Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across East Los Angeles
A new gate installation in East Los Angeles typically runs between $1,850 and $6,400, depending on whether you’re replacing a pedestrian gate, automating a driveway gate, or building the post footings from scratch. We install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates throughout East LA, and most standard swing gate installations are completed in one to two days. If you’re dealing with a sagging ornamental iron gate or a 40-year-old post that has finally given out, call us at (626) 649-4572 and we’ll give you a written price before any work begins.
Why Latch & Post Gate Repair Is East Los Angeles’s Preferred Gate Installation Company
We work on a lot of gates in East Los Angeles, and what we see most often is the same story repeated block after block: a beautiful wrought iron gate built in the 1970s or 1980s, original post footings going soft, and a homeowner who wants to keep the gate but needs the structure rebuilt around it. Our crews know that East LA gates are not tract-home hardware. They were welded by hand in neighborhood shops that are mostly gone now, and every install has to respect that. When we quote a job, we account for the condition of the CMU wall, the post, and the gate leaf itself before we ever talk about an operator.
Cody Beckman leads our gate installation work, and he built our process around one question: what would a careful neighbor do? That’s why we lay drop cloths and put on shoe covers before stepping inside your home. That’s why we explain the price in writing before we start, and why we send a photo of the clean-up before we leave. It’s the Cedarwell C.A.R.E. routine on every single visit.
We answer our own phone, 24 hours a day. Not a call center. Not a voicemail that says we’ll call you Monday. When you call (626) 649-4572 about a gate in East Los Angeles, a live person picks up and schedules the visit. Our Gate Installation team is background-checked, uniformed, and factory-trained on the brands East LA families actually own, including LiftMaster, Viking, and DoorKing.
Gate Fabrication in East Los Angeles
Gate fabrication in East Los Angeles almost always means building something that no catalog carries. Many ornamental iron gates here were made by small local welding shops that closed decades ago, so replacement hinges, mounting plates, and scrollwork pieces simply don’t exist. We fabricate them in the field. If your gate needs a new hinge post base, a custom operator bracket, or a repaired section of rusted scrollwork, we cut, weld, and shape the steel to match the original as closely as possible. Most field fabrication for a standard ornamental iron gate in East Los Angeles runs $350 to $950, not including the cost of any operator or new structural post work.
Custom Hinge Plates and Mounting Brackets
Add a new automatic opener to a 1970s ornamental iron gate and the first problem is that today’s catalog mounting brackets don’t line up with 40-year-old picket spacing. We hand-fabricate every bracket. Dimensional steel, cut to length, drilled on site, and welded or bolted to match the exact hinge geometry of your existing gate leaf.
Rusted Scrollwork and Post Repairs
East LA heat bakes moisture out of old paint faster than coastal neighborhoods, and rust gets into the scrollwork welds first. We can cut out the fatigued section and weld in new matching steel. But if the corrosion has spread through more than a third of the gate’s structural members, replacement is usually cheaper than chasing rust forever.
Automatic Gate Installation in East Los Angeles
Automatic gate installation in East Los Angeles often means retrofitting an opener onto a gate that was never designed for one. East LA’s older ornamental iron gates were built heavy; automation for a single leaf swing gate typically runs $2,900 to $5,600 installed, including the operator, keypad or remote entry, safety edges, and the custom fabrication needed to mount everything. The exact figure depends on whether we need to rebuild the hinge post first, which is common.
Operators That Work With What You Already Have
We install and program operators from LiftMaster, Viking, Ghost Controls, DoorKing, and Elite. These are the brands we stock parts for, and they’re the ones suited to the weight and duty cycle of East LA’s iron gates. Before we recommend a model, we measure the leaf, weigh it, and check the existing power run and post condition.
Entrapment Protection and County Requirements
New automatic gate installations in unincorporated LA County must include entrapment protection. We install monitored safety edges and photo eyes as standard, the same way we would on any new installation. If you’re automating an old manual gate, we’ll bring the whole assembly up to current requirements as part of the quote.
