Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Everett
A new driveway or pedestrian gate in Everett typically runs $1,800 to $6,500 installed, depending on material, size, and whether you’re adding automation. Most standard installations take one to two days from post-setting to final swing test. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we’ve been installing gates in this marine climate since 2009. If your gate is sagging, rusting, or simply done, call (626) 649-4572 for a written quote before any work starts.
Everett is not Lynnwood. The salt air off Port Gardner Bay changes what a gate needs, and we spec materials accordingly. More on that below.
Key takeaways:
- Full gate installations in Everett run $1,800-$6,500; electric operators add $1,200-$3,500.
- Properties within a mile of the waterfront need 316 stainless and powder-coated aluminum, not basic galvanized steel.
- We provide a written price before any work begins. Always.
- Live person answers 24/7 at (626) 649-4572.
Why Latch & Post Gate Repair Is Everett’s Preferred Gate Installation Company
Everett homeowners call us because we talk about salt air and hinge-post rot before we talk about style. That’s the conversation that matters here. Our team works in neighborhoods like Bayside, Riverside, and Silver Lake every week, and we see the same pattern: a gate that looked fine three years ago is now dragging, binding, or refusing to close. The cause is almost always corrosion or a rotted post, not a broken panel.
We’re independently owned and operated within the Cedarwell family, and every technician is background-checked, uniformed, and trained on the brands Everett households actually own. We carry parts for Linear, DoorKing, and Ghost Controls operators in our service vehicles, so we’re not waiting on a shipment when your gate won’t open. Cody Beckman runs our installation teams with one rule: leave the property cleaner than we found it. That means shoe covers, drop cloths, and a photo of the clean-up before we pull out of your driveway.
And every installation is covered by the 365-Day Done Right Promise. If something isn’t right, we make it right. No fine print.
Gate Installation Services in Everett
Gate Installation Services in Everett start with a site walk, not a brochure. We check the existing post footings, measure the opening, and talk about what the marine air on your street is doing to metal. Then we give you a written price. A standard pressure-treated or cedar driveway gate runs $1,800-$3,200. Powder-coated aluminum starts around $2,800. Ornamental steel with marine coatings runs $3,500-$6,500. Your exact number is on paper before we touch a post hole.
Driveway and Sliding Gate Systems
Driveway gates in Everett’s older neighborhoods often need new post footings because the original 1950s concrete has cracked from decades of wet-season soil movement. Sliding gates work well on level lots but need a clean, debris-free track. We set cantilever systems where drainage is poor, so the track never sits in standing water.
Swing, Double, and Pedestrian Gates
Swing gates remain the most common style in central Everett, where lots are narrower and a single panel fits the space. Double gates need matched hardware sets and a solid center post. Pedestrian gates get the same corrosion treatment as driveway gates: stainless hinges and sealed hardware, because a gate three blocks from the Sound still catches salt.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Everett
Electric Gate Installation in Everett is where the marine climate bites hardest. Salt-laden air gets into control boards, corrodes terminal connections, and shorts photocells and loop detectors years earlier than inland. A new electric operator and full automation package here runs $1,200-$3,500 on top of the gate itself, and we always quote what works on the coast, not what works in Bellevue.
Operators and Access Control
We install swing, slide, and overhead operators matched to the gate type and your access patterns. For Everett homes with kids and dogs, we set safety edges and photocells to UL 325 standards so the gate reverses at any resistance. Keypads and remote receivers get weather-sealed enclosures, because plain ones fail within two wet seasons here.
Salt-Air Component Protection
Before we mount any operator, we treat every exposed terminal and fitting. That means dielectric grease on connections, sealed motor housings, and 316 stainless fasteners. We’d rather spend an extra $40 on marine-grade hardware than come back in three years to find a board that looks like it was pulled from a shipwreck. We offer free measures and written estimates for every electric gate job in Everett.
Trusted Brands We Service in Everett
We stock replacement parts locally for the brands Everett families rely on most. Our techs are factory-trained on Linear, DoorKing, and Ghost Controls, and we keep common boards, arms, and remotes on hand for these systems. If your existing operator is a Viking, we’ll service it and swap in marine-grade connectors where corrosion has set in. You shouldn’t have to replace a whole system because one component failed. And when we install new equipment, we choose the operator that fits the coastal exposure, not the one with the best rebate.
