Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Haslet
Gate installation in Haslet runs $2,400 to $9,800 for most residential projects, depending on the gate style, automation, and whether your HOA requires ornamental iron. A standard single swing gate with a basic operator typically lands around $3,200 to $4,600 here. We’ll give you the exact number in writing before any steel gets ordered. If you’re in Sendera Ranch, Northstar, or anywhere off Avondale-Haslet Road, call (626) 649-4572 and we’ll walk the site with you.
Haslet is different from Keller or Roanoke in one specific way: the Alliance Texas corridor runs right through the middle of daily life here. That means we install heavy commercial slide gates for logistics facilities near I-35W in the morning, then drive ten minutes to a Sendera Ranch subdivision where an HOA needs a specific ornamental double gate matched to architectural standards. Few gate companies work both sides of that line. We do, and we’ve been doing it since 2009 as part of the Cedarwell family of independently owned and operated gate specialists.
Why Latch & Post Gate Repair Is Haslet’s Preferred Gate Installation Company
Homeowners in Haslet call us because we handle the part of the job that is not about the gate at all: the HOA. Most local gate installations require architectural approval before fabrication begins, and we prepare that submittal packet with the finish color, height, style, and latch detail your management company wants to see. When a Haslet homeowner gets a rejection letter after buying a gate, it is almost always because nobody submitted the paperwork first. That does not happen on our jobs.
Our technicians come background-checked and uniformed, and they work under the Cedarwell C.A.R.E. values: clean up like it is our own home, ask before we move or touch anything, respect the family’s time and quiet hours, and explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside. If your kids are napping, we’ll run quiet tools. If your dog is loose in the yard, we’ll knock and wait. And before we leave, we take a photo of the clean-up so you can see exactly what we saw.
Every installation is covered by the 365-Day Done Right Promise. If the gate is not right, we make it right. No argument, no fine print.
Gate Fabrication in Haslet
Gate fabrication in Haslet usually means building an ornamental iron driveway gate to match a specific HOA standard in neighborhoods like Sendera Ranch or the communities along Parkview Drive. The work involves cutting and welding steel frame members, fitting the infill pickets or panels, mounting the gate on hinge posts, and applying a finish that meets the subdivision’s approved color palette. We do not build wood or vinyl gates. We build steel and iron gates that hold up to Haslet’s specific soil and traffic conditions.
Custom Ornamental Iron Drive Gates
A new custom iron double drive gate for a Haslet home typically runs $4,100 to $9,800, including fabrication, finish, mounting hardware, and the HOA submittal package. Single pedestrian gates are usually $1,100 to $2,300. The price depends on the gate’s width, height, the style of pickets or scrollwork your HOA requires, and whether we’re automating the gate at the same time.
Haslet’s subdivisions from the 2000s through 2020s were built with ornamental iron fencing as the dominant street-facing material. That means a replacement gate usually has to match an existing fence line, not stand on its own. We take the finish swatch, the picket spacing, and the top detail from your existing fence and build the gate to match, then package it for architectural review.
Post Footing Work in Black Clay
The single most important part of any gate fabrication job in Haslet is what happens below grade. The expansive black clay soils across this part of Tarrant County heave and contract dramatically between wet North Texas springs and drought-stressed summers. A gate post set in a shallow footing will lean or rack within three to five years, even if the gate itself is beautiful. We pour deeper footings than what a typical handyman would, and we set the hinge posts in concrete that accounts for clay movement. That is the reason our gates stay square.
Automatic Gate Installation in Haslet
Automatic gate installation in Haslet means pairing a fabricated or existing gate with a motorized operator, safety photocells, and the access hardware your household or HOA requires. Most residential automatic driveway gates in Haslet run $2,800 to $6,500 for the operator, mounting, safety equipment, and programming. The exact figure depends on whether it is a swing or slide configuration, the weight of the gate, and the brand of operator.
Swing Gate Operators and Safety Photocells
A swing gate operator like a LiftMaster or Viking unit opens a hinged gate using an arm mounted to the post. In Haslet, we also install safety photocells on every automatic gate. The cells create an invisible beam across the gate’s path. If a child, pet, or car breaks that beam while the gate is moving, the gate stops and reverses. This is not optional equipment. It is a safety requirement and a feature every parent in a neighborhood like Bryson or Creekside should expect.
Integration with HOA Access Systems
In gated Haslet communities, the operator has to talk to the HOA’s existing entry system. That means the keypad protocol, the resident code format, and the loop detector at the main entrance all have to be programmed to work together. We handle that integration on the initial install so the gate operates on day one. When a shared entry system gets wired or programmed wrong, residents end up stuck at the main entrance or the gate cycles endlessly. We program against the actual system the HOA uses, not a generic default.
