Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Hickory Creek
Gate installation in Hickory Creek usually runs between $2,800 and $11,000 depending on whether you’re replacing an existing driveway gate or building new from the post up. Most jobs take one to two days on site, and the written price is set before any work starts. We’re a Cedarwell-family gate specialist based in the DFW area, and our crews install driveway, pedestrian, sliding, swing, double, and security gates throughout Hickory Creek, from the cove streets off Lake Lewisville to the newer subdivisions east of I-35E. Call (626) 649-4572 and a live person answers, any hour.
What makes gate work different in Hickory Creek comes down to two things: lake humidity and clay soil. Homes on the south shore of Lake Lewisville sit in persistent moisture that ages steel hardware faster than it would in Argyle or Highland Village. And the Blackland Prairie clay under nearly every yard in Denton County swells after rain and shrinks in drought, which moves posts. A gate installed on a shallow footing will sag within a season or two. We account for both before we pour anything.
Why Latch & Post Gate Repair Is Hickory Creek’s Preferred Gate Installation Company
We focus on gates. Not fencing, not general handyman work, not a rotating cast of subcontractors. Latch & Post has been part of the Cedarwell family of independently owned gate specialists since 2009, and Cody Beckman runs our operation with a simple rule: every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we care about.
Our technicians are background-checked and uniformed, and they’re factory-trained on the brands families around Hickory Creek actually have: FAAC, BFT, Linear, Viking, and others. Before any work begins, you get a written price. While we’re on site, shoe covers go on before we step inside, drop cloths go down on the floor, and you get a photo of the clean-up before we leave. If a kid is napping, we’ll use quiet tools and work around the schedule. No upsell, no pressure. Every install carries the 365-Day Done Right Promise: if it isn’t right, we make it right.
We answer the phone live, 24 hours a day, seven days a week. No voicemail tree. When you call about a gate in Hickory Creek, you’ll talk to a person who can schedule the visit, confirm the written-price process, and tell you what to expect before the crew arrives.
Sliding Gate Installation in Hickory Creek
Sliding gate installation in Hickory Creek typically runs $3,500 to $9,500 for a complete system, including the fabricated steel or aluminum panel, track or cantilever hardware, operator, and safety edges. Sliding gates make sense on lakefront properties where a swing gate would need to clear a sloped driveway or block part of the yard when open. On a cove-facing lot off the lake side of Hickory Creek, space is often tight between the house and the water, so a slide gate that moves parallel to the property line preserves every foot. The panel glides on rollers instead of hinging outward, which means no arc of clearance to plan around.
Post Footings and the Blackland Clay Problem
Any slide gate carries its weight on a few steel posts and a ground track or a cantilever system. When Hickory Creek clay shrinks in August, a shallow post moves. Then the track goes out of level and the gate starts to bind. We set slide gate footings below the active clay zone and pour them with rebar so the rail stays true through freeze and drought. That’s the difference between a gate that rolls quietly for fifteen years and one that fights the rollers every season.
Fabrication and Finish for Lakeside Air
A slide gate near Lake Lewisville needs more than a coat of paint. We specify powder-coated or corrosion-resistant finishes on all hardware, hinges, and rollers because the humidity off the lake works on bare steel year-round. The panel itself is fabricated to the width of your opening, and we match the picket style and spacing to your existing fence or home’s ironwork so it doesn’t look like a bolt-on.
Gate Opener Installation in Hickory Creek
Gate opener installation in Hickory Creek generally lands between $1,400 and $3,800, whether you’re adding automation to an existing manual gate or replacing a dead operator on a custom driveway gate. Most Hickory Creek homes built between the 1990s and 2010s had automatic gates at construction, and those systems are now 15 to 25 years old. The motor, control board, and posts often reach end-of-life at the same time, so an opener job here frequently includes re-leveling the structure around it.
Replacing What Ice and Heat Already Wore Out
The February 2021 ice event did serious damage to outdoor gate equipment across Denton County. Actuators seized, gear housings cracked, battery backups drained and never recovered. Then the following summer drought shifted the soil and moved the posts those systems were mounted to. When we install a new opener in Hickory Creek, we check the post plumb and hinge alignment first, because no new motor will fix a gate that’s already racked out of square. Then we size the operator to the weight and cycle count of your specific panel.
Intercom, Keypad, and Camera Tie-In
A gate opener is only as useful as the access system wired to it. We commonly pair openers on Hickory Creek lakefront properties with a matched keypad, intercom, and camera at the pedestrian entrance, so both gates share one control scheme. If the property has a boat-launch access gate down by the water, we run both systems off the same intercom bus. One answer point, two gates.