Common Gate Installation Problems We See in Everett Homes
- Salt-corroded hinges and latch hardware. Properties near the Port of Everett and Naval Station see galvanized steel rust out in five to seven years, roughly half the inland lifespan. We replace with 316 stainless and powder-coated aluminum as standard on waterfront jobs.
- Rotted hinge posts on 1940s-1970s wooden gates. Central Everett’s post-war homes often still have original cedar posts, and years of 35-plus inches of annual rain have softened the grain. The panel looks fine, but the post is gone inside.
- Operator boards and photocells shorted by humidity. The fall-through-spring overcast keeps relative humidity high, and control boards corrode from the inside. We see far more board failures here than in Lynnwood or Marysville.
- Binding and swelling on wooden gates every wet season. Cedar and fir boards absorb moisture, swell against the frame, and crack at the hinge screws. Proper clearance and sealed end grain at installation prevents most of it.
Pricing for Gate Installation in Everett, WA
Here’s what Everett homeowners can expect for a new gate, installed and working:
| Service | Typical Price Range (Everett) |
|---|---|
| Basic pedestrian gate (wood, standard hardware) | $1,800-$2,800 |
| Driveway gate (cedar or pressure-treated, single swing) | $2,200-$3,800 |
| Double driveway gate (matched pair) | $3,200-$5,500 |
| Powder-coated aluminum gate (coastal spec) | $2,800-$4,800 |
| Ornamental steel gate with marine coating | $3,500-$6,500 |
| Electric operator and full automation | $1,200-$3,500 added |
What changes the number: footings, slope, operator type, and whether we’re matching an existing fence line. A gate one block from the water costs more in hardware than the same gate in Silver Lake, because stainless and powder-coated aluminum aren’t optional near the Sound. You’ll always see your exact price in writing before we start. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Everett
We serve Everett and the surrounding communities, including Marysville, Lake Stevens, Mukilteo, and Snohomish. Dispatch and scheduling are coordinated from our Seattle-area office, with crews working locally here in Everett throughout the week. If you’re a few minutes north or east of the city line, call anyway.
Serving Everett, WA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Everett
Because the salt-laden marine air off Port Gardner Bay deposits a fine layer of sodium chloride on every exposed metal surface, and the persistent humidity from October through April keeps it damp and chemically active. Galvanized hinges and even some “stainless” grades oxidize in five to seven years near the waterfront, roughly half the lifespan they’d see in Bellevue or Marysville. We spec 316 stainless fixings and powder-coated aluminum on any job within a mile of the Sound. Call (626) 649-4572 and we’ll tell you if your location qualifies as coastal exposure.
In most cases, the panel is fine and the hinge post is the problem. Central Everett’s 1940s-1970s homes often still have original cedar posts, and after decades of rain they rot from the center out. Replacing the post with pressure-treated lumber or steel in a concrete footing fixes the sag permanently. We recently did exactly this for a 1950s home near the Bayside corridor by the Port of Everett: the original hinge post had rotted through and the gate was dragging. New post, marine-grade hinges, done.
Yes. Under UL 325 and federal safety standards, every automatic gate in Everett requires entrapment protection: photocells, safety edges, or both, plus a reversing mechanism that triggers on contact with any obstacle. We install and test these on every automation job, and we verify pressure sensitivity at the gate’s full travel. If you have kids or pets near the gate, this is not the place to cut corners.
Powder-coated aluminum with 316 stainless hardware. Not galvanized steel. Not painted cedar with zinc hinges. Aluminum doesn’t rust, and a marine-grade powder coat stands up to salt spray and UV. We’ll still recommend an annual rinse and hardware check, but a properly spec’d aluminum gate in the Bayside corridor should go 15 to 20 years before any serious repair. Cedar gates near the water need restaining every two to three years and hardware replacement far sooner.
Once a year minimum, twice if you’re within a mile of Port Gardner Bay. We inspect terminal connections, test the reversing edges, lube pivot points with marine-grade grease, and check the board for early corrosion. Annual maintenance here runs $180-$320 and catches small problems before they become a $900 board replacement. Call (626) 649-4572 to schedule a maintenance visit.
Contact Latch & Post Gate Repair in Everett
If your gate is sagging, rusting, or not opening when you press the remote, call (626) 649-4572. A live person answers, day or night, no voicemail. We’ll schedule a site visit, give you a written price before any work begins, and if we’re stepping inside your home we’ll put on shoe covers and lay drop cloths. Every installation is covered by the 365-Day Done Right Promise. That’s how it should work in Everett.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Everett since 2009.