Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kennedale
Gate installation in Kennedale typically runs $2,400-$8,500 depending on the gate’s width, weight, and whether you need an automatic operator, solar power, or a keypad entry system. Most acreage driveway gates here sit on Blackland Prairie clay that swells and shrinks with the seasons, so the footing work matters as much as the gate itself. We serve the semi-rural tracts east of downtown, the custom homes along Dick Price Road, and the half-acre ranch properties throughout 76060. Call (626) 649-4572 for a written price before any work begins.
Why Latch & Post Gate Repair Is Kennedale’s Preferred Gate Installation Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, and our work in Kennedale is built around what this city actually has: heavy tubular-pipe gates on acreage lots, long gravel driveways where solar is the only practical power source, and clay soil that punishes shallow post footings. Unlike gate companies that mostly see suburban ornamental iron, our crews work the rural-residential mix that defines this corner of southern Tarrant County.
Every visitor to a Kennedale home arrives in a uniform, background-checked, and the technician follows the Cedarwell C.A.R.E. values on every visit: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. Shoe covers and drop cloths come out before we step inside your home or garage, and we send a photo of the clean-up before we leave. Cody Beckman leads our gate installation team, and the 365-Day Done Right Promise backs every single job: if it isn’t right, we make it right. No argument, no fine print.
We answer the phone with a live person 24 hours a day, seven days a week. No voicemail. No callback queue. When a spring storm bends a gate panel off its track out near the Johnson county line, you reach a person who can schedule a crew to Kennedale, not an answering service.
Sliding Gate Installation in Kennedale
Sliding Gate Installation in Kennedale is often the right answer for long rural driveways where a swing gate would need too much clearance or would fight the slope. A sliding gate rides on a steel track and rollers, so it doesn’t depend on hinge posts staying perfectly plumb the way a swing gate does. For acreage properties with wide equipment access or a curved entry off a county road, a sliding gate is frequently the more dependable choice. In Kennedale, a standard sliding driveway gate with manual operation typically runs $2,800-$5,200, while an automated sliding gate with an operator, safety photocells, and keypad entry usually lands between $4,500 and $8,500.
Track and Roller Work on Gravel Entries
Gravel is the default driveway surface on most Kennedale acreage, and it moves. Small stones migrate onto the gate track, clog the rollers, and eventually bind the gate mid-travel. We set sliding gate track on a concrete footing that sits above the gravel line, and we spec sealed-bearing rollers that shrug off dust and crushed limestone fines better than open bearings.
Cantilever Sliding Gates for Pasture Access
Where a bottom track would get buried by hay, mud, or tractor traffic, we install cantilever sliding gates that hang from posts and roll above the ground with no track to clog. They cost more, but on a working horse property or equipment entry, they’re the only sliding gate that won’t fight the terrain.
Gate Opener Installation in Kennedale
Gate Opener Installation in Kennedale starts with one hard question: how heavy is the gate, and what’s holding the post? We’ve replaced enough bent operator arms and cracked footings on this city’s rural tracts to know that a residential-grade opener bolted onto a 400-pound tubular-pipe cattle gate will fail inside two seasons. A properly sized gate opener installation in Kennedale typically runs $1,800-$3,600 for the operator, mounting, safety photocells, and wiring, with solar power adding $400-$900 where no line voltage exists at the driveway.
Sizing the Operator to the Gate, Not the Price Tag
The biggest mistake we see in Kennedale is an operator rated for a suburban ornamental gate asked to swing a heavy pipe gate across a long radius into the wind. We measure the gate’s actual weight and span, then match the operator’s duty cycle and torque rating to that load. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the right unit goes on the first time.
Solar Power for Driveways Without Line Voltage
East of downtown Kennedale, a lot of long driveways have no power at the gate. Running conduit hundreds of feet from the house or barn is expensive, and trenching through Blackland Prairie clay is slow work. A solar gate opener with a properly sized panel and battery bank is the practical answer, and it’s a setup we install regularly on farm and horse-property entrances throughout the 76060 zip.
Trusted Brands We Service in Kennedale
We’re factory-trained on the gate operators Kennedale homeowners and acreage owners actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a DoorKing operator on a custom home off Kennedale-New Hope Road loses its limit switch, or a Ghost Controls solar unit on a pipe gate near the Tarrant/Johnson county line stops holding a charge, we know the part and how to install it correctly. Kennedale’s mix of older manual gates retrofitted with automation and new custom installs means we stock parts for both ends of that spectrum.