Trusted Brands We Service in Hickory Creek
Our technicians are trained and stocked for the brands Hickory Creek homeowners already have: FAAC, BFT, Linear, and Viking, plus LiftMaster, Ghost Controls, and others. We keep common control boards, safety edges, and opener parts on our trucks so a repair or install doesn’t stall waiting on a parts order. When a FAAC hydraulic operator on a heavy swing gate fails, we usually have the components on hand to get it running the same visit. That matters when your driveway gate is also your primary access point.
Common Gate Installation Problems We See in Hickory Creek Homes
- Clay heave racks the hinge post. Blackland Prairie soil under Hickory Creek swells and shrinks between wet and dry seasons. A shallow post moves, the panel drops on the latch side, and the gate starts binding against the frame.
- Lake humidity eats standard steel hardware. Hinges, screws, and actuator mounts a few hundred feet off Lake Lewisville corrode years sooner than identical hardware would a few miles inland. New installs without corrosion-resistant finishes start showing rust streaks within two summers.
- Ice damage hides until the summer drought. February 2021 cracked gear housings and drained battery backups. The real trouble came months later when the soil dried and posts shifted again, turning a survivable winter into a mid-August failure.
- Two gates per address, twice the component wear. Cove-facing Hickory Creek lots often have a main driveway gate and a separate pedestrian or boat-launch gate. Both systems share the same age, the same humidity, and the same soil, so both tend to need attention around the same time.
Pricing for Gate Installation in Hickory Creek, TX
Here are honest ranges for Hickory Creek work: a standard pedestrian gate install runs $1,200 to $3,000. A fabricated single swing driveway gate on a new post and hinges is $2,800 to $6,500. A slide gate with operator and safety edges lands $3,500 to $9,500. A double swing gate in ornamental steel or aluminum starts around $5,000 and can reach $11,000+ when intercom, camera, and matched pedestrian access are included. The exact number depends on the panel width and weight, access to power, post condition, and finish. You’ll see the number in writing before we touch anything. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Hickory Creek
While this page is for Gate Installation in Hickory Creek, our crews regularly run jobs in Houston, San Antonio, Dallas, and Fort Worth. If your property sits just outside Hickory Creek on the lake side or up toward the I-35E corridor, call us and we’ll confirm coverage. Our Gate Installation team ships from the DFW office and schedules across the metro daily.
Serving Hickory Creek, TX - Our Local Coverage Area
We’re based in the Hickory Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Hickory Creek
The panel is almost never the real problem. Hickory Creek’s Blackland Prairie clay heaves the hinge post out of plumb each time the soil swells or shrinks, and a post that’s moved just one degree at the ground translates to an inch or more of sag at the latch side. Tightening or re-welding the panel without resetting the post footing means you’ll re-do the work within a season or two. We reset posts below the active clay depth so the geometry stays put. Call (626) 649-4572 for an exact quote.
Yes. Any automatic gate in Hickory Creek, Texas must have functional entrapment protection: photo eyes, safety edges, or a combination, per UL 325 standards. We install safety edges on every new automated gate, and we test them at both open and close limits before we leave. That’s non-negotiable on our installs, whether it’s a driveway gate or a boat-launch access gate.
Because lake-adjacent and cove-facing lots often carry a main driveway gate plus a separate pedestrian or boat-launch access gate down toward the water. Both gates need their own post work, hardware, and on many properties a shared intercom and camera link. One address, two systems. It’s a pattern we see constantly in Hickory Creek and only rarely a few miles inland in Lewisville or The Colony.
Not if the finish and hardware are specified for it. Bare or thinly painted steel near the lake corrodes fast, so we use powder-coated panels and corrosion-resistant hinges, rollers, and actuator mounts on Hickory Creek installs. The right spec adds modestly to the price and buys years of clean operation. We’ll show you the exact material difference in the written quote before any work starts.
A swing gate is usually less expensive up front but needs a wide, flat arc of clearance to open, which is often in short supply on sloped lakefront lots. A slide gate hugs the property line and works better on tight or sloped driveways, but the track and cantilever posts must be set deeper to stay level as the clay moves. We’ll assess both options for your specific driveway and show you the cost difference in writing. Estimates are free at (626) 649-4572.
Contact Latch & Post Gate Repair
If you need gate installation in Hickory Creek, call (626) 649-4572. A live person answers around the clock, every day. Cody Beckman and our team will schedule a visit, walk the site with you, and put a written price in your hand before any work begins. Free estimates, no pressure, and the 365-Day Done Right Promise on every install.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Hickory Creek and the Dallas-Fort Worth area.