Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kirby, TX
We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist working across Kirby, TX. Most Kirby calls fall into two buckets: aging residential gates on 1950s-to-1970s ranch homes that have never been rebuilt, and heavy commercial sliding gates along the IH-10 East corridor that cycle dozens of times a day. The black clay soil, the summer humidity, and the constant low vibration from highway truck traffic all show up in the work we do. Call (626) 649-4572 and a live person answers, any hour.
Why Kirby Homes Are Different
Kirby is a fully enclosed enclave city wrapped by San Antonio along IH-10 East, and that geography shows up in every gate we touch. The residential streets are lined with post-WWII ranch homes, most still carrying their original wrought iron or chain-link gates. Hinges corrode, frames sag, and posts heaved out of plumb by Bexar County’s expansive black clay are the norm, not the exception. Wet-dry cycles make that clay swell and shrink every year, so a gate that latched cleanly in March can drag the ground by August.
Then there’s the commercial side. Kirby sits hard against the IH-10 East industrial corridor, and the metal sliding gates on fabrication yards, auto lots, and warehouses see daily heavy-use cycles that residential gates never face. Eighteen-wheeler traffic sends constant vibration through the ground, backing out set screws, loosening limit switches, and slowly separating posts from their concrete footings. Commercial clients on that corridor know the pattern immediately. Homeowners on the quieter side streets often don’t connect a sagging gate to the highway until we point it out. Add in a large share of military-connected rental homes near JBSA-Randolph, where gates can go years between tenant turnovers without adjustment or lubrication, and you get a repair mix that’s genuinely different from a typical bedroom suburb.
Our Main Kirby Services
Most Kirby homeowners call us about one of three things: a gate that no longer latches or swings right, a full replacement, or an electric operator that has stopped responding. Each has its own page with local detail.
Gate Repair in Kirby
Repair work in Kirby usually means correcting years of clay-soil movement: re-hanging a sagging frame, replacing corroded hinges, resetting a post that’s tilted out of plumb, or fixing a latch that catches only when the gate is forced. On older wrought iron gates, we see a lot of seized hinge pins and weld fatigue at the corners. We quote the exact price in writing before any work starts, lay drop cloths, and put on shoe covers before stepping inside a garage or side yard gate. Gate Repair in Kirby covers what a typical fix involves and what to expect.
Gate Installation in Kirby
New gate work in Kirby has to account for the clay. A post set without enough concrete depth or drainage will lean within a few wet-dry cycles, so we plan footings around the soil, not just the panel. Most Kirby installations are replacements: swapping a failed chain-link or corroded wrought iron gate for a properly hung panel on new posts, sized to the existing opening. You get a written price before we order anything, and the work is scheduled around your time. Gate Installation in Kirby walks through the process and typical costs.
Electric Gate Repair in Kirby
Kirby’s electric gate problems split two ways. Residential operators, often on the perimeter of ranch properties, fail from age, humidity, or a hard freeze like Winter Storm Uri cracking a plastic gear housing that wasn’t rated for sub-freezing temperatures. Commercial slide operators along IH-10 East fail from relentless duty cycles and road vibration. We’re factory-trained on the brands most Kirby properties actually use. Electric Gate Repair in Kirby covers diagnostics, common failures, and turnaround.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kirby
We carry parts and factory training for the operators Kirby homes and businesses run every day: Linear, Viking, Ghost Controls, and DoorKing, among others. Having boards, remotes, and safety edges on the truck means most electric gate fixes in Kirby happen on the first visit. See our brands for the full list.
Pricing for Gate Company in Kirby, TX
| Service | Typical range in Kirby |
|---|---|
| Gate hinge replacement | $145 - $285 |
| Gate latch replacement | $95 - $220 |
| Post reset (soil heave correction) | $285 - $575 |
| Wrought iron weld repair | $120 - $310 |
| Wood gate frame rebuild | $220 - $480 |
| Full gate replacement (standard single) | $850 - $2,200 |
| Electric operator board replacement | $200 - $450 |
| Operator limit switch adjustment | $95 - $185 |
| Safety edge/sensor replacement | $150 - $330 |
Clay-soil post work and heavy commercial slide repairs push prices toward the top of these ranges in Kirby; standard latch and hinge fixes land near the bottom. Whatever the number, you’ll see it in writing before we touch anything, and nothing gets ordered or started without your sign-off.
Neighborhoods We Serve in Kirby
We work throughout Kirby, from the older ranch streets south of Binz-Engleman Road to the industrial frontage properties along IH-10 East and the rental corridors nearer JBSA-Randolph. Most Kirby jobs are reached within the hour when we’re dispatching crews from the metro office.
- Old Kirby residential area
- Binz-Engleman Road corridor
- Paul Drive area
- Milam Road / IH-10 East commercial zone
- East Highland / Gibbs-Sprawl area
Service Area – Cities Near Kirby
Kirby is our home market, but the Cedarwell gate specialists work across the wider metro. If your property sits outside Kirby proper, our crews cover Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX under the same written-price, shoe-covers, cleanup-photo routine.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kirby
No separate service call fee on completed work. The written estimate includes the visit, so you’ll see the full number before we begin. If you decide not to proceed, you’re not chased with a bill for the look.
Repairs to an existing gate almost never need a permit in Kirby. Full replacements may, depending on post location and height. We check local requirements before we start and tell you if anything needs filing.
Yes. We schedule around quiet hours when kids are sleeping, and we use low-noise tools where the job allows. Tell us when you call the number below and the technician will know before arriving.
For a straight answer in writing, call (626) 649-4572. We’ll quote the work before we start, protect your floors, and leave with a cleanup photo. Home
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kirby Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide