Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
A new driveway gate in Keller typically costs between $5,800 and $18,500, with most sliding and ornamental swing gate installations landing between $7,200 and $11,000. We install custom and builder-matched gates across Keller within 1 to 3 weeks of the first measure, depending on fabrication. Call (626) 649-4572 and we’ll walk you through it.
Keller is a particular place to work. Not because the addresses are hard to find, but because the gates here are rarely the same from one street to the next. Off Bear Creek Road you’ll find a quarter-acre of pipe rail and a corner-post hinge that’s been in the ground since before the subdivision boom. Two miles south, in a 1990s deed-restricted neighborhood, you’ll find a builder-grade ornamental iron gate on a discontinued Linear board. Both are Keller. Both need a different hand. We work both, and we’ll give you a written price before a single tool comes off the truck.
Why Latch & Post Gate Repair Is Keller’s Preferred Gate Installation Company
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been doing this work since 2009. Keller crews see the specific failure pattern of this city every week: a gate that sags from a heaving hinge post, an operator board that simply isn’t made anymore, a weld joint that snapped during the February freeze and was never engineered for it. That’s not a generic repair call. That’s a Keller call, and we answer it with parts and footings that anticipate the next season rather than just patching the last one.
The people who call us in Keller usually mention the same things: the floors, the kids, the dog, the nap schedule. So we built our on-site routine around that. Our background-checked, uniformed technicians operate under the Cedarwell C.A.R.E. values. That means shoe covers and drop cloths inside the home, a cleanup photo before we leave, quiet tools when there’s a sleeping child, and a written price delivered before any work begins. Every call is answered by a live person, 24 hours a day, seven days a week. Not a voicemail box.
Keller is a local market for us, not a radius we happen to cross. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office. That’s what lets us keep legacy Viking and Linear parts on hand for the subdivisions off Keller Parkway and Rufe Snow Drive, while also sending a fabricator’s crew out to a horse property in the north end of town. Two different Keller gates. One standard of care.
Sliding Gate Installation in Keller
Sliding Gate Installation in Keller is what we do most often on the larger lots along Bear Creek Road and in the Highlands of Keller, where a swing gate would arc out into the street or eat up too much of the driveway. A slide gate rides on a steel track or a cantilever rail system, and in Keller the smart choice is usually cantilever. That’s because a track-mounted slide gate sitting low to the ground will fight the freeze-thaw swing that hits this city harder than Fort Worth proper. Ice heaves the track, the gate catches, the operator burns out. A cantilever design carries the gate above the ground line. In Keller’s climate, that’s not an upgrade. It’s the standard that prevents the second service call.
We set the post footings for Keller slide gates 12 to 18 inches deeper than code minimums in other local cities, because the black gumbo clay here swells and shrinks aggressively through every wet-dry cycle. If the support post moves even half an inch, the gate starts dragging mid-travel. A few months later the operator motor is asking for more than it was built to give. The deeper footing is the quiet fix, and it’s one of the reasons we don’t redo our own work.
What the job involves
A Keller slide gate installation starts with a site measure, then a written price that includes the gate panel, the operator, the safety photocells, and the concrete work. We order the gate specifically for your opening width and your fence line height, then schedule installation once fabrication is complete. Most slide gate projects in Keller finish within a day on site, with the operator wiring done by a licensed technician who knocks before touching anything at your property.
What a Keller slide gate costs
A standard residential sliding gate in Keller runs $7,200 to $13,500 installed. That number moves with the gate’s weight, the operator grade, and whether you’re running a cantilever beam or a track. You’ll see the exact figure in writing before we start, and it’s always quoted and agreed before any work begins.
Gate Opener Installation in Keller
Gate Opener Installation in Keller often means replacing a builder-grade unit that was installed when the house was built in the late-1990s or early-2000s, and whose control board is now discontinued. The operator is the motor, the brain, and the safety system for your gate, and in Keller’s climate the motor and the board fail differently than they would in a milder city. Ice storms crack the housing. Heat cycles age the capacitors faster. And the black clay heave slowly knocks the gate out of alignment until the motor is straining every time it cycles.
We install openers from FAAC, BFT, Linear, and Viking, and we stock the compatible replacement boards and photo-eye systems that keep those older Keller gates running without a full retrofit. When a board is no longer manufactured and there is no compatible replacement, we’ll tell you that plainly and give you a written price for a full operator swap before we pull the old unit. No guesswork on the invoice.
Underground operator work
For a heavy custom ornamental gate in Keller, an underground operator is often the cleanest option. The motor sits below grade in a sealed vault, the gate swings on hidden hinges, and there’s no arm or piston mounted to the face of the gate. We install underground operators for custom driveway gates where the design calls for it, and we set the vault footer deep enough to ride out Keller’s soil movement.
Safety and code compliance
Every new opener we install in Keller meets the current UL 325 entrapment protection standards, including monitored photo-eyes and inherent entrapment sensing. That’s not an add-on. It’s the only way we install an automatic gate, and it’s part of the written scope on every quote. Gates that move automatically carry serious force, and a Keller gate opening onto a sidewalk or street needs the safety edges and photocells set correctly. That’s work for a trained technician, not a weekend project.
Trusted Brands We Service in Keller
We’re factory-trained on the brands families in Keller actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In practice, that means we don’t have to order a Viking board and have you wait a week with an open gate. We keep the common replacement parts for Keller’s aging mid-era operators close at hand, and our technicians walk onto the job knowing the specific failure points of a 2005 Linear slide operator versus a 2018 LiftMaster. The right fix happens on the first visit more often than not, which is what you should expect from anyone claiming to be a gate specialist.
Common Gate Installation Problems We See in Keller Homes
- Heaving hinge posts from black gumbo clay. Keller’s expansive soil swells when it rains and shrinks during the long North Texas droughts. That repeated movement levers posts out of plumb and makes a heavy gate sag and drag. We set footings 12 to 18 inches deeper than code minimums to keep the gate square across seasons.
- Discontinued control boards on 1990s and 2000s builders’ openers. The automatic gates installed during Keller’s growth surge off Rufe Snow Drive and Keller Parkway are now aging out all at once. GTO and mid-era Linear and Viking boards are frequently no longer manufactured, so the only honest repair is often a full operator swap.
- Freeze-thaw stress on ornamental iron and hydraulic actuators. Keller sits at a slightly higher elevation than Fort Worth proper, and the winter ice storms hit harder here. Weld joints snap and hydraulic housings crack on gates that were never built for that stress. We weld and reinforce those points during installation so the gate doesn’t fail again when the next hard freeze arrives.
- Deed-restricted subdivisions with strict gate and fence requirements. Much of Keller’s housing stock sits in HOA-governed subdivisions where gate style, height, and finish are defined in the covenants. We measure against those documents and match the existing ornamental pattern, so your new gate doesn’t trigger a violation letter.
Pricing for Gate Installation in Keller, TX
Here’s what gate installation actually costs in Keller. A standard pedestrian gate runs $1,100 to $3,200 depending on width and material. A swing driveway gate on ornamental iron runs $5,800 to $9,800 installed. A sliding gate, as above, lands between $7,200 and $13,500. A full custom fabricated gate with a new opener and safety system can reach $18,500 on the high end, particularly on the larger acreage lots where the gate is a custom weldment rather than an off-the-shelf panel. Every one of these numbers is delivered in writing before we begin, and the price you agree to is the price you pay. Estimates are free. Call (626) 649-4572 and we’ll come measure.
We Also Serve Cities Near Keller
While this page is written for Keller, our crews work the surrounding area daily. If you’re in Keller, Haslet, North Richland Hills, Roanoke, or Southlake, the same Gate Installation team serves your street with the same Care Promise. The black clay doesn’t stop at the city line.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Keller
In Keller we pour gate post footings 12 to 18 inches deeper than standard code minimums, usually 36 to 48 inches total depending on the gate’s weight and the location on the lot. The reason is the expansive black gumbo clay: it swells through the wet season and shrinks through the dry months, and a shallow footing will heave a hinge post out of plumb within two seasons. A footing that deep costs a little more in concrete, and it is the difference between a gate that stays square for a decade and one that starts dragging in year two. Call (626) 649-4572 and we’ll give you a written price for your specific gate.
Yes. Keller’s deed-restricted subdivisions, especially the ones built between roughly 1990 and 2010, tend to use a consistent ornamental iron pattern per street. We measure the existing pickets, rings, and scrollwork, then order a match from fabrication rather than settling for a close-enough panel. We also check the HOA’s published requirements before we cut anything, because a mismatched gate on the front of a Keller home is a visible problem the moment it’s hung. You’ll see the fabricator’s match in the written quote before we begin.
In most cases in Keller, the answer is yes, and we’ll explain why plainly. A mid-era GTO or Linear control board that is no longer manufactured has no reliable repair path, and the few aftermarket or used boards floating around are a gamble we won’t install. The honest fix is a full operator swap to a current LiftMaster, FAAC, BFT, Viking, or equivalent unit, with the safety photocells brought up to current UL 325 standards at the same time. We’ll give you that price in writing before we pull the old unit. Call (626) 649-4572 for a free measure.
Yes. For a heavy custom gate, especially on Keller’s larger lots where the gate is a substantial ornamental weldment, an underground operator is often the right choice because there’s no external arm or hydraulic piston to see, and the mechanism stays protected below grade. We install underground operators with the vault footer set deep enough to ride out Keller’s black clay movement. The gate opens smoothly and the front elevation stays clean. This is not a DIY project; it involves excavation, electrical work, and entrapment protection that only a trained professional should handle.
Yes, every opener we install in Keller adheres to the current UL 325 standard for automatic gate operators, which requires monitored entrapment protection. That means photocells at the gate path, inherent obstruction sensing in the motor, and safety edges where required. We commission the gate and test the full stop-and-reverse cycle before we leave, and the safety settings are documented in the written scope. Call (626) 649-4572 for a free estimate, and we’ll explain the specific requirement for your gate in plain terms.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Keller since 2009.