the yard has to look like we were never there. The written price, shoe covers, drop cloths, and cleanup photo are not extras. They’re how every visit works, on every single gate.
Why Latch & Post Gate Repair Is Kirby’s Preferred Gate Installation Company
Kirby homeowners call us because we talk in specifics. We know that a ranch house off Ackerman Road built in 1962 usually has an original wrought iron gate with a seized hinge post and a latch that has not lined up in a decade. We know the commercial slide gates along the IH-10 East frontage cycle forty times a day and lose limit-switch calibration to 18-wheeler vibration. That local pattern recognition means we diagnose faster and do not sell a full replacement when a post re-set and a new hinge set is the honest fix.
Our technicians are background-checked, uniformed, and trained on the brands Kirby properties actually use: Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, and BFT. Every job is quoted in writing before work starts. Every visit includes shoe covers and drop cloths inside the home, and a photo of the clean-up before we leave. Cody Beckman leads our team, and the 365-Day Done Right Promise backs every installation. If it isn’t right, Latch & Post makes it right. No argument, no fine print.
Our full Gate Installation team coordinates scheduling from our San Antonio office, and crews serve Kirby directly. A live person answers when you call, 24 hours a day, seven days a week. No voicemail. No callback queue.
Electric Gate Installation in Kirby
Electric Gate Installation in Kirby typically runs $3,200 to $12,000, with most residential operator retrofits on the lower end and full automated slide gates on commercial IH-10 East properties at the top. The job here almost always means either retrofitting an operator onto an existing 1960s swing gate or replacing a heavily used commercial slide gate operator that predates modern safety standards. Bexar County’s expansive black clay works against every post set, so we start with the footing and work up from there.
Operator Retrofit on Existing Gates
When a Kirby homeowner has a wrought iron gate that still swings square but has no automation, we can often mount a Linear or Ghost Controls operator directly to it. We install a safety photocell and edge sensor, run the power, and program the remote. The gate itself does not need to be replaced just to get automation.
Full Automation With Entrapment Protection
New automated gates in Kirby need two independent entrapment protection devices: a photocell across the gate path and a reversing edge or current-sensing operator. This is not optional equipment. It is the code requirement that keeps kids and pets safe, and we wire it on every electric gate we install, residential and commercial alike.
Driveway Gate Installation in Kirby
Driveway Gate Installation in Kirby runs $1,800 to $6,800 for a single swing or sliding panel, depending on width, material, and whether automation is included. Most Kirby driveways are 10 to 14 feet wide, which suits a single swing gate or a compact chain-driven slide gate. We measure, order, set new posts in concrete poured below the frost line, hang the panel, and adjust the latch until it closes with one finger.
Single Swing Gates for Ranch Homes
The classic Kirby driveway is a short, flat entrance to a 1950s or 1960s ranch. A single swing gate in steel or aluminum fits well here, and we match the frame to the existing fence style so the new gate does not look like an afterthought. We set the hinge post in a deeper concrete pour than the original, which is what prevents the black clay from heaving it out of plumb in two years.
Sliding Gates for Wider Entrances
For double-wide driveways or any entrance where a swing gate would block the sidewalk, a sliding gate on a track and roller set is the better call. Kirby’s flat terrain helps here, but the IH-10 East road vibration means we use lock washers and thread-locking compound on every set screw, because a slide gate that drifts off its limit is a gate that will not close.
Trusted Brands We Service in Kirby
We service and install operators from Linear, Viking, Ghost Controls, and DoorKing, alongside LiftMaster, FAAC, BFT, and Elite. For Kirby customers, that means we can usually bring the right control board, remote, or safety sensor on the first visit rather than ordering it in and making you wait. Our techs are factory-trained on the exact boards these brands ship, which matters when you are trying to retrofit a DoorKing slide operator from 2008 onto a gate that has been through a freeze event and a decade of clay heave. The right part, installed with the right settings, is the difference between a gate that works for fifteen years and one that calls us back in six months.