Common Gate Installation Problems We See in Kennedale Homes
- Posts heaving out of plumb on clay soil. Blackland Prairie expansive clay swells with spring rain and shrinks in August heat, slowly rotating hinge posts until a swing gate catches its latch or drags the ground. A deeper concrete footing, properly sleeved, is the fix that survives the cycle.
- Residential operators strapped onto cattle gates. Acreage owners retrofit a manual tubular-pipe gate with an opener rated for half its weight. The arm bends, the gearbox strips, and the post cracks. We see it constantly on the rural tracts east of downtown.
- Wind and hail damage to panels and safety edges. Spring straight-line winds and large hail across southern Tarrant County bend gate panels, knock photocell housings out of alignment, and tear safety edges loose on long rural driveways.
- Undersized solar panels on shaded entries. A small panel that works on paper fails under a live oak canopy or a run of cloudy spring days. We size the panel and battery bank to the actual shade, not the brochure.
Pricing for Gate Installation in Kennedale, TX
You’ll see the exact number in writing before we touch anything. A manual single swing gate on a half-acre Kennedale lot typically runs $2,400-$4,000 installed. An automated sliding gate for a long driveway lands at $4,500-$8,500 with operator, rollers, safety photocells, and keypad entry. Solar power adds $400-$900 where line voltage isn’t at the gate. Heavy-duty automated swing gates for wide pipe or equipment entries run $5,500-$9,500 because the operator, footing, and hinge work all scale with the gate’s weight. The quote covers the gate, hardware, operator, and labor. We don’t add surprise line items after the fact. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Kennedale
Our Gate Installation team works throughout southern Tarrant County. If you’re in Arlington, Mansfield, Burleson, or Fort Worth and need a gate installed, sized, or automated, the same written-price, clean-up-photo routine applies. Learn more about our work in Gate Installation in Kennedale or call for a free estimate at your property.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Kennedale
Yes, but only with an operator actually rated for the gate’s weight and swing radius. First we measure the gate and the post footing. On many older pipe gates, the hinge post isn’t deep enough or the footing has cracked under years of use, so we may need to reset the post before mounting the operator. This is exactly the work we did on a horse-property entry off Dick Price Road, where a residential-grade opener had bent its arm against a heavy pipe gate. We set a deeper footing, corrected the sag, and installed a heavy-duty LiftMaster swing operator alongside a keypad and safety photocell. Call (626) 649-4572 and we’ll schedule a free measure.
The Blackland Prairie clay under your posts is expanding with spring rain, and it doesn’t expand evenly. One post lifts or rotates slightly more than the other, and suddenly the latch catches or the gate drags. The fix is deeper footings that anchor below the active clay layer, not shimming the hinges every season. We can reset the posts properly so the gate stays plumb through the wet and dry cycle.
Yes, and we do it regularly on the rural tracts near the Tarrant/Johnson county line. A solar gate opener needs a panel and battery bank sized to the actual shade and usage, not the minimum in the manual. We install the panel on a pole or post clear of the gate’s travel, wire the battery into a weatherproof enclosure, and test the system through a full open-close cycle. Solar power adds roughly $400-$900 to a gate opener installation in Kennedale.
A properly specified sliding gate operator handles spans from 12 feet to over 30 feet, but the operator has to be matched to the gate’s weight, not just its width. Long gravel driveways often mean wider gates for tractor or trailer access, and those need a heavier-duty operator than a standard residential unit. We measure the gate, weigh the load, and quote the operator that will actually move it for years.
Yes. Every automated gate installation we quote in Kennedale includes safety photocells across the gate’s travel path, and keypad entry is a standard option we install alongside the operator. Photocells stop the gate if a child, pet, or vehicle crosses the path. Keypads give you code-based entry without depending on a phone app or a buried loop detector. Both are included in the written quote before we start. Call (626) 649-4572 to schedule a free estimate at your property.
On a horse-property entry off Dick Price Road east of downtown Kennedale, our crew replaced a manually-hung heavy tubular-pipe cattle gate that an owner had strapped a residential-grade operator onto. The gate’s weight and long swing radius had bent the operator arm and cracked the post footing. We set a deeper hinge post footing, corrected the sag, and installed a heavy-duty LiftMaster swing gate operator sized for the pipe gate’s span and weight, wiring a keypad entry and safety photocell alongside it. That call is bread-and-butter for us on the rural tracts near the Tarrant/Johnson county line, and it’s why we treat Kennedale’s acreage entrances as the default job rather than the exception.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, in Kennedale and across southern Tarrant County. Call (626) 649-4572 for a free estimate. A live person answers, day or night.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Kennedale since 2009.