Trusted Brands We Service in East Los Angeles
We’re factory-trained on the brands that East Los Angeles homeowners actually have bolted to their driveway gates: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. For this page we’ll name Viking, Ghost Controls, and DoorKing specifically, because those are the three we replace control boards on most often in East LA. Viking operators are common on older single-family driveway gates here, and the control boards fail predictably after years of inland heat. Ghost Controls and DoorKing show up on newer installs and rentals. We keep the common boards, remotes, and safety accessories for these brands stocked locally, so we don’t have to order a part and disappear for two weeks.
Common Gate Installation Problems We See in East Los Angeles Homes
- Heaving hinge posts that crack the CMU wall. East LA homes built between the 1920s and 1960s almost always have concrete block perimeter walls, and the original gate posts were set into those walls with footings that have now cracked. A new gate will pull loose within months unless we rebuild the post footing and wall cap first.
- Operators bolted onto rusted gates. We routinely see cases where someone installed a new opener on a gate with corroded hinge welds. The operator works until the gate scrapes the driveway, then the gear strips. The gate itself has to be sound before automation goes on.
- Santa Ana grit packed into rollers and hinges. East LA sits inland enough that Santa Ana winds deposit fine dust into every moving part. Hinges seize, slide gate rollers grind flat, and latch mechanisms jam shut. A gate that worked in June may not budge by October.
- Discontinued hardware with no replacement parts. If your gate was built by a local shop in the 1980s, the hardware was custom. Track wheels, latch assemblies, and hinge bearings were made to order. We can’t order replacements, because they were never in a catalog. We fabricate new ones to match.
Pricing for Gate Installation in East Los Angeles, CA
A new pedestrian gate in East Los Angeles typically runs $1,200 to $2,800 installed, including the gate, hardware, and basic frame or post work. Driveway gates, especially automatic swing or slide gates, land between $3,500 and $6,400 depending on the gate size, operator choice, and whether we’re rebuilding post footings. Double gates run higher than singles because of the second leaf and the added hardware. Custom fabrication work, like new hinge plates or rusted scrollwork replacement, adds $350 to $950 on top of the gate itself. Every quote is written and agreed to before any work starts. Call (626) 649-4572 for a free estimate, and we’ll give you the exact number in writing.
We Also Serve Cities Near East Los Angeles
We’re based out of the Los Angeles metro area and serve East Los Angeles as our core coverage area. We also take gate installation jobs in nearby cities including Los Angeles, San Diego, San Jose, and San Francisco. Crews are scheduled regionally, and our phone is answered live 24/7 no matter which city the job is in.
Serving East Los Angeles, CA - Our Local Coverage Area
We’re based in the East Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in East Los Angeles
Yes, in most cases. East Los Angeles is unincorporated LA County, not the City of Los Angeles, so gate and fence permits run through LA County Building & Safety rather than LADBS. That distinction catches a lot of homeowners and out-of-area contractors off guard. We handle the permit paperwork for you and the cost is included in your written quote. Call (626) 649-4572 and we’ll confirm what your specific address requires.
Almost always, yes. The original shop may be gone, but the gate itself is usually made from solid steel that’s thicker than most modern hardware. We evaluate the post and hinge condition first, fabricate the mounting brackets on site, and then install a LiftMaster, Viking, or Ghost Controls operator that matches the leaf weight. It’s standard work for us in East Los Angeles.
Because the problem usually isn’t the gate. It’s the post footing. East LA’s older CMU perimeter walls and post footings crack and heave from years of inland heat expansion and seasonal temperature swings. The gate leaf is fine, but the post is slowly tilting. We rebuild the footing and anchor the post properly, which stops the recurring sag.
Yes. Current UL 325 standards and LA County codes require monitored entrapment protection on automatic gates. We install photo eyes and safety edges as part of every automatic gate installation in East Los Angeles. If you’re automating an older manual gate, we bring the entire assembly into compliance before we leave.
Yes, with the right operator and protection. East LA regularly hits 95°F and higher in summer, which accelerates rust and stresses older control boards. Santa Ana winds pack abrasive grit into hinges and rollers. We select operators rated for the gate’s weight and duty cycle, and we recommend protective covers where heat exposure is a factor. The right install holds up for years here.
If your East Los Angeles gate needs replacement, automation, or structural work, call us at (626) 649-4572. We’ll come out, give you a written price, and answer any questions about the job. Estimates are free, and we always honor the price we quote.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving East Los Angeles gate owners with the Cedarwell Care Promise.