Common Gate Installation Problems We See in Kirby Homes
- Post heave from Bexar County black clay. The soil expands when wet and contracts when dry, tilting gate posts out of plumb. A gate that dragged in August may bind completely by March, and the fix is a deeper concrete footing, not just a hinge adjustment.
- Obsolete control boards on commercial slide gates. IH-10 East yards and warehouses run gates built before modern safety standards, and their boards fail from heavy daily cycles. We carry replacement boards for DoorKing, FAAC, and Viking operators so the gate is not down for a week.
- Deferred maintenance on military-connected rentals near JBSA-Randolph. Tenant turnover means no one lubricates hinges or corrects sag for years. By the time the gate stops closing, the post footing has shifted and the hinge pins are worn oval, which turns a $200 adjustment into a full re-set.
- Freeze-cracked operator gear housings. Hard freeze events like Winter Storm Uri crack plastic gear housings in operators not rated for sub-freezing temps. The failure often shows up weeks later, when the homeowner tries to open the gate and hears only a grinding motor.
Pricing for Gate Installation in Kirby, TX
A standard single swing gate with manual latch in Kirby runs $1,800 to $2,900. Add an electric operator with safety photocell and keypad entry, and the range moves to $3,200 to $5,500 for residential work. A commercial slide gate on the IH-10 East corridor with a full operator replacement typically lands between $5,000 and $12,000, because the gate panels are longer, the operators cycle more heavily, and the safety requirements are stricter. What changes the price most is the condition of the existing post footing. If the black clay has heaved the post, we re-set it in a deeper pour before hanging anything, and that adds $300 to $600 per post. You will see the exact number in writing before we touch a single screw. Call (626) 649-4572 for a free estimate.
If you are in Kirby and have been nursing an old gate along, the measurement and the written quote are free.
We Also Serve Cities Near Kirby
While this page is for Kirby homeowners and commercial properties, our crews also handle gate installation in Houston, San Antonio, Dallas, and Fort Worth. Each of those cities has its own soil, climate, and gate failure patterns, and we quote them with the same written-price rule. If you are in one of those areas or in Gate Installation in Kirby, call us and a live person will get you scheduled.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Kirby
We can often retrofit an operator onto a 1960s wrought iron gate if the hinge post is still plumb and the panel has not sagged more than an inch, which runs $3,200 to $4,800. If the black clay has heaved the post out of plumb, the footing has to be re-set first, and at that point a new gate and post package is sometimes the cheaper long-term call. We will show you both numbers in writing before you decide. Call (626) 649-4572 to schedule a measurement.
Every new electric gate gets a photocell across the gate path and either a reversing edge or a current-sensing operator, which are the two independent entrapment protection devices required by code. On a Kirby ranch home with kids and pets, this is what stops the gate from closing on a small hand or a dog that runs through at the wrong moment. We wire and test both devices on every install, not just some of them.
On the IH-10 East corridor, this is usually vibration from 18-wheeler traffic backing out the limit-switch set screws or the rack and pinion alignment, and the fix is mechanical before it is electrical. We tighten and lock down the set screws, re-seat the rack, and recalibrate the limits; if the board itself is obsolete and will not hold settings, that is when we replace the operator. A quick call to (626) 649-4572 gets you an honest diagnosis.
Replacement is cheaper when the control board is obsolete and no direct replacement exists, the gear housing is cracked from a freeze event, or the motor pulls more current than the board is rated for, which typically means $900 to $1,800 for a new residential operator versus repeated service calls on a unit that fails every quarter. On commercial slide gates that cycle forty times a day, retrofitting an old operator usually means buying time, not fixing the problem. We will quote both paths and tell you which one we would spend our own money on.
Yes, we install solar gate openers from Ghost Controls and other brands for Kirby properties where trenching power is impractical or the gate sits far from the house panel. Solar kits add $1,200 to $2,500 to a residential install, and we size the panel and battery for the actual number of daily cycles, not the theoretical minimum. Kirby’s sunny climate helps, but the battery bank has to be sized right or the gate will not cycle on a cloudy December week.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Kirby since 2009.