Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLatch & Post Gate Repair: Steady Work for Heavy Gates in Hickory Creek
Gate repair in Hickory Creek means dealing with two things most inland towns never face: Lake Lewisville humidity eating at iron hardware, and Blackland Prairie clay heaving posts out of plumb. A typical driveway gate repair here runs $220-$480, while gate welding on ornamental iron usually lands between $180 and $390 per section. Those are real numbers you’ll see in writing before any work starts. If your gate is binding, sagging, or dead after the last storm, call Latch & Post at (626) 649-4572 and a live person will answer, day or night.
Why Hickory Creek Calls Latch & Post for Gate Work
We’ve been doing Gate Repair in this community long enough to know that a gate on Turbeville Road ages differently than one off Crestcove Drive. The closer you sit to the water, the faster the corrosion sets in. That’s why our technicians arrive in Hickory Creek with replacement hinges, post brackets, and actuator components already on the truck, selected for lakeside exposure rather than generic inland conditions. We don’t guess. We stock for the specific failure modes this town produces.
Cody Beckman, who leads our team, built Latch & Post around a simple idea: a gate company should leave your property cleaner than it found it. Every Hickory Creek visit includes shoe covers and drop cloths, a written price before work begins, and a photo of the cleanup before our technician pulls out of the driveway. It’s the Cedarwell C.A.R.E. routine: Clean up like it’s our own home. Ask before we move anything. Respect the family’s time and quiet hours. Explain the price before the work. Homeowners with kids and dogs notice the difference immediately.
Our Hickory Creek customers often tell us the same thing: another company came out, quoted one number, and the invoice landed higher. That doesn’t happen with us. The quote is the price. It’s written down. And every repair is covered by our 365-Day Done Right Promise. If it isn’t right, we make it right, no argument.
Driveway Gate Repair in Hickory Creek
Driveway Gate Repair here usually means one of three jobs: re-aligning a gate that the clay soil has shifted, replacing corroded hinges and brackets on ornamental iron, or getting a dead operator running again. Hickory Creek homes built in the 1990s and 2000s are now at the point where motors, control boards, and hinge posts fail in the same season. A full motor replacement on a swing gate typically runs $650-$1,150 installed. A hinge replacement with post reinforcement runs $180-$340 depending on gate weight.
Re-aligning Swing and Slide Gates
When the clay under a post swells after spring rain and then shrinks through July and August, the post tilts. That throws the gate’s travel arc off and the operator starts straining. We re-set and reinforce the post footing with deeper concrete and a steel bracket, then re-align the gate and adjust the limit stops. On most Hickory Creek properties the fix holds because we address the soil movement, not just the visible tilt.
Corroded Hinge and Post Repair
Lakeside humidity works into the metal where the hinge meets the post. You’ll see rust staining, hear grinding when the gate moves, and eventually the hinge pin fatigues. On an ornamental iron gate that weighs 300 or 400 pounds, a failed hinge is dangerous. We replace both the hinge and the mounting plate, sealing the new hardware against moisture. Where the post itself has rusted through at the base, that’s a gate welding call.
Gate Welding in Hickory Creek
Gate Welding is the service that saves an iron gate when replacement parts don’t exist. Hickory Creek has a lot of custom and semi-custom ornamental work, and once a post base rusts out or a picket snaps at the weld seam, a mass-produced bracket won’t fix it. Our welders cut out the compromised section and weld in matched steel, then grind, prime, and paint the repair to blend with the original finish. Basic weld repairs start around $180 per section; a post base rebuild with reinforcement typically runs $300-$550 depending on gate size and access.
Post Base and Hinge Plate Welding
The post base is where lakeside moisture collects, and it’s the first place iron gates fail. We cut the rotted section back to solid steel, weld a new base plate and hinge mount, and coat the repair. On most jobs we also drill a small weep hole so water stops pooling in the same spot. Cody Beckman checks every weld himself before the technician declares it done.
Picket, Rail, and Decorative Element Repair
Iron gates on Hickory Creek lakefront homes frequently have scrollwork, finials, and arch details that were fabricated locally and can’t be ordered from a catalog. A snapped scroll or cracked rail weld gets ground back, re-welded with a matching rod, and sealed to slow future rust. This is quiet, careful work, and we schedule it around your family’s routine if nap time or a reactive dog is in the picture.
Trusted Brands We Service in Hickory Creek
Our technicians are factory-trained on FAAC, BFT, Linear, and Viking operators, along with LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. For Hickory Creek customers that matters, because the right controller board for a FAAC swing operator behaves differently than a Linear slide unit, and guessing wastes your afternoon. We keep common boards, safety photocells, and actuator arms stocked on our DFW-coordinated service vehicles so most repairs here finish in one visit. When a part has to be ordered, we tell you that up front, with the lead time in writing.
Common Gate Repair Problems We See in Hickory Creek Homes
- Rust-seized hinges on lakefront iron gates. Persistent humidity off Lake Lewisville corrodes the hinge pin and plate. The gate binds, the operator strains, and within a season the pin can snap entirely under the gate’s weight.
- Posts heaved out of plumb by Blackland Prairie clay. The soil expands dramatically in wet months and contracts in drought. Posts shift, gates drag on the ground or miss the latch, and limit switches chatter.
- Plastic gear housings cracked after ice events. The February 2021 storm that pounded Denton County cracked gear housings and killed battery backups across Hickory Creek. When the next freeze arrives, we replace plastic internals with metal where the design allows.
- Two gate systems failing at once. Many cove-facing Hickory Creek addresses have both a main driveway gate and a second pedestrian or boat-launch gate. Each has its own operator, keypad, and safety edges, and both take the same humidity and soil movement stress.
Pricing for Gate Repair in Hickory Creek, TX
| Service | Typical Hickory Creek Range |
|---|---|
| Hinge replacement with post reinforcement | $180 - $340 |
| Gate realignment and limit adjustment | $160 - $290 |
| Driveway gate motor replacement | $650 - $1,150 |
| Gate welding (per section) | $180 - $390 |
| Control board replacement | $210 - $470 |
| Safety photocell replacement and alignment | $120 - $240 |
A note on cost: gate weight and post condition drive the price more than anything else in Hickory Creek. A lightweight aluminum tube gate costs less to repair than a 400-pound custom iron swing gate. If your post is rusted through or heaved, the job includes welding or concrete work, and that’s reflected in the written quote. Every estimate is free. The number you sign is the number on the invoice. Call (626) 649-4572 and we’ll send a technician to measure, diagnose, and quote on site.
We Also Serve Cities Near Hickory Creek
Our crews serve Hickory Creek and the surrounding North Texas suburbs daily. We also work in Hickory Creek proper as well as Dallas, Fort Worth, Houston, and San Antonio on scheduled visits. If your property sits near Lake Lewisville or further out along the DFW arc, call us at (626) 649-4572 and we’ll confirm whether we can reach you and when.
Serving Hickory Creek, TX - Our Local Coverage Area
We’re based in the Hickory Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hickory Creek
Because Hickory Creek faces a combination no inland suburb deals with: Lake Lewisville humidity accelerates corrosion on hinges, brackets, and actuator internals, while Blackland Prairie clay soil expands and contracts enough to shift the gate posts themselves. A repair that only addresses the rust or only addresses the misalignment will fail again because the other problem is still working underneath it. We diagnose and fix both at once, which is why our Hickory Creek repairs tend to hold.
First, check your breaker and any battery backup. Ice events like the February 2021 storm often drain backup batteries, and a cold-damaged gear housing will sound like a low grinding noise when the operator tries to run. Do not force the gate open by hand, because a cracked plastic gear can fail under pressure and let the gate swing free. Call us at (626) 649-4572 and we’ll send a technician to Hickory Creek to inspect the operator and replace the damaged internals.
In most Hickory Creek cove-front homes, yes. The pedestrian or boat-launch gate has its own operator, its own keypad, and its own set of safety photocells, and it’s exposed to the same humidity and soil movement as your main gate. Repairs to one system don’t transfer to the other. We’ll inspect both during the same visit and give you a combined written quote if both need work.
Look at the gap between the gate and the post when the gate is closed. If the gap is wider at the top than the bottom, or if the gate drags on the driveway on one side, the post has moved. Rust staining at the base of the post is a second warning. If left alone, the post will tilt far enough that the operator’s limit switch can’t compensate, and the motor will burn out trying. We re-set and reinforce posts before that happens.
UL 325 requires automatic gates to have at least two independent safety devices: typically a set of non-contact sensors like photocells or edge sensors, plus a contact safety edge or a reversing mechanism that opens the gate if it hits an obstruction. Gates in Hickory Creek with children and pets near the driveway need working, properly aligned safety edges on both sides. We check and align these on every service call. If your safety sensors are missing or bypassed, we’ll flag it.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, providing gate repair and installation to Hickory Creek and the surrounding DFW region since 2009.