Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Felida
Gate installation in Felida runs $2,400 to $11,000 for most residential projects, with a typical custom driveway gate on a powered opener landing between $4,800 and $7,500. The spread comes from gate size, material, operator brand, and whether the post footings need to go below the frost line on a sloped driveway. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we’ve been installing gates in Clark County since 2009. Our crews work throughout Felida, from the older lots off NW 122nd Street to the newer custom builds near the Salmon Creek greenbelt, and we schedule within a few days of your call. The estimate is free and the written price is in your hand before any work starts. Call (626) 649-4572 to set one up.
Key Takeaways
- Custom gate installation in Felida typically costs $4,800-$7,500 for a standard driveway gate with automation.
- Downhill cross-slope driveways need post footings pinned below the frost line or gates gap out within one wet season.
- Written price, shoe covers, drop cloths, and a cleanup photo are included on every job. No exceptions.
- Factory-trained on Linear, Viking, Ghost Controls, and DoorKing operators.
Why Latch & Post Gate Repair Is Felida’s Preferred Gate Installation Company
Felida homeowners call us because the gates here are not the flat-lot aluminum kits you see in planned subdivisions. These are heavy custom gates on sloping driveways, often paired with intercoms, cameras, and operators that have been quietly wearing out for two decades. Our technicians know the failure pattern before they pull up: a hinge post that has crept downhill under frost-heave, a slide track buried in Douglas fir needles, a Viking operator that trips its safety sensor every time a Gorge wind gust hits the gate mid-swing.
We also know how to leave a property the way we found it. Every visit includes shoe covers and drop cloths, and we photograph the cleanup before we leave. Cody Beckman leads our team, and he holds every technician to the Cedarwell C.A.R.E. values: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. Live people answer the phone around the clock, so a call on a Sunday night about a gate that will not close gets answered by a person, not a voicemail.
Automatic Gate Installation in Felida
Automatic Gate Installation in Felida means matching an operator to a gate that was probably built for this specific piece of ground, not a lot in a master-planned community. Most Felida driveways run downhill away from the road, and a swing gate set on that cross-slope needs an operator arm and hinge geometry that can hold the leaf square when the soil swells and shifts through winter. We install underground and ram-mounted operators, set the open and close limits for the actual slope, and test the entrapment protection under load. Standard automation on a single swing gate in Felida runs $3,200 to $5,800 including the operator, safety edges, and programming.
Operators on Sloped Driveways
A Gate Installation on a Felida hillside lot starts with the post, not the motor. If the post footing does not reach below the Clark County frost line, the post tilts downhill and the operator works against a leaf that will not sit level. We auger deeper footings, pin them below the frost line, and set the operator arm to compensate for the cross-slope so the gate latches square in February, not just in July.
Intercom, Camera, and Entry Integration
Many Felida gates are part of a larger entry system: intercom, camera, keypad, and a phone app for remote opening. We run the low-voltage wiring, pair the operator with your existing hardware, and test the whole sequence before we leave. If you are adding a new gate where none existed, we coordinate the power run, underground conduit, and the safety sensors so the install passes inspection the first time.
Gate Installation Services in Felida
Gate Installation Services in Felida cover the full range of what gets built here: driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. A typical custom cedar or steel driveway gate on a powered opener runs $4,800 to $7,500 installed, including the gate itself, hinges, operator, safety edges, and programming. Wrought-iron double gates with heavy ornamental work can reach $9,000 to $11,000 when they include pier posts, custom scrollwork, and a matched operator pair.
Custom and Ornamental Driveway Gates
Felida has a high concentration of custom and semi-custom homes from the 1990s through the 2010s, and the gates at those properties are usually built to match the house. When we fabricate a replacement, we match the existing picket profile, powder coat the steel, and set the hinges for a quiet swing on a gate that may weigh several hundred pounds. Heavy bespoke gates need operators rated for the actual leaf weight, not the optimistic number in a generic chart.
Pedestrian and Side Gates
Separate walk gates keep the main driveway gate from cycling every time a kid runs to the mailbox. We build and install pedestrian gates in cedar, steel, or aluminum, and we can add a keypad or magnetic lock that ties into the same access system as the driveway gate. Pedestrian gate installation in Felida typically runs $900 to $2,200 depending on material and hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Felida
We are factory-trained on the operators Felida homes actually run: Linear, Viking, Ghost Controls, and DoorKing among them. We keep common control boards, safety sensors, remotes, and hinge hardware on hand so a repair in Felida does not wait on a part from a distribution center. When a brand-specific part is not on the truck, we source it directly through our Cedarwell supply network and schedule the follow-up before we leave. That means fewer days with a gate propped open and a faster return to a closed, secure property line.