Trusted Brands We Service in Haslet
We factory-train our technicians on the brands Haslet homeowners and Alliance Texas facility managers actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Haslet customers, we keep common Viking, DoorKing, and Ghost Controls parts stocked locally so a new operator or a replacement access control board does not mean waiting a week for freight. When a commercial slide gate at a distribution center off I-35W goes down, uptime matters. When a residential swing gate in Sendera Ranch fails, nobody wants to leave a car outside overnight. Both jobs move faster when the part is already here.
Common Gate Installation Problems We See in Haslet Homes
- HOA rejection before the gate is even built. Haslet HOAs in master-planned communities often require architectural approval for gate style, height, and finish. We prepare and submit that package before fabrication, so the gate passes review the first time.
- Posts that lean within three to five years. The expansive black clay under Haslet heaves in wet springs and contracts in summer drought. Shallow post footings cannot handle that movement. We set deeper footings and use hinge-post concrete that resists racking.
- Shared entry system conflicts in gated communities. When a new gate operator is installed without matching the HOA’s existing keypad and loop detector protocol, residents get stuck or the gate cycles. We program against the actual system on site, not a default config.
- Wrong gate for the driveway width. A double swing gate on a standard Haslet driveway might look right but swing into the street slope or block the sidewalk. We measure both panels and the approach slope before ordering anything.
Pricing for Gate Installation in Haslet, TX
A single ornamental iron swing gate for a Haslet driveway typically runs $2,400 to $4,600. A double gate is usually $4,100 to $9,800. Automatic operators add $2,800 to $6,500 depending on the brand and whether you need a slide or swing configuration. Pedestrian gates run $1,100 to $2,300. Commercial slide gates along the Alliance corridor cost more because the panels are heavier, the operators are rated for higher cycle counts, and the safety requirements are stricter. Every quote includes the written price before any work starts, and that price is the price. You will see the full number on paper before we order steel or dig a footing. Estimates are free. Call (626) 649-4572 for yours.
We Also Serve Cities Near Haslet
While this page focuses on gate installation in Haslet, our crews regularly work Gate Installation jobs in Keller, Roanoke, Newark, and North Richland Hills. If you live in one of those cities, the same written-price process, the same C.A.R.E. clean-up routine, and the same 365-Day Done Right Promise apply. Learn more about our full service area and how we approach every Gate Installation in Haslet project differently based on local conditions.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Haslet
Yes, in almost every Haslet subdivision. Most 2000s to 2020s master-planned communities require architectural approval for gate style, height, finish, and sometimes the operator housing. We prepare the submittal packet before fabrication begins, so you’re never stuck with a finished gate that the HOA rejects. Call (626) 649-4572 and tell us your community name; we’ll confirm the process and handle the paperwork.
The expansive black clay soils across this part of Tarrant County move more than people expect. A shallow post footing heaves in wet springs and contracts in summer drought, which racks the gate out of alignment. The gate itself is often fine; the post footing is the problem. We set deeper footings and use concrete designed for clay movement. Call us and we’ll inspect the post, tell you what is happening below grade, and give you a written fix.
Yes. We program new operators against the HOA’s existing keypad protocol, resident code format, and loop detector. This is standard practice on our automatic gate installations in Haslet. If your community uses a specific brand for its entry system, we integrate with it on the initial install so residents are not left cycling the gate at the main entrance. Call (626) 649-4572 with your HOA’s management contact and we’ll coordinate directly.
Commercial slide gates along the I-35W corridor carry more weight, higher traffic cycles, and stricter safety requirements than anything on a residential driveway in Haslet. Panels are longer and heavier, operators are rated for continuous cycling, and the safety system typically includes multiple photocells and a monitored entrapment protection circuit. We handle both types, and the commercial side moves on a different timetable, usually coordinated with the facility manager around loading dock schedules.
Yes, every automatic gate we install in Haslet includes safety photocells. The cells stop and reverse the gate if anything breaks the beam while it is moving. That protection matters when there are kids, pets, or delivery vehicles on the property. Photocells are included in our automatic gate installation quote, not sold as an add-on. Call (626) 649-4572 for a written estimate.
Call for a Free Estimate in Haslet
If your HOA is asking for architectural approval, if your post has heaved in the black clay, or if you just want a straight written price on a new gate, call (626) 649-4572. A live person answers, day or night. We’ll come to Haslet, measure the driveway, check the soil at the post locations, review your HOA requirements, and hand you a written number before you commit to anything. No pressure. No surprise invoice. Just a gate that is fabricated to the neighborhood standard, set on footings that hold, and backed for a full year by the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Haslet and the Dallas-Fort Worth metro since 2009.