Common Gate Installation Problems We See in Felida Homes
- Hinge posts tilting downhill under winter soil movement. Felida’s rain-saturated clay and hillside grades push posts outward through repeated freeze-thaw cycles. A post set too shallow will lean within a year, and the gate stops latching.
- Conifer debris packing into slide tracks and operator racks. Douglas fir and redcedar needles fall onto tracks all year here, and a slide gate’s rack and pinion will bind when the teeth fill with compacted litter. The operator then works harder until the limit switch trips mid-travel.
- Gorge wind gusts tripping safety sensors on exposed driveways. Felida lots with open western exposure catch lateral wind from the Columbia River Gorge. A gust can push the gate leaf enough to trigger the photocell or obstruction sensor, stopping the cycle halfway.
- Original automation from the 2000s reaching end of life. A large share of Felida’s gates were automated when the homes were built, and that hardware is now 15 to 25 years old. Operators that cannot reliably close are the most common reason a new Gate Installation replaces a repair, especially when the old operator’s safety edges no longer pass a release test.
Pricing for Gate Installation in Felida, WA
A typical single swing driveway gate with automation in Felida runs $4,800 to $7,500. A double wrought-iron gate with ornamental steel, pier posts, and dual operators lands between $7,800 and $11,000. Pedestrian gates run $900 to $2,200, and automating an existing manual gate runs $3,200 to $5,800. What moves the number on sloped Felida lots is the footing depth: a post that must reach below the frost line on a cross-slope means more concrete, more augering, and more time. You will see that figure in writing before we start, and it will not change unless you change the scope. Call (626) 649-4572 for a free, written estimate on Gate Installation.
We Also Serve Cities Near Felida
Our crews serve Felida and the surrounding metro, including Seattle, Spokane, Tacoma, and Vancouver. Dispatch and scheduling are coordinated from our Seattle office, with local crews serving Felida directly.
Serving Felida, WA - Our Local Coverage Area
We’re based in the Felida area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Felida
Yes. On a downhill cross-slope, the hinge post carries the gate’s weight at an angle, and soil movement over a wet winter pushes that post outward unless it is set below the frost line. We auger a deeper footing and pin the post accordingly so the gate stays square through February. Call (626) 649-4572 for a specific assessment of your slope.
Frost-heave and rain-saturated soil tilt the downhill hinge post outward each winter, and the gate leaf follows, pulling the latch out of line. It is a Clark County rural adjustment call we make every year, and the fix usually involves resetting the post at proper depth rather than just cranking the hinges. Call us and we will correct the root cause, not just the symptom.
Watch the bottom track on a sliding gate and the hinge pockets on a swing gate. Packed needles bind the rack and pinion, and wet leaf buildup against steel pivot pins accelerates corrosion. Clear debris from tracks and hinges seasonally, and if the gate starts laboring, get it looked at before the operator fails. We can advise on sealing and drainage during the install.
Yes, and this is not optional. Automatic gates must have safety edges or photocells, or both, that reverse the gate when they meet resistance or break the beam. It is a code requirement and a real safety issue for kids and pets. We install the entrapment protection as part of the job and test it before we leave. Estimates are free at (626) 649-4572.
When a gate of that age has a rusting leaf, leaning hinges, and an operator that will not pass a safety-edge release test, a new Gate Installation is usually the better value. Replacing just the operator on a warped gate means putting new hardware on a dying structure. We will give you a straight written comparison of repair versus replace, with dollar figures for each. Call (626) 649-4572.
Why Felida Driveways Decide the Gate, Not the Other Way Around
Because most Felida driveways run downhill away from the road, swing gates are set on a cross-slope where the hinge post itself tilts outward under winter frost-heave and saturated soil. A gate we install dead-plumb in July can gap at the latch by February unless it is founded below the seasonal frost line and poured to resist slope-side soil movement. That single detail, post depth, is the difference between a gate that holds square for a decade and one that needs a service call every spring. Flat-suburb gate shops that build on level lots in planned subdivisions rarely account for it. We do, because Felida is where we work.
On a wooded hillside lot off NW 36th Avenue, we replaced a 16-foot cedar-and-steel swing gate on a LiftMaster operator that had been sledding out of level for years as its original hinge post leaned downhill. We pulled the post, augered a deeper footing pinned below the frost line, re-hung the leaf with heavier adjustable hinges, and reset the operator arm. The gate now latches square through the wet season instead of gapping by February. That job is the Felida pattern: the problem was never the gate. It was the ground underneath it.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Felida since 